Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » LCMXO2-2000HC-4TG100C

LCMXO2-2000HC-4TG100C

MachXO2 FPGA, 2112 LUTs, 79 I/O, 75.8kbit RAM, UFM, instant-on, TQFP-100

11032

Effective Inventory

Image for reference only

Manufacturer Part:

LCMXO2-2000HC-4TG100C

Package:

TQFP-100 (14.0 x 14.0 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The LCMXO2-2000HC-4TG100C from Lattice Semiconductor is a MachXO2 family ultra-low-power non-volatile FPGA with 2112 LUTs, 79 I/O pins, 75.8 kbits total memory, and on-chip user flash. Built on 65nm process in a 100-pin TQFP package, it provides instant-on operation with boot times under 1ms and supports dual-boot capability from on-chip Flash.

Key Specifications

LUTs 2112
Distributed RAM 16 kbits
Embedded Block RAM (EBR) 74 kbits (9 EBR)
User Flash Memory (UFM) 64 kbits
PLLs 1
User I/O 79
Max Frequency 269 MHz
Supply Voltage 2.375V to 3.465V (core via internal regulator)
Operating Temperature 0°C to +85°C
Package TQFP-100 (14 x 14 mm)

Features

  • Instant-on: boot time less than 1ms
  • On-chip user flash memory (UFM)
  • Hardened SPI and I2C controllers
  • Hardened timer/counter
  • Dual-boot capability from on-chip Flash
  • TransFR (transparent field reconfiguration)
  • 1 PLL with multiply/divide
  • 65nm non-volatile low-power process
  • Pre-engineered source synchronous I/O (DDR/DDR2/LPDDR)

Applications

  • Bus bridging and I/O expansion
  • Power supply control and management
  • Display and video processing
  • Industrial control logic
  • Consumer electronics glue logic
Product Introduction: LCMXO2-2000HC-4TG100C Product Introduction

The LCMXO2-2000HC-4TG100C from Lattice Semiconductor is a MachXO2 family non-volatile FPGA with 2112 LUT4s, 79 user I/Os, and 75.8 kbits of total memory (74 kbits EBR + 16 kbits distributed RAM). Built on a 65nm low-power process, it features instant-on operation (boot time < 1ms), on-chip user flash memory (64 kbits), a hardened SPI controller, I2C controller, and timer/counter. The HC variant supports 3.3V or 2.5V external VCC with an internal core voltage regulator. It supports dual-boot and TransFR transparent field reconfiguration.

Working Principle: LCMXO2-2000HC-4TG100C Working Principle

The LCMXO2-2000HC operates through five key subsystems: (1) Programmable Logic: 2112 LUT4-based logic blocks organized in 264 PFUs (Programmable Functional Units) provide general-purpose combinatorial and sequential logic with carry chain support for arithmetic operations. (2) Memory Resources: 9 EBR (Embedded Block RAM) blocks provide 74 kbits of dual-port SRAM, while distributed RAM in PFUs adds 16 kbits for FIFOs and small buffers. 64 kbits of non-volatile UFM stores configuration and user data. (3) I/O Architecture: 79 sysI/O buffers support various standards including LVCMOS, LVTTL, LVDS, and DDR signaling with programmable drive strength and slew rate. (4) Clocking: One PLL with fractional multiply/divide generates precision clock frequencies from an on-chip oscillator or external reference. (5) Configuration: The device self-configures from on-chip Flash in < 1ms, also supporting JTAG, SPI, and I2C programming interfaces with dual-boot fail-safe capability.

Pin Description: LCMXO2-2000HC-4TG100C Pin Definition and Functions
Pin Group Count Type Description
I/O Bank 0-3 79 I/O Programmable user I/O pins (LVCMOS/LVDS/etc.)
VCC 8 Power Core/I/O supply (2.375V-3.465V for HC)
GND 6 Ground Ground connections
JTAG 4 Interface TCK, TMS, TDI, TDO for JTAG programming
NC 3 – No connect
Application Scenarios: In which products and applications is LCMXO2-2000HC-4TG100C used
  • Bus bridging and protocol conversion between different interface standards
  • Power supply sequencing and monitoring with instant-on capability
  • Display controller glue logic with DDR memory interface support
  • Industrial control and automation logic replacement for CPLDs
  • Consumer electronics I/O expansion with hardened SPI/I2C controllers
Alternative Models: What chips are recommended as replacements for LCMXO2-2000HC-4TG100C
Model Manufacturer LUTs Package Notes
LCMXO2-2000HC-5TG100C Lattice 2112 TQFP-100 Faster speed grade
LCMXO2-2000HC-6TG100C Lattice 2112 TQFP-100 Fastest speed grade
LCMXO2-2000ZE-1TG100C Lattice 2112 TQFP-100 Ultra-low power variant
LCMXO2-1200HC-4TG100C Lattice 1280 TQFP-100 Lower density, same package

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1