Opens in a new tab

SN65HVD1050

EMC-optimized CAN transceiver, 1Mbps, ISO 11898-2, -27V-40V fault prot, SOIC-8

3681

Effective Inventory

Image for reference only

Manufacturer Part:

SN65HVD1050

Package:

SOIC-8 (4.90 x 6.00 x 1.58 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN65HVD1050 from Texas Instruments is an EMC-optimized high-speed CAN transceiver meeting ISO 11898-2 specifications. Supporting data rates up to 1 Mbps with bus fault protection from -27V to 40V, it features a silent (listen-only) mode, dominant time-out function, and glitch-free power-up/down behavior. Housed in an 8-pin SOIC package rated for -40 to 125 C.

Key Specifications

Type CAN Transceiver (High-Speed)
Standard ISO 11898-2
Data Rate Up to 1 Mbps
Supply Voltage 4.5V – 5.5V
Bus Fault Protection -27V to 40V
Common-Mode Range -12V to 12V
ESD Protection ISO 7637 transient (-200V to 200V)
Mode High-Speed / Silent (Listen-Only)
Package SOIC-8
Operating Temp -40 to 125 C

Features

  • EMC-optimized design with very low electromagnetic emissions
  • High electromagnetic immunity (EMI)
  • Meets or exceeds ISO 11898-2 specifications
  • Bus fault protection from -27V to 40V
  • Dominant time-out prevents bus lockup
  • Silent mode: listen-only with driver disabled
  • Glitch-free power-up and power-down transitions
  • High input impedance with low VCC for hot-plug

Applications

  • Industrial automation: DeviceNet, CANopen networks
  • Automotive CAN bus (SAE J2284, J1939)
  • Marine and agricultural: NMEA 2000, ISO 11783
  • Building automation with CAN backbone
  • Medical equipment CAN networks
Product Introduction: SN65HVD1050 Product Introduction

The SN65HVD1050 from Texas Instruments is an EMC-optimized high-speed CAN transceiver designed for robust operation in harsh environments. It meets or exceeds ISO 11898-2 specifications with data rates up to 1 Mbps. The device features bus fault protection from -27V to 40V, withstands ISO 7637 voltage transients from -200V to 200V, and includes overtemperature shutdown. A dominant time-out function prevents network communication lockup caused by hardware or software failures. The silent (listen-only) mode disables the driver while keeping the receiver active for diagnostic monitoring.

Working Principle: SN65HVD1050 Working Principle

The SN65HVD1050 converts TTL/CMOS logic levels to differential CAN bus signals. The transmitter drives CANH and CANL with complementary signals for the dominant state (logic 0), while the recessive state (logic 1) leaves both lines biased to VCC/2 via internal resistors. The EMC-optimized output stage controls slew rate and symmetry to minimize electromagnetic emissions while maintaining signal integrity. The dominant time-out circuit monitors TXD: if no rising edge is detected within a timeout period, the driver is disabled to prevent a stuck-dominant fault from blocking the bus. The S pin selects between high-speed mode (S=GND) and silent mode (S=VCC), where the driver is disabled but the receiver remains functional.

Pin Description: SN65HVD1050 Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data from CAN controller
2 GND Ground Ground
3 VCC Power Supply voltage (4.5-5.5V)
4 RXD Output Receive data to CAN controller
5 VREF Output Reference voltage (VCC/2)
6 CANL I/O CAN bus low-side line
7 CANH I/O CAN bus high-side line
8 S Input Mode select: GND=High-speed, VCC=Silent
Application Scenarios: In which products and applications is SN65HVD1050 used
  • Industrial CAN networks: DeviceNet and CANopen fieldbus systems
  • Automotive: SAE J2284 high-speed CAN for vehicle networks
  • Marine: NMEA 2000 standard data bus for marine electronics
  • Agricultural: ISO 11783 ISOBUS for tractor-implement communication
  • Building automation: CAN-based HVAC and lighting control
Alternative Models: What chips are recommended as replacements for SN65HVD1050
Manufacturer Part Number Package Notes
TI SN65HVD230DR SOIC-8 3.3V CAN transceiver
NXP TJA1050T SOIC-8 Direct replacement candidate
Microchip MCP2561-E/SN SOIC-8 CAN FD, 5Mbps, pin-compatible
NXP TJA1042T SOIC-8 CAN FD, silent mode, improved

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1