Opens in a new tab

MCP1826S-3302E/DB

1A LDO, 3.3V fixed, 250mV dropout, 120uA Iq, SOT-223-3, AEC-Q100

5582

Effective Inventory

Image for reference only

Manufacturer Part:

MCP1826S-3302E/DB

Package:

SOT-223-3 (6.5 x 3.5 x 1.7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MCP1826S-3302E/DB from Microchip Technology is a 1A low-dropout (LDO) voltage regulator with a fixed 3.3V output. It operates from 2.3V to 6V input with only 250 mV typical dropout at 1A, and features 120 uA typical quiescent current. The device is stable with a 1 uF ceramic output capacitor and is housed in a 3-pin SOT-223 package with AEC-Q100 qualification.

Key Specifications

Output Voltage 3.3V (fixed)
Output Current 1A
Input Voltage 2.3V – 6V
Dropout Voltage 250 mV (typ) @ 1A
Quiescent Current 120 uA (typ)
Accuracy +/-2%
Stability 1 uF ceramic output cap
Package SOT-223-3
Operating Temp -40 to 125 C
Qualification AEC-Q100

Features

  • 1A output current capability
  • Ultra-low dropout: 250 mV typical at 1A
  • Fixed 3.3V output with +/-2% accuracy
  • Low quiescent current: 120 uA typical
  • Stable with only 1 uF ceramic output capacitor
  • Short-circuit current limiting and thermal shutdown
  • AEC-Q100 qualified for automotive applications

Applications

  • Automotive electronic control units
  • Post-regulation for switching power supplies
  • Notebook computer power rails
  • Networking and interface card power
  • Portable computing devices
Product Introduction: MCP1826S-3302E/DB Product Introduction

The MCP1826S-3302E/DB from Microchip Technology is a 1A low-dropout linear regulator providing a fixed 3.3V output from a 2.3V to 6V input. With a typical dropout voltage of just 250 mV at full 1A load and 120 uA quiescent current, it delivers efficient regulation for battery-powered and automotive applications. The device is stable with only a 1 uF ceramic output capacitor, minimizing board space and BOM cost. CMOS construction ensures low ground current. AEC-Q100 qualification enables use in automotive electronic control units. The SOT-223-3 package provides excellent thermal dissipation in a compact footprint.

Working Principle: MCP1826S-3302E/DB Working Principle

The MCP1826S-3302E/DB uses a PMOS pass transistor in a linear regulator topology. The error amplifier compares a fraction of the output voltage against an internal bandgap reference, adjusting the PMOS gate voltage to maintain regulation. The low dropout voltage is achieved because the PMOS transistor does not require significant headroom between input and output. The 120 uA quiescent current powers the error amplifier, reference, and protection circuits. Short-circuit current limiting reduces output current to a safe level during fault conditions. Thermal shutdown disables the output when die temperature exceeds the threshold.

Pin Description: MCP1826S-3302E/DB Pin Definition and Functions
Pin Name Type Function
1 VIN Power Input supply (2.3-6V)
2 GND Ground Ground (connected to tab)
3 VOUT Output Regulated 3.3V output
Tab GND Ground Thermal pad / ground
Application Scenarios: In which products and applications is MCP1826S-3302E/DB used
  • Automotive ECU 3.3V power rails
  • Post-regulation after DC-DC converters
  • Notebook and palmtop computer power
  • Networking card and interface power supplies
  • Portable computing and instrumentation
Alternative Models: What chips are recommended as replacements for MCP1826S-3302E/DB
Manufacturer Part Number Package Notes
Microchip MCP1826S-5002E/DB SOT-223-3 5.0V output version
TI TLV1117LV33DCYR SOT-223-4 3.3V, 1A LDO
Diodes Inc AP2114H-3.3TRG1 SOT-223-3 3.3V, 1A, low dropout
onsemi NCP1117ST33T3G SOT-223-3 3.3V, 1A LDO

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1