Opens in a new tab

BQ29707DSET

Single-cell Li-ion/Li-Po battery protection IC with OVP/UVP/OCC/OCD/SCP, 4µA Iq, 6-WSON (1.5×1.5mm)

3198

Effective Inventory

Image for reference only

Manufacturer Part:

BQ29707DSET

Package:

WSON (DSE) | 6 pins (1.50 x 1.50 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BQ29707DSET from Texas Instruments is a cost-effective voltage and current protection IC for single-cell lithium-ion and lithium-polymer batteries. Packaged in a tiny 6-pin WSON (DSE) package measuring just 1.5 x 1.5 mm, it provides overcharge, overdischarge, overcurrent, and short-circuit protection with factory-set thresholds and a low operating current of 4 µA.

Key Specifications

Number of Cells 1
Operating Current (Typ) 4 µA
Shutdown Current 100 nA
Supply Voltage (Max) 8 V
Protection Features OVP, UVP, OCC, OCD, SCP
FET Drive CHG and DSG (low-side N-ch)
Operating Temperature -40°C to +85°C
Package WSON (DSE) | 6 pins

Features

  • Factory-set fault protection thresholds and timers
  • Overcharge detection (OVP) and overdischarge detection (UVP)
  • Charge overcurrent (OCC) and discharge overcurrent (OCD) detection
  • Load short-circuit detection (SCP)
  • Zero-volt charging detection for depleted batteries
  • CHG and DSG FET drive outputs
  • Ultra-low shutdown current of 100 nA
  • Small 1.5 x 1.5 mm WSON package

Applications

  • Single-cell Li-ion/Li-Po battery packs
  • Smartphones and tablets
  • Wearable devices
  • Portable electronics
  • Battery-powered medical devices
Product Introduction: BQ29707DSET Product Introduction

The BQ29707DSET is a cost-effective voltage and current protection integrated circuit from Texas Instruments designed for single-cell lithium-ion and lithium-polymer battery packs. It provides comprehensive protection including overcharge (OVP), overdischarge (UVP), charge overcurrent (OCC), discharge overcurrent (OCD), and short-circuit (SCP) detection. The device monitors external power FETs and provides drive outputs for both charge (CHG) and discharge (DSG) FETs, operating at just 4 µA in normal mode and 100 nA in shutdown mode.

Working Principle: BQ29707DSET Working Principle

The BQ29707 operates through three main subsystems: (1) Voltage Monitoring: Continuously measures cell voltage through the VCC pin, comparing against factory-set OVP and UVP thresholds to protect against overcharge and overdischarge conditions. (2) Current Sensing: Detects overcurrent conditions by monitoring the voltage drop across an external sense resistor between the CS and VSS pins, with ±5mV accuracy for OCD and OCC detection. (3) FET Control: Drives the CHG and DSG FET gate outputs to disconnect the battery when a fault is detected, with configurable fault timers and recovery conditions for each protection type.

Pin Description: BQ29707DSET Pin Definition and Functions
Pin Name Type Description
1 CS Input Current sense input for overcurrent detection
2 VCC Power Supply voltage / cell voltage input
3 DSG Output Discharge FET gate drive
4 CHG Output Charge FET gate drive
5 VSS Ground Ground reference
6 NC No Connect Not connected (thermal pad to VSS)
Application Scenarios: In which products and applications is BQ29707DSET used
  • Single-cell Li-ion battery pack protection in smartphones and wearables
  • Portable medical device battery safety
  • Bluetooth headset battery management
  • IoT device battery protection with minimal footprint
  • Portable instrument battery packs requiring comprehensive fault detection
Alternative Models: What chips are recommended as replacements for BQ29707DSET
Model Manufacturer Cells Package Notes
BQ2970XDSET TI 1 6-WSON Different threshold variant
S-8261ABJMD Seiko 1 SOT-23-6 Popular alternative
AP9211SA-AD Diodes Inc 1 SOT-23-6 Pin-compatible option
R5460N153D Ricoh 1 DFN-8 Higher precision option

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1