Opens in a new tab

MAX487ESA+T

RS-485/RS-422 transceiver, 250kbps, 1/4 unit load (128 nodes), SOIC-8, -40-85C

12182

Effective Inventory

Image for reference only

Manufacturer Part:

MAX487ESA+T

Package:

SOIC-8 Narrow (3.90 x 4.90 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX487ESA+T from Analog Devices (formerly Maxim) is a low-power, slew-rate-limited RS-485/RS-422 transceiver with 1 driver and 1 receiver. Operating from a single 5V supply, its 1/4 unit-load receiver input impedance allows up to 128 transceivers on one bus. The slew-rate-limited driver minimizes EMI and reflections for error-free 250 kbps communication. The ESA+T denotes the SOIC-8 industrial-temperature tape-and-reel version.

Key Specifications

Type RS-485/RS-422 Transceiver
Drivers / Receivers 1 / 1
Duplex Half
Data Rate 250 kbps (slew-rate limited)
Supply Voltage 4.75V – 5.25V (5V nominal)
Quiescent Current 120 uA (typical)
Shutdown Current 0.1 uA
Unit Load 1/4 (up to 128 nodes)
ESD Protection ±15 kV HBM
Package SOIC-8 Narrow
Operating Temp -40 to 85 C

Features

  • 1/4 unit load allows 128 transceivers on a single bus
  • Slew-rate-limited driver minimizes EMI and reflections
  • Ultra-low 120 uA quiescent supply current
  • 0.1 uA shutdown current for battery-powered applications
  • ±15 kV ESD protection on bus pins
  • Short-circuit current limited driver with thermal shutdown
  • Open-circuit fail-safe receiver output (logic high)

Applications

  • Industrial control LANs: Multi-drop RS-485 networks
  • Level translators: RS-485 to TTL/CMOS conversion
  • EMI-sensitive applications: Slew-rate limited for reduced emissions
  • Building automation: HVAC and security system networks
  • Low-power RS-422/RS-485 transceivers
Product Introduction: MAX487ESA+T Product Introduction

The MAX487ESA+T from Analog Devices (formerly Maxim Integrated) is a low-power, slew-rate-limited RS-485/RS-422 transceiver containing one driver and one receiver for half-duplex communication. Its 1/4 unit-load receiver input impedance (48 kOhm) allows up to 128 transceivers to share a single bus, quadrupling the node count of standard RS-485 transceivers. The reduced slew-rate driver minimizes EMI and reflections caused by improperly terminated cables, enabling error-free data transmission up to 250 kbps. With 120 uA quiescent current and 0.1 uA shutdown current, it is optimized for battery-powered and low-power applications.

Working Principle: MAX487ESA+T Working Principle

The MAX487ESA+T converts between TTL/CMOS logic levels and RS-485/RS-422 differential signal levels. The driver uses a current-limiting output stage that drives the A and B bus lines with complementary signals: a logic low on DI drives A high and B low (differential output), while a logic high or tri-state leaves both outputs high impedance. The slew-rate limiting is achieved by controlling the output transition time to approximately 250 ns, which reduces high-frequency spectral content that causes EMI and cable reflections. The receiver has a 70 mV hysteresis for noise immunity and a fail-safe circuit that guarantees a logic-high output when the inputs are open-circuited.

Pin Description: MAX487ESA+T Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Ground Ground
6 A I/O Non-inverting bus I/O
7 B I/O Inverting bus I/O
8 VCC Power Supply voltage (4.75-5.25V)
Application Scenarios: In which products and applications is MAX487ESA+T used
  • Industrial LANs: Multi-drop RS-485 networks with up to 128 nodes per bus
  • Building automation: BACnet MS/TP and Modbus RTU slave devices
  • EMI-sensitive systems: Slew-rate limiting for cables > 1000 ft
  • Battery-powered instruments: 0.1 uA shutdown current for long battery life
  • Security systems: RS-485 networked cameras and access controllers
Alternative Models: What chips are recommended as replacements for MAX487ESA+T
Manufacturer Part Number Package Notes
TI SN65HVD75DR SOIC-8 3.3V/5V RS-485, 500kbps, 1/8 UL
MaxLinear SP3485EN-L/TR SOIC-8 3.3V RS-485, 10Mbps, 1/4 UL
ADI MAX3082ESA+T SOIC-8 115kbps, 1/8 UL, 256 nodes
TI THVD1500DR SOIC-8 500kbps, 1/8 UL, 3.3-5V

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1