Opens in a new tab

MCP4921-E/P

12-bit SPI DAC, 1ch, 4.5us settling, ext VREF, PDIP-8, 2.7-5.5V

5181

Effective Inventory

Image for reference only

Manufacturer Part:

MCP4921-E/P

Package:

PDIP-8 / P-8 (9.27 x 6.35mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP4921-E/P from Microchip Technology is a single-channel 12-bit voltage output DAC with SPI interface in a PDIP-8 through-hole package. Operating from 2.7V to 5.5V with only 175µA typical supply current, it features an external voltage reference input, 4.5µs settling time, and ±2 LSB INL typical accuracy.

Key Specifications

Resolution 12 bits
Number of Channels 1
Interface SPI (Mode 0 and Mode 3)
Supply Voltage 2.7V to 5.5V
Supply Current 175 µA typical
INL (Typical) ±2 LSB
DNL (Max) ±0.75 LSB
Output Settling Time 4.5 µs (to ±0.5 LSB)
Output Voltage Range 0V to VREF (with rail-to-rail output buffer)
External VREF Pin Yes
Shutdown Current 0.1 µA typical
Operating Temperature -40 to +125°C (E suffix)
Package PDIP-8 (P suffix)

Features

  • 12-bit resolution with 1-channel output
  • SPI interface (Mode 0,0 and 1,1) up to 20MHz
  • External voltage reference input
  • Rail-to-rail output buffer amplifier
  • 4.5µs fast settling time
  • 175µA low power consumption
  • 0.1µA shutdown mode
  • PDIP-8 through-hole package for prototyping
  • AEC-Q100 Grade 1 qualified (automotive)

Applications

  • Set point and offset adjustment
  • Sensor calibration and trimming
  • Motor speed control
  • Programmable voltage source
  • Audio volume control
Product Introduction: MCP4921-E/P Product Introduction

The MCP4921-E/P from Microchip is a 12-bit single-channel voltage output DAC with SPI interface in PDIP-8. Operates from 2.7-5.5V with 175µA supply current. Features external voltage reference input, 4.5µs settling time, ±2 LSB INL, and rail-to-rail output buffer. E suffix denotes extended temperature range (-40 to 125°C), P suffix denotes PDIP-8 package. Part of the MCP4901/4911/4921 family (8/10/12-bit variants). Ideal for sensor calibration and set-point control.

Working Principle: MCP4921-E/P Working Principle

The MCP4921 uses a resistor-string DAC architecture where the 12-bit digital code selects a tap point on a precision resistor ladder to produce the output voltage. The selected voltage is buffered by a rail-to-rail output amplifier that can drive loads as low as 1kΩ. The SPI interface accepts a 16-bit command word: 4 configuration bits (write/ignore, buffered VREF, output gain 1x/2x, shutdown) followed by 12 data bits. The LDAC pin allows synchronous update of the DAC output from the input register. The SHDN bit in the command word can place the device in 0.1µA shutdown mode while preserving the register contents.

Pin Description: MCP4921-E/P Pin Definition and Functions
Pin Name Type Function
1 VDD Power Positive supply (2.7-5.5V)
2 CS# Input Chip select (active low)
3 SCK Input SPI serial clock
4 SDI Input SPI serial data input
5 LDAC# Input Latch DAC input (active low, synchronous update)
6 VOUT Output Analog voltage output
7 AVSS Ground Analog ground
8 VREF Input External voltage reference input
Application Scenarios: In which products and applications is MCP4921-E/P used
  • Adjustable voltage reference for sensor bias with SPI-controlled setpoint
  • Motor speed control via 0-5V analog command signal
  • Portable instrument calibration with 12-bit accuracy
  • Audio volume control with log-scale DAC lookup
  • Battery-powered test equipment programmable source
Alternative Models: What chips are recommended as replacements for MCP4921-E/P
Manufacturer Part Number Package Notes
Microchip MCP4921-E/SN SOIC-8 SOIC SMD version
Microchip MCP4922-E/P PDIP-14 Dual-channel 12-bit DAC
TI DAC7611P PDIP-8 12-bit DAC with internal reference

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1