Opens in a new tab

MCP6004T-I/ST

Quad 1MHz RRIO op amp, 1.8-6V, 100uA/ch, TSSOP-14

54398

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6004T-I/ST

Package:

TSSOP-14 / ST-14 (5.0 x 4.4 x 1.0 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP6004T-I/ST from Microchip Technology is a quad general-purpose CMOS operational amplifier with 1MHz gain bandwidth and rail-to-rail input/output in a TSSOP-14 package. Operating from 1.8V to 6V with only 100uA per channel quiescent current, it is designed for low-power, single-supply applications.

Key Specifications

Number of Channels 4
Gain Bandwidth Product 1 MHz
Slew Rate 0.6 V/us
Supply Voltage Range 1.8V to 6V
Quiescent Current per Channel 100 uA typical
Input Offset Voltage 4.5 mV max
Input Bias Current 1 pA typical
CMRR 76 dB typical
PSRR 86 dB
Input Voltage Noise 28 nV/sqrtHz @ 1kHz
Output Current 23 mA typical
Operating Temperature -40 to 125 C (I suffix)
Package TSSOP-14 (ST)

Features

  • Quad rail-to-rail input/output op amp
  • 1MHz gain bandwidth product
  • 1.8V to 6V single-supply operation
  • 100uA per channel quiescent current
  • 1pA input bias current (CMOS input)
  • 28nV/sqrtHz input noise
  • Unity gain stable
  • AEC-Q100 qualified (automotive versions available)
  • Extended temperature: -40 to 125C

Applications

  • Battery-powered signal conditioning
  • Portable instrumentation
  • Sensor interface amplifiers
  • Active filters
  • Analog front-end for data acquisition
Product Introduction: MCP6004T-I/ST Product Introduction

The MCP6004T-I/ST from Microchip is a quad 1MHz rail-to-rail CMOS op amp in TSSOP-14. Operates from 1.8-6V with 100uA per channel and 1pA input bias current. Features 4.5mV max offset, 76dB CMRR, and 28nV/sqrtHz noise. The I suffix denotes -40 to 125C industrial temperature range, T denotes tape-and-reel, ST denotes TSSOP-14. Ideal for low-power multi-channel signal conditioning in portable and battery-powered applications.

Working Principle: MCP6004T-I/ST Working Principle

Uses a CMOS input stage with complementary P-channel and N-channel differential pairs for rail-to-rail input common-mode range. The 1pA input bias current is achieved by the insulated MOS gate input. The output stage uses a common-source CMOS configuration for rail-to-rail output swing. Internal frequency compensation provides unity-gain stability with any capacitive load. The 1MHz GBW and 0.6V/us slew rate are optimized for low-power operation at 100uA per channel.

Pin Description: MCP6004T-I/ST Pin Definition and Functions
Pin Name Type Function
1 VOUT A Output Amplifier A output
2 IN- A Input Amplifier A inverting input
3 IN+ A Input Amplifier A non-inverting input
4 VIN+ B Input Amplifier B non-inverting input
5 IN- B Input Amplifier B inverting input
6 VOUT B Output Amplifier B output
7 VSS Power Negative supply / ground
8 VOUT C Output Amplifier C output
9 IN- C Input Amplifier C inverting input
10 IN+ C Input Amplifier C non-inverting input
11 IN+ D Input Amplifier D non-inverting input
12 IN- D Input Amplifier D inverting input
13 VOUT D Output Amplifier D output
14 VDD Power Positive supply (1.8-6V)
Application Scenarios: In which products and applications is MCP6004T-I/ST used
  • 4-channel sensor amplifier for data acquisition system
  • Multi-channel active filter bank for audio processing
  • Battery-powered 3.3V instrumentation quad amplifier
  • Photodiode array amplifier with 1pA bias current
  • Portable medical device signal conditioning
Alternative Models: What chips are recommended as replacements for MCP6004T-I/ST
Manufacturer Part Number Package Notes
Microchip MCP6004-I/P PDIP-14 Through-hole version
TI LM324DR SOIC-14 Industry standard quad, not RRIO
Microchip MCP6004T-E/ST TSSOP-14 Commercial temp (0-85C) version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1