Opens in a new tab

TNY280PN

TinySwitch-III offline switcher, 700V MOSFET, 20W, ON/OFF control, DIP-8

10385

Effective Inventory

Image for reference only

Manufacturer Part:

TNY280PN

Package:

DIP-8 (9.60 x 7.87 x 5.33 mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TNY280PN from Power Integrations is a TinySwitch-III series off-line flyback switcher integrating a 700V power MOSFET, oscillator, and control circuitry. Using simple ON/OFF control without loop compensation, it delivers up to 20W (enclosed adapter, 230VAC) or 14W (universal input). The DIP-8 through-hole package enables easy heat sinking to the PCB. Features include selectable current limit, frequency jittering for reduced EMI, and auto-restart protection.

Key Specifications

Type Off-Line Flyback Switcher
Topology Flyback (ON/OFF control)
Internal MOSFET 700V
Output Power (Enclosed, 230V) 20W
Output Power (Enclosed, 85-265V) 14W
Output Power (Open Frame, 230V) 36.5W
Switching Frequency 132 kHz (with jitter)
Input Voltage Range 85 – 265 VAC
Package DIP-8 (Through-Hole)
Operating Temp -40 to 150 C (Tj)

Features

  • Integrated 700V power MOSFET reduces BOM count
  • Simple ON/OFF control, no loop compensation needed
  • Selectable current limit via BP/M capacitor value
  • Frequency jittering reduces EMI filter cost
  • No-load consumption < 150 mW at 265VAC
  • Auto-restart limits output to < 3% during faults
  • Built-in thermal shutdown with automatic recovery
  • Self-biased: no bias winding required

Applications

  • Cell phone and PDA chargers
  • Digital camera and portable audio adapters
  • PC standby and auxiliary power supplies
  • Home appliance power supplies
  • Industrial and metering power supplies
Product Introduction: TNY280PN Product Introduction

The TNY280PN from Power Integrations is a TinySwitch-III series energy-efficient off-line switcher integrating a 700V power MOSFET, oscillator, high-voltage switched current source, current limit, and thermal shutdown into a single DIP-8 package. Using a simple ON/OFF control scheme that eliminates the need for loop compensation, it provides constant efficiency down to very light loads. The device supports up to 20W in enclosed adapter applications at 230VAC and 14W at universal input. Selectable current limit via the BYPASS/MULTI-FUNCTION pin capacitor extends power capability for peak loads.

Working Principle: TNY280PN Working Principle

The TNY280PN operates using ON/OFF control rather than traditional PWM. At the start of each 132 kHz switching cycle, the EN/UV pin is sampled. If the pin is high (output below regulation), the internal MOSFET is turned on and remains on until the current ramps to the current limit. If the pin is low, the cycle is skipped. This naturally regulates output voltage without error amplifier compensation. A state machine adjusts the current limit based on the pattern of enabled/skipped cycles: full current limit at heavy loads, reduced at lighter loads. Frequency jittering (±4 kHz) spreads EMI energy to simplify filter design. The internal thermal shutdown activates at approximately 142C.

Pin Description: TNY280PN Pin Definition and Functions
Pin Name Type Function
1 BP/M Power Bypass/multi-function (decoupling cap)
2 EN/UV Input Enable/under-voltage sense
3 NC – No connect
4-7 DRAIN Power Internal MOSFET drain (4 pins)
8 SOURCE Power Internal MOSFET source / ground
Application Scenarios: In which products and applications is TNY280PN used
  • Charger/adapter: Cell phone, PDA, and portable device wall adapters
  • Standby power: PC standby and auxiliary ATX power supplies
  • Consumer: DVD, set-top box, and appliance power supplies
  • Industrial: Isolated low-power supplies for control and metering
Alternative Models: What chips are recommended as replacements for TNY280PN
Manufacturer Part Number Package Notes
PI TNY279PN DIP-8 17W enclosed/230V, lower power
PI TNY287PN DIP-8 TinySwitch-4, higher power
PI LNK626PG DIP-8 LinkSwitch-XT2, non-isolated buck
MPS MP3910GJ-A SOP-8 Offline flyback controller

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1