Opens in a new tab

LMH5401IRMST

8GHz fully differential amplifier, 17500V/µs SR, 1.25nV/√Hz, SE-DE conversion, UQFN-14

3463

Effective Inventory

Image for reference only

Manufacturer Part:

LMH5401IRMST

Package:

UQFN-14 (3.0 x 3.0 x 0.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LMH5401IRMST from Texas Instruments is an 8-GHz ultra-wideband fully differential amplifier optimized for RF, IF, and high-speed time-domain applications. With 17,500 V/µs slew rate and 1.25 nV/√Hz input noise, it delivers exceptional linearity from DC to 2 GHz in a compact UQFN-14 package, consuming only 275 mW at 5V supply.

Key Specifications

Gain Bandwidth Product 8 GHz
Slew Rate 17,500 V/µs
Input Voltage Noise 1.25 nV/√Hz
HD2 (100MHz, 1VPP) -104 dBc
HD3 (100MHz, 1VPP) -96 dBc
Supply Current 55 mA
Supply Voltage 3.3V to 5V
Operating Temperature -40°C to +85°C
Package UQFN-14 (3.0 x 3.0 mm)

Features

  • 8 GHz gain bandwidth product
  • 17,500 V/µs slew rate
  • Very low HD2/HD3 distortion to 2 GHz
  • 1.25 nV/√Hz input voltage noise
  • Single-ended to differential (SE-DE) conversion
  • Common-mode reference input for ADC alignment
  • Power-down feature for power savings
  • Only 275 mW power consumption at 5V

Applications

  • GSPS ADC driver
  • High-speed data acquisition
  • Broadband communications
  • IF/RF gain blocks and SAW filter buffers
  • Test and measurement equipment
  • 1GbE over microwave ADC driver
Product Introduction: LMH5401IRMST Product Introduction

The LMH5401IRMST is a very high-performance fully differential amplifier from Texas Instruments, optimized for RF, IF, and high-speed DC-coupled time-domain applications. With an 8 GHz gain bandwidth product and 17,500 V/µs slew rate, it provides unprecedented usable bandwidth from DC to 2 GHz. It is ideal for single-ended-to-differential (SE-DE) conversion when driving high-speed ADCs, generating extremely low second- and third-order distortion. The device consumes only 275 mW at 5V and includes a power-down feature.

Working Principle: LMH5401IRMST Working Principle

The LMH5401 operates through four key subsystems: (1) Differential Input Stage: A high-impedance differential input pair with 1.25 nV/√Hz noise density accepts single-ended or differential signals. The VOCM pin sets the output common-mode voltage to match ADC requirements. (2) Gain Stage: A voltage-feedback architecture provides 8 GHz GBP with programmable gain via external resistors. The device supports both SE-DE and DE-DE modes. (3) Output Stage: A low-distortion differential output driver achieves HD2 of -104 dBc and HD3 of -96 dBc at 100 MHz, capable of driving 200Ω loads directly. (4) Power Management: A PD (power-down) pin reduces supply current when the amplifier is not needed, and the device operates from single 3.3V to 5V or dual supplies.

Pin Description: LMH5401IRMST Pin Definition and Functions
Pin Name Type Description
1 VOCM Input Output common-mode voltage reference
2 VIN- Input Inverting input
3 VIN+ Input Non-inverting input
4 VSS Power Negative supply / ground
5 PD Input Power-down control (active high)
6 FB- Input Negative feedback node
7 VOUT- Output Negative differential output
8 VDD Power Positive supply (3.3V to 5V)
9 VOUT+ Output Positive differential output
10 FB+ Input Positive feedback node
11-14 NC/GND – No connect / ground pads
Application Scenarios: In which products and applications is LMH5401IRMST used
  • Driving GSPS ADCs in test and measurement equipment with SE-DE conversion
  • IF/RF gain block and SAW filter buffer in broadband communications
  • High-speed data acquisition front-end with DC to 2GHz bandwidth 1GbE microwave backhaul ADC driver Medical imaging and radar signal chain
Alternative Models: What chips are recommended as replacements for LMH5401IRMST
Model Manufacturer GBP SR Notes
THS4541IRMST TI 2GHz 1500V/µs Lower speed alternative
ADA4932-1 ADI 1GHz 2800V/µs Lower cost option
LMH5401IRMSR TI 8GHz 17500V/µs Larger reel option
THS4551IRMST TI 150MHz 400V/µs Precision low-noise FDA

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1