Opens in a new tab

MAX813LESA+T

Microprocessor supervisor, 4.65V reset, active-high, watchdog, manual reset, SOIC-8

10975

Effective Inventory

Image for reference only

Manufacturer Part:

MAX813LESA+T

Package:

SOIC-8 Narrow (3.90 x 4.90 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX813LESA+T from Analog Devices (formerly Maxim) is a low-cost microprocessor supervisory circuit providing reset, watchdog, and power-fail monitoring. With a 4.65V reset threshold and active-high RESET output, it includes a 1.6-second watchdog timer, 200 ms reset timeout, manual reset input, and a 1.25V threshold detector for power-fail warning. The ESA+T denotes the SOIC-8 industrial tape-and-reel version.

Key Specifications

Type Microprocessor Supervisor
Reset Threshold 4.65V (nominal)
Reset Output Active-High, Push-Pull
Reset Timeout 200 ms (typ)
Watchdog Timeout 1.6 seconds (typ)
PFI Threshold 1.25V (power-fail input)
Supply Voltage 1.2V – 5.5V
Supply Current 150 uA (typ)
Manual Reset Yes (debounced, active low)
Package SOIC-8 Narrow
Operating Temp -40 to 85 C

Features

  • 4.65V precision reset threshold for 5V systems
  • Active-high push-pull RESET output (no pull-up needed)
  • 1.6-second watchdog timer with independent WDO output
  • Debounced manual reset input (MR, active low)
  • 1.25V threshold detector for power-fail warning (PFI/PFO)
  • Reset valid down to VCC = 1V
  • 200 ms reset pulse width
  • Low 150 uA supply current

Applications

  • 5V microprocessor system reset and supervision
  • Power-fail warning for battery backup systems
  • Watchdog monitoring for critical embedded controllers
  • Industrial controller supervision and fault detection
  • Portable instrument power management
Product Introduction: MAX813LESA+T Product Introduction

The MAX813LESA+T from Analog Devices (formerly Maxim Integrated) is a low-cost microprocessor supervisory circuit that integrates reset generation, watchdog monitoring, and power-fail detection in a single SOIC-8 package. It provides a 4.65V precision reset threshold with an active-high push-pull RESET output, eliminating the need for an external pull-up resistor. The independent watchdog output (WDO) goes low if the watchdog input (WDI) is not toggled within 1.6 seconds. A 1.25V threshold detector with PFI input and PFO output monitors an unregulated supply for early power-fail warning. The debounced manual reset input (MR) allows push-button reset.

Working Principle: MAX813LESA+T Working Principle

The MAX813LESA+T monitors VCC through an internal resistive divider and bandgap reference. When VCC drops below 4.65V, the RESET output is asserted high. After VCC rises above the threshold, RESET remains active for 200 ms (reset timeout) to allow the microprocessor and power supply to stabilize. The watchdog timer is a monostable multivibrator triggered by transitions on WDI; if no transition occurs within 1.6 seconds, WDO goes low. The PFI comparator compares the voltage at the PFI pin against the internal 1.25V reference; when PFI drops below 1.25V, PFO goes low, providing early warning of power failure. The MR input is debounced and ORed with the internal reset generator.

Pin Description: MAX813LESA+T Pin Definition and Functions
Pin Name Type Function
1 MR Input Manual reset input (active low, debounced)
2 VCC Power Supply voltage (1.2-5.5V)
3 GND Ground Ground
4 PFI Input Power-fail input (1.25V threshold)
5 PFO Output Power-fail output (active low)
6 WDI Input Watchdog input
7 RESET Output Reset output (active high, push-pull)
8 WDO Output Watchdog output (active low)
Application Scenarios: In which products and applications is MAX813LESA+T used
  • 5V MCU supervision: Power-on reset and brownout detection for 5V microcontrollers
  • Watchdog: Hardware fault detection with 1.6s timeout for critical controllers
  • Power-fail warning: Early detection for battery backup and graceful shutdown
  • Manual reset: Debounced push-button interface for operator-initiated reset
  • Industrial PLC: Comprehensive power and software supervision in one chip
Alternative Models: What chips are recommended as replacements for MAX813LESA+T
Manufacturer Part Number Package Notes
ADI MAX707ESA+T SOIC-8 Active-low RESET, same function
TI TPS3823-33DBVR SOT-23-5 Watchdog, 3.08V threshold, smaller pkg
TI TPS3839K33DBVR SOT-23-3 Voltage monitor only, 2.93V, nano-power
Microchip TC1232COA SOIC-8 Watchdog supervisor, pin-compatible

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1