Opens in a new tab

TLV62084ADSGT

2A sync buck, 2.7-6Vin, 0.5-4Vout, 2MHz, DCS-Control, WSON-8 2x2mm

6767

Effective Inventory

Image for reference only

Manufacturer Part:

TLV62084ADSGT

Package:

WSON-8 / DSG-8 (2.0 x 2.0 x 0.8mm, 0.5mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLV62084ADSGT from Texas Instruments is a 2A high-efficiency synchronous step-down converter with 2.7-6V input and 0.5-4V adjustable output in a 2x2mm WSON-8 package. Using DCS-Control architecture, it achieves up to 95% efficiency with 2MHz switching frequency and 100% duty cycle for lowest dropout.

Key Specifications

Topology Synchronous Buck (DC-DC Step-Down)
Input Voltage Range 2.7V to 6V
Output Voltage Range 0.5V to 4V (adjustable)
Output Current 2 A maximum
Switching Frequency 2 MHz
Efficiency (Typical) Up to 95%
Quiescent Current 22 µA (PFM mode)
100% Duty Cycle Yes (for lowest dropout)
Power Good Output Yes
Output Discharge Yes
Operating Temperature -40 to +125°C
Package WSON-8 / DSG (2x2mm, exposed pad)

Features

  • DCS-Control architecture for fast transient response
  • 2.7-6V input, 0.5-4V adjustable output
  • 2A maximum output current
  • 2MHz fixed switching frequency
  • Integrated synchronous rectifier (no external Schottky)
  • Power-save mode (PFM) for light-load efficiency
  • 100% duty cycle mode for lowest dropout
  • Power Good output indicator
  • Output discharge function
  • Thermal shutdown and overcurrent protection
  • Only 4.7µH inductor + 10µF output capacitor needed

Applications

  • Battery-powered portable devices
  • Point-of-load (POL) regulators
  • SSD and storage power supplies
  • PC and server subsystems
  • Set-top box power rails
Product Introduction: TLV62084ADSGT Product Introduction

The TLV62084ADSGT from TI is a 2A synchronous buck converter in 2x2mm WSON-8. Input range 2.7-6V with 0.5-4V adjustable output. DCS-Control architecture provides fast transient response with seamless PWM/PFM transition. 2MHz switching frequency minimizes inductor size (4.7µH). Integrated synchronous rectifier eliminates external Schottky diode. 100% duty cycle for lowest dropout. Power Good output and output discharge. DSGT suffix denotes WSON-8 tape-and-reel. Ideal for space-constrained POL converters.

Working Principle: TLV62084ADSGT Working Principle

Uses TI’s DCS-Control (Direct Control with Seamless transition) architecture, which combines voltage-mode control with a direct output voltage feedback path. In PWM mode, the device operates at 2MHz fixed frequency with peak current mode control for stability. When the load current drops below the PFM threshold, the device transitions seamlessly to Pulse Frequency Modulation mode, skipping pulses to maintain efficiency at light loads (22µA quiescent current). The 100% duty cycle mode turns the high-side MOSFET on continuously when the input voltage approaches the output voltage, minimizing dropout. The Power Good comparator monitors the output voltage via the FB pin and asserts PG when output is within 10% of the target.

Pin Description: TLV62084ADSGT Pin Definition and Functions
Pin Name Type Function
1 EN Input Enable (active high, internal pull-down)
2 VIN Power Input supply (2.7-6V)
3 SW Output Switch node (connect to inductor)
4 PGND Ground Power ground
5 FB Input Feedback voltage (adjust output via resistor divider)
6 PG Output Power Good output (open-drain)
7 AGND Ground Analog ground
8 Pad Ground Exposed thermal pad (connect to PGND)
Application Scenarios: In which products and applications is TLV62084ADSGT used
  • 3.7V Li-Ion to 1.8V POL converter for SSD controller at 2A
  • 5V to 3.3V step-down for MCU and peripheral rail at 2A
  • Single-cell Li-Ion to 1.2V core voltage for FPGA at 2A
  • 5V USB to 1.5V DDR memory rail with PFM light-load efficiency
  • Portable instrument 3.3V rail from 2S Li-Ion (6V max)
Alternative Models: What chips are recommended as replacements for TLV62084ADSGT
Manufacturer Part Number Package Notes
TI TLV62080DSGT WSON-8 1.2A version, same footprint
TI TPS62080DSGT WSON-8 Improved version of TLV62080
Monolithic Power MP2143GD QFN-8 (2×2) 2A, 2.5-6V, similar specs

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1