Opens in a new tab

Home » Integrated Circuits ICs, Power Switches » MT25QL128ABA1EW7-0SIT

MT25QL128ABA1EW7-0SIT

128Mb SPI NOR Flash, Quad I/O, 133MHz, 90MB/s, W-PDFN-8 6x5mm

4000

Effective Inventory

Image for reference only

Manufacturer Part:

MT25QL128ABA1EW7-0SIT

Package:

W-PDFN-8 / MLP8-8 (6.0 x 5.0 x 0.8mm, 1.27mm pitch, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MT25QL128ABA1EW7-0SIT from Micron Technology is a 128Mb (16MB) 3V multiple I/O serial NOR Flash memory in an 8-pin W-PDFN (6x5mm) package. Supporting SPI, Dual SPI, and Quad SPI interfaces at up to 133MHz clock frequency, it delivers up to 90MB/s read throughput with execute-in-place (XIP) capability.

Key Specifications

Memory Density 128 Mbit (16 MB)
Memory Organization 16M × 8 bits
Interface SPI / Dual I/O / Quad I/O
Max Clock Frequency (STR) 133 MHz
Max Clock Frequency (DTR) 90 MHz
Max Read Throughput 90 MB/s (Quad I/O, STR)
Supply Voltage 2.7V to 3.6V
Sector Organization 64KB sectors, 4KB/32KB subsectors
Erase/Program Cycles 100,000 minimum per sector
Data Retention 20 years typical
OTP Area 64 bytes (user-lockable)
JEDEC ID BA18h (3-byte signature)
Operating Temperature -40 to +85°C (IT suffix)
Package W-PDFN-8 (6 x 5mm, exposed pad)

Features

  • 128Mb (16MB) SPI NOR Flash
  • Single/Dual/Quad SPI with STR and DTR modes
  • 133MHz max clock in STR, 90MHz in DTR
  • Execute-in-Place (XIP) support
  • Program/Erase Suspend capability
  • 4KB, 32KB, and 64KB erase granularity
  • 64-byte lockable OTP area
  • Volatile and non-volatile configuration registers
  • Password protection and sector locking
  • Hardware RESET# and HOLD# pins
  • JESD47H compliant, 100K erase cycles

Applications

  • Embedded system boot Flash
  • FPGA configuration storage
  • Industrial firmware storage
  • IoT device code and data storage
  • Automotive ECU program memory
Product Introduction: MT25QL128ABA1EW7-0SIT Product Introduction

The MT25QL128ABA1EW7-0SIT from Micron is a 128Mb (16MB) 3V multiple I/O serial NOR Flash in W-PDFN-8 (6x5mm). Supports SPI/Dual/Quad I/O at up to 133MHz STR with 90MB/s read throughput. Execute-in-place (XIP) and DTR modes up to 90MHz. 64KB sector/4KB subsector erase. 100K erase cycles with 20-year retention. 64-byte OTP area. L suffix denotes 2.7-3.6V, E suffix denotes 64KB sectors with 4KB/32KB subsectors, W7 suffix denotes W-PDFN 6x5mm package, IT suffix denotes -40 to 85°C industrial temp.

Working Principle: MT25QL128ABA1EW7-0SIT Working Principle

The MT25QL128 uses a serial peripheral interface (SPI) for command/address/data transfer. In standard SPI mode, data is transferred on a single data line (SI/SO) at up to 133MHz. Dual I/O mode uses two data lines for 2x throughput, and Quad I/O mode uses four data lines (SI, SO, SIO2, SIO3) for 4x throughput, achieving up to 90MB/s at 133MHz. The device supports both Single Transfer Rate (STR) and Double Transfer Rate (DTR) modes — in DTR, data is captured on both rising and falling clock edges. The XIP feature allows the host MCU/FPGA to execute code directly from the Flash without first copying to RAM. Program/Erase Suspend allows interrupting a long erase operation to read or program a different sector. The HOLD# pin pauses serial communication without deselecting the device, and RESET# provides hardware reset.

Pin Description: MT25QL128ABA1EW7-0SIT Pin Definition and Functions
Pin Name Type Function
1 S# (Chip Select) Input Chip select (active low)
2 SIO1/SO (Data Out) I/O Serial data output / SIO1 in quad mode
3 SIO2 (Data 2) I/O SIO2 in quad mode / HOLD# function
4 VSS (Ground) Ground Ground
5 SIO0/SI (Data In) I/O Serial data input / SIO0 in quad mode
6 SCK (Clock) Input Serial clock (up to 133MHz)
7 SIO3 (Data 3) I/O SIO3 in quad mode / RESET# function
8 VCC (Supply) Power Supply voltage (2.7-3.6V)
Pad Exposed Pad Ground Thermal pad (connect to ground plane)
Application Scenarios: In which products and applications is MT25QL128ABA1EW7-0SIT used
  • ARM Cortex-M7 XIP boot Flash at 133MHz Quad SPI for instant-on execution
  • Xilinx 7-series FPGA configuration storage via Quad SPI master
  • Industrial PLC firmware update storage with sector-level protection
  • IoT gateway OTA update Flash with suspend/resume capability
  • Automotive ECU program memory with password-protected sectors
Alternative Models: What chips are recommended as replacements for MT25QL128ABA1EW7-0SIT
Manufacturer Part Number Package Notes
Micron MT25QL256ABA1EW7-0SIT W-PDFN-8 256Mb density upgrade, same package
Winbond W25Q128JVEIM DFN-8 (6×5) Pin-compatible 128Mb alternative
Macronix MX25L12833FMI-08G DFN-8 (6×5) 133MHz Quad SPI, compatible

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1