Opens in a new tab

RT9728BHGQW

120mOhm USB power switch, adj 75mA-1.8A OCP, WDFN-6 (2x2mm)

1846

Effective Inventory

Image for reference only

Manufacturer Part:

RT9728BHGQW

Package:

WDFN-6L / HGQW-6 (2.0 x 2.0 x 0.75mm, 0.65mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The RT9728BHGQW from Richtek is a 120mΩ P-MOSFET high-side power switch with adjustable current limit in a WDFN-6 (2x2mm) package. Designed for USB power distribution, it supports 75mA to 1.8A programmable current limiting with ±10% accuracy, built-in soft-start, and fault flag output.

Key Specifications

Switch Type P-Channel MOSFET (high-side)
RDS(on) Typical 120 mΩ
Maximum Output Current 1.8 A
Adjustable Current Limit Range 75 mA to 1.8 A (via RILIM resistor)
Current Limit Accuracy ±10%
Input Voltage Range 2.5V to 5.5V
Quiescent Current 120 µA typical
Shutdown Current 1 µA max
Fault Flag Output Yes (active low, open-drain)
Soft-Start Built-in
ESD Protection 15 kV IEC 61000-4-2 (with ext. cap)
Operating Temperature -40 to +125°C (TJ)
Package WDFN-6L (2x2mm, exposed pad)

Features

  • 120mΩ low on-resistance P-MOSFET switch
  • Adjustable current limit: 75mA to 1.8A via external resistor
  • ±10% current limit accuracy
  • Meets USB current limiting requirements
  • Built-in soft-start to limit inrush current
  • Active-high enable input
  • Fault flag output (open-drain)
  • Reverse input-output voltage protection
  • Under-voltage lockout (UVLO)
  • Thermal shutdown protection
  • 15kV ESD protection (IEC 61000-4-2)
  • Nemko IEC 62368-1 approved

Applications

  • USB bus/self-powered hub ports
  • USB peripheral power distribution
  • ACPI power distribution
  • Battery-powered equipment
  • Set-top boxes and 3G data cards
Product Introduction: RT9728BHGQW Product Introduction

The RT9728BHGQW from Richtek is a 120mΩ P-MOSFET high-side power switch with adjustable current limiting in WDFN-6 (2x2mm). Supports 75mA to 1.8A programmable current limit via external RILIM resistor with ±10% accuracy. 2.5-5.5V input range, 120µA quiescent current, built-in soft-start, fault flag output, and 15kV ESD protection. HGQW suffix denotes WDFN-6 2x2mm tape-and-reel. Ideal for USB port power distribution and hot-plug applications.

Working Principle: RT9728BHGQW Working Principle

The RT9728B uses an internal P-channel MOSFET as the high-side switch between VIN and VOUT. The current limit is set by connecting an external resistor (RILIM) from the ILIM pin to ground. The internal current sense circuit mirrors a fraction of the load current and compares it against the ILIM reference. When the load current exceeds the set threshold, the switch enters constant-current mode, limiting the output current and asserting the FAULT flag (open-drain, active low). The built-in soft-start circuit ramps the output voltage gradually to limit inrush current into capacitive loads. UVLO disables the switch when VIN drops below 2.2V. Thermal shutdown protects the device at approximately 140°C junction temperature.

Pin Description: RT9728BHGQW Pin Definition and Functions
Pin Name Type Function
1 OUT Output Switch output (to load)
2 GND Ground Ground
3 EN Input Enable (active high)
4 ILIM Input Current limit set (resistor to GND, or connect to VIN for 75mA)
5 FAULT# Output Fault flag (open-drain, active low)
6 IN Power Input supply (2.5-5.5V)
Application Scenarios: In which products and applications is RT9728BHGQW used
  • USB 2.0 port power switch with 500mA current limit
  • USB 3.0 port with 900mA current limit
  • Hot-plug power distribution for PC peripheral bays
  • Battery-powered device load switch with current protection
  • Set-top box USB port with adjustable current limit
Alternative Models: What chips are recommended as replacements for RT9728BHGQW
Manufacturer Part Number Package Notes
Richtek RT9728BHGE SOT-23-6 SOT-23-6 package version
TI TPS2041BDRB SOT-23-5 Similar USB power switch
onsemi NCP380LSNAJAAT1G WDFN-6 Adjustable OCP, similar package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1