Opens in a new tab

MAX3082ESA+T

RS-485/RS-422 half-duplex transceiver, 115kbps, 1/8 UL (256 nodes), fail-safe, SOIC-8

11380

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3082ESA+T

Package:

SOIC-8 Narrow (3.90 x 4.90 x 1.37 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX3082ESA+T from Analog Devices (formerly Maxim) is a fail-safe, slew-rate-limited RS-485/RS-422 half-duplex transceiver with 1 driver and 1 receiver. Supporting 115 kbps data rate with reduced EMI, its 1/8 unit-load input impedance allows up to 256 transceivers on the bus. Fail-safe circuitry guarantees a logic-high receiver output when inputs are open or shorted. The ESA+T denotes the SOIC-8 industrial tape-and-reel version.

Key Specifications

Type RS-485/RS-422 Transceiver
Drivers / Receivers 1 / 1
Duplex Half
Data Rate 115 kbps (slew-rate limited)
Supply Voltage 4.75V – 5.25V (5V nominal)
Quiescent Current 375 uA (typical)
Unit Load 1/8 (up to 256 nodes)
Fail-Safe Open and short-circuit (logic high)
Receiver Hysteresis 100 mV
Package SOIC-8 Narrow
Operating Temp -40 to 85 C

Features

  • 1/8 unit load allows 256 transceivers on a single bus
  • Fail-safe receiver: logic-high output for open/shorted inputs
  • Slew-rate-limited driver for reduced EMI and reflections
  • 115 kbps error-free data transmission
  • 375 uA supply current (typical)
  • Short-circuit current-limited driver with thermal shutdown
  • Half-duplex operation with driver and receiver enables

Applications

  • Industrial control LANs with many nodes
  • RS-485 multi-drop networks requiring high node count
  • Building automation: BACnet and Modbus systems
  • Level translators for RS-422/RS-485 communication
  • EMI-sensitive applications needing reduced slew rate
Product Introduction: MAX3082ESA+T Product Introduction

The MAX3082ESA+T from Analog Devices (formerly Maxim Integrated) is a fail-safe, slew-rate-limited RS-485/RS-422 half-duplex transceiver with one driver and one receiver. Its 1/8 unit-load receiver input impedance allows up to 256 transceivers on a single bus, doubling the node count compared to 1/4 unit-load devices. The fail-safe circuitry guarantees a logic-high receiver output when the inputs are open or shorted, ensuring defined bus states in multi-drop networks. The slew-rate-limited driver minimizes EMI and reduces reflections from improperly terminated cables, enabling error-free data transmission up to 115 kbps.

Working Principle: MAX3082ESA+T Working Principle

The MAX3082ESA+T converts between TTL/CMOS logic levels and RS-485/RS-422 differential signal levels in half-duplex mode. The driver output stage is slew-rate limited to control the transition time, reducing high-frequency spectral content that causes EMI and reflections on long cables. The fail-safe receiver incorporates an internal bias network that pulls the differential inputs to a state that produces a logic-high output when the bus is open or shorted. The 1/8 unit-load is achieved with 96 kOhm receiver input impedance (vs. 12 kOhm standard), allowing 256 transceivers on the bus while maintaining the standard 120 Ohm termination. Driver and receiver enables (DE and RE) control bus access for half-duplex operation.

Pin Description: MAX3082ESA+T Pin Definition and Functions
Pin Name Type Function
1 RO Output Receiver output
2 RE Input Receiver enable (active low)
3 DE Input Driver enable (active high)
4 DI Input Driver data input
5 GND Ground Ground
6 A I/O Non-inverting bus I/O
7 B I/O Inverting bus I/O
8 VCC Power Supply voltage (4.75-5.25V)
Application Scenarios: In which products and applications is MAX3082ESA+T used
  • Multi-drop RS-485: Up to 256 nodes on a single bus for large-scale networks
  • Industrial LAN: Factory automation with Modbus RTU and BACnet MS/TP
  • Building automation: HVAC and security networks with fail-safe idle state
  • Level translation: TTL/CMOS to RS-485 for long-distance communication
  • EMI-sensitive: Slew-rate limited for reduced emissions in crowded cabinets
Alternative Models: What chips are recommended as replacements for MAX3082ESA+T
Manufacturer Part Number Package Notes
TI SN65HVD75DR SOIC-8 RS-485, 3.3-5V, 500kbps, 1/8 UL
ADI MAX487ESA+T SOIC-8 250kbps, 1/4 UL, 128 nodes
MaxLinear SP3485EN-L/TR SOIC-8 3.3V, 10Mbps, 1/4 UL
TI THVD1500DR SOIC-8 500kbps, 3.3-5V, 1/8 UL

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1