Opens in a new tab

CAT24C256WI-GT3

256Kb I2C EEPROM, 32Kx8, 1MHz, 64-byte page, ECC, SOIC-8, 1M cycles

5006

Effective Inventory

Image for reference only

Manufacturer Part:

CAT24C256WI-GT3

Package:

SOIC-8 (4.90 x 3.90 x 1.27 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CAT24C256WI-GT3 from onsemi is a 256-Kb (32K x 8) I2C CMOS serial EEPROM with 64-byte page write buffer. Supporting Standard (100 kHz), Fast (400 kHz), and Fast-Plus (1 MHz) I2C modes, it features on-chip ECC for high reliability, hardware write protection, and Schmitt trigger inputs for noise immunity. The WI-GT3 denotes the SOIC-8 package in tape-and-reel.

Key Specifications

Type Serial I2C EEPROM
Memory Size 256 Kb (32K x 8)
Organization 512 pages x 64 bytes
Interface I2C (Standard/Fast/Fast-Plus)
Clock Frequency Up to 1 MHz (Fast-Plus)
Page Write Buffer 64 bytes
Write Cycle Time 5 ms (max)
Endurance 1,000,000 program/erase cycles
Data Retention 100 years
Supply Voltage 1.8V – 5.5V
Write Protection Hardware (WP pin, entire memory)
On-Chip ECC Yes (Error Correction Code)
Address Pins 3 (A0-A2, up to 8 devices on bus)
Package SOIC-8
Operating Temp -40 to 85 C

Features

  • 256 Kb (32K x 8) with 64-byte page write buffer
  • Supports Standard (100 kHz), Fast (400 kHz), and Fast-Plus (1 MHz) I2C
  • On-chip ECC for high-reliability data storage
  • 1,000,000 program/erase cycle endurance
  • 100-year data retention
  • Hardware write protection via WP pin (entire memory)
  • Schmitt triggers and noise suppression on SCL/SDA inputs
  • Up to 8 devices on the same I2C bus via A0-A2 address pins

Applications

  • Industrial control parameter storage
  • Consumer device configuration memory
  • Automotive system calibration data
  • Communication equipment settings
  • Computer peripheral identification and setup data
Product Introduction: CAT24C256WI-GT3 Product Introduction

The CAT24C256WI-GT3 from onsemi is a 256-Kb serial I2C EEPROM organized as 32,768 x 8 bits with a 64-byte page write buffer. It supports the full range of I2C modes from Standard (100 kHz) to Fast-Plus (1 MHz) for flexible system integration. On-chip ECC (Error Correction Code) provides single-bit error correction for enhanced data reliability, making it suitable for applications where data integrity is critical. The device features 1,000,000 program/erase cycle endurance and 100-year data retention. Three address pins (A0-A2) allow up to eight CAT24C256 devices on the same I2C bus, providing up to 2 Mb of EEPROM storage.

Working Principle: CAT24C256WI-GT3 Working Principle

The CAT24C256WI-GT3 communicates via the I2C protocol with device address 0xA0/0xA1 (write/read). The 15-bit address space (32K bytes) is accessed through two address bytes following the device address byte. The 64-byte page write buffer allows writing up to 64 bytes in a single operation; the write cycle completes in 5 ms maximum. Random and sequential read operations are supported for flexible data retrieval. The on-chip ECC engine generates and stores a Hamming code for each byte, enabling single-bit error detection and correction during read operations. The WP (Write Protect) pin, when driven high, prevents all write operations to the entire memory array. Schmitt trigger inputs on SCL and SDA provide noise immunity in electrically harsh environments.

Pin Description: CAT24C256WI-GT3 Pin Definition and Functions
Pin Name Type Function
1 A0 Input Address bit 0 (device select)
2 A1 Input Address bit 1 (device select)
3 A2 Input Address bit 2 (device select)
4 GND Ground Ground
5 SDA I/O Serial data (open-drain, bidirectional)
6 SCL Input Serial clock
7 WP Input Write protect (HIGH = protect all)
8 VCC Power Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is CAT24C256WI-GT3 used
  • Industrial control: Calibration and configuration storage with ECC protection
  • Consumer devices: Settings and user preference storage with 1 MHz fast access
  • Automotive: Parameter storage with 1M cycle endurance and 100-year retention
  • Communication: MAC address and serial number storage with noise-immune inputs
  • Multi-device systems: 8 devices on one I2C bus for up to 256KB storage
Alternative Models: What chips are recommended as replacements for CAT24C256WI-GT3
Manufacturer Part Number Package Notes
Microchip AT24C256C-SSHL-T SOIC-8 256Kb I2C, 1MHz, ESD protection
ST M24256-BRMN6TP SOIC-8 256Kb I2C, automotive qualified
Rohm BR24G256FJ-3AGTE2 SOIC-8 256Kb I2C, 1.7-5.5V
onsemi CAT24C256YI-GT3 TSSOP-8 Same function, TSSOP package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1