Opens in a new tab

LM336MX-5.0

5.0V shunt reference, +/-1%, 0.6Ohm, 4-6V adjustable, SOIC-8

1090

Effective Inventory

Image for reference only

Manufacturer Part:

LM336MX-5.0

Package:

SOIC-8 / D-8 (4.9 x 3.9 x 1.5 mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM336MX-5.0 from Texas Instruments is a precision 5.0V shunt voltage reference diode in an SOIC-8 package. With +/-1% initial accuracy, 0.6 Ohm dynamic impedance, and adjustable output from 4V to 6V via a third terminal, it provides a stable 5V reference for ADCs, DACs, and power supply circuits.

Key Specifications

Reference Voltage 5.0V nominal
Initial Accuracy +/-1% (A grade)
Adjustable Output Range 4V to 6V (via ADJ pin)
Operating Current Range 600 uA to 10 mA
Dynamic Impedance 0.6 Ohm typical
Temperature Coefficient 20 ppm/C typical
Temperature Stability 6 mV max over 0 to 70C
Long-Term Stability 20 ppm typical
Operating Temperature 0 to 70 C
Package SOIC-8 (D)

Features

  • Precision 5.0V shunt reference
  • +/-1% initial accuracy
  • Adjustable output: 4V to 6V
  • Low dynamic impedance: 0.6 Ohm
  • Wide operating current: 600uA to 10mA
  • Low temperature coefficient: 20ppm/C
  • Third terminal for voltage and tempco trimming
  • Fast turn-on
  • Operates as positive or negative reference

Applications

  • 5V ADC/DAC voltage reference
  • Digital voltmeter reference
  • Power supply voltage monitoring
  • Precision current source reference
  • Op amp bias reference
Product Introduction: LM336MX-5.0 Product Introduction

The LM336MX-5.0 from TI is a precision 5.0V shunt voltage reference in SOIC-8. Offers +/-1% initial accuracy, 0.6 Ohm dynamic impedance, and 20ppm/C temperature coefficient. Adjustable from 4V to 6V via the ADJ pin for voltage and temperature coefficient trimming. Operates from 600uA to 10mA shunt current. MX suffix denotes SOIC-8 tape-and-reel. Useful as a stable 5V reference for ADCs, DACs, and digital voltmeters.

Working Principle: LM336MX-5.0 Working Principle

The LM336-5.0 operates as a shunt regulator, similar to a precision Zener diode. Internally, it uses a bandgap reference circuit that provides a stable 5.0V breakdown voltage with much lower dynamic impedance (0.6 Ohm) and temperature coefficient (20ppm/C) than a conventional Zener diode. The ADJ (adjust) pin is connected to the internal bandgap node through a resistor divider, allowing external trimming of both the output voltage and temperature coefficient. Connecting a 10kOhm potentiometer between the ADJ pin and the output allows fine-tuning the voltage. Connecting two diodes in series with the pot can minimize the temperature coefficient when adjusted to exactly 5.0V.

Pin Description: LM336MX-5.0 Pin Definition and Functions
Pin Name Type Function
1 ADJ Input Adjust terminal (for voltage/tempco trimming)
2 V+ Output Positive terminal (cathode)
3 V- Ground Negative terminal (anode)
4-8 NC – No connect
Application Scenarios: In which products and applications is LM336MX-5.0 used
  • 5V ADC reference for 10-bit data acquisition systems
  • Digital voltmeter precision reference
  • Power supply output voltage monitoring comparator reference
  • Adjustable 4-6V reference for calibration circuits
  • Precision current source using shunt topology
Alternative Models: What chips are recommended as replacements for LM336MX-5.0
Manufacturer Part Number Package Notes
TI LM336Z-5.0/NOPB TO-92 TO-92 through-hole version
TI LM336BZ-5.0 TO-92 Higher accuracy B grade
ADI LT1009CZ TO-92 2.5V version, compatible pinout

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1