Opens in a new tab

MCP2551-I/SN

High-speed CAN transceiver, 1Mbps, ISO-11898, SOIC-8, 4.5-5.5V, -40 to 125C

6506

Effective Inventory

Image for reference only

Manufacturer Part:

MCP2551-I/SN

Package:

SOIC-8 (4.9 x 3.9 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP2551-I/SN from Microchip Technology is a high-speed CAN transceiver serving as the interface between a CAN protocol controller and the physical bus. Fully compliant with ISO-11898, it supports data rates up to 1 Mbps and can connect up to 112 nodes on a single bus. Housed in an 8-pin SOIC package, it features slope control, permanent dominant detection, thermal shutdown, and short-circuit protection.

Key Specifications

Data Rate Up to 1 Mbps
Standard ISO-11898
Supply Voltage 4.5V – 5.5V
Max Nodes 112
Slope Control External (RS pin)
Operating Temp -40 to 125 C (Industrial)
Package SOIC-8 (4.9 x 3.9 mm)

Features

  • 1 Mbps CAN communication with ISO-11898 compliance
  • Externally controlled slope for reduced RFI emissions
  • Permanent dominant detection on TXD input
  • Power-on reset and voltage brown-out protection
  • Unpowered node does not disturb the CAN bus
  • Short-circuit protection and automatic thermal shutdown

Applications

  • Automotive CAN bus networks (ECUs, body control modules)
  • Industrial automation and process control
  • Building automation systems
  • Medical equipment communication
  • Marine and agricultural vehicle networks
Product Introduction: MCP2551-I/SN Product Introduction

The MCP2551-I/SN from Microchip Technology is a high-speed CAN transceiver providing the physical layer interface between a CAN protocol controller and the differential CAN bus. Fully compliant with ISO-11898 including 24V requirements, it supports data rates up to 1 Mbps and can connect up to 112 nodes on a single bus. The device features externally controlled slope for RFI reduction, permanent dominant detection, brown-out protection, and automatic thermal shutdown. An unpowered node will not disturb the bus, ensuring system reliability.

Working Principle: MCP2551-I/SN Working Principle

The MCP2551-I/SN converts TTL/CMOS logic levels from a CAN controller to differential signals for the CAN bus. The transmitter drives CANH and CANL with complementary signals: dominant state creates a ~2V differential, while recessive state leaves both lines at ~2.5V. The receiver continuously monitors the bus differential voltage and outputs the detected state to RXD. The RS (slope control) pin allows external adjustment of output slew rate to minimize EMI. Protection circuits include thermal shutdown and current limiting during bus fault conditions.

Pin Description: MCP2551-I/SN Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data from CAN controller
2 VSS Ground Ground
3 VDD Power Supply voltage (4.5-5.5V)
4 RXD Output Receive data to CAN controller
5 VREF Output Reference voltage (~VDD/2)
6 CANL I/O CAN bus low-side line
7 CANH I/O CAN bus high-side line
8 RS Input Slope control / mode select
Application Scenarios: In which products and applications is MCP2551-I/SN used
  • Automotive CAN networks: ECU-to-ECU communication
  • Industrial automation: CAN-based fieldbus for PLCs and sensors
  • Building automation: HVAC and lighting control
  • Medical equipment: Inter-device communication requiring fault tolerance
Alternative Models: What chips are recommended as replacements for MCP2551-I/SN
Manufacturer Part Number Package Notes
NXP TJA1050T SOIC-8 Pin-compatible high-speed CAN
TI SN65HVD230DR SOIC-8 3.3V CAN transceiver
Microchip MCP2561-E/SN SOIC-8 CAN FD capable, 5Mbps
NXP TJA1042T SOIC-8 CAN FD, pin-compatible

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1