Opens in a new tab

MIC5319-3.3YD5

500mA LDO, 3.3V fixed, 200mV dropout, 70dB PSRR, 30uVrms noise, TSOT-23-5

4950

Effective Inventory

Image for reference only

Manufacturer Part:

MIC5319-3.3YD5

Package:

TSOT-23-5 (2.80 x 2.70 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MIC5319-3.3YD5 from Microchip Technology (formerly Micrel) is a 500mA ultra-low dropout LDO regulator with a fixed 3.3V output. Featuring 200 mV dropout at 500mA, 70 dB PSRR at 1 kHz, and 30 uVrms output noise, it is designed for noise-sensitive RF and portable applications. The YD5 suffix denotes the thin SOT-23-5 (TSOT-23-5) package.

Key Specifications

Type 500mA Ultra-Low Dropout LDO
Output Voltage 3.3V (fixed)
Output Current 500 mA
Input Voltage 2.5V – 5.5V
Dropout Voltage 200 mV (typical at 500mA)
PSRR 70 dB @ 1 kHz
Output Noise 30 uVrms (10 Hz – 100 kHz, with BYP cap)
Quiescent Current 90 uA (total)
Shutdown Current < 1 uA
Accuracy 1% initial, 2% over temperature
Stability 2.2 uF ceramic output capacitor
Package TSOT-23-5
Operating Temp -40 to 125 C

Features

  • Ultra-low 200 mV dropout at 500mA
  • High 70 dB PSRR at 1 kHz for RF supply noise rejection
  • Very low 30 uVrms output noise with BYP capacitor
  • 90 uA total quiescent current for battery efficiency
  • 1% initial output voltage accuracy
  • Stable with 2.2 uF ceramic output capacitor (uCap design)
  • Logic-controlled enable with zero-off-mode current
  • BYP pin for noise reduction capacitor connection

Applications

  • RF power supply for Wi-Fi, Bluetooth, and GPS modules
  • Smartphone and tablet peripheral power rails
  • Battery-powered noise-sensitive instruments
  • Post-regulation for switching supplies
  • Portable medical device analog supply
Product Introduction: MIC5319-3.3YD5 Product Introduction

The MIC5319-3.3YD5 from Microchip Technology (formerly Micrel) is a 500mA ultra-low dropout LDO regulator with a fixed 3.3V output. It achieves 200 mV typical dropout at full 500mA load, 70 dB PSRR at 1 kHz, and only 30 uVrms output noise with an external bypass capacitor, making it ideal for noise-sensitive RF and analog applications. The uCap design ensures stability with a small 2.2 uF ceramic output capacitor, minimizing board space and BOM cost. With 90 uA total quiescent current and < 1 uA shutdown current, it is optimized for battery-powered systems. The 1% initial accuracy ensures tight voltage regulation for digital and analog loads.

Working Principle: MIC5319-3.3YD5 Working Principle

The MIC5319-3.3YD5 uses a PNP pass transistor in a common-emitter configuration, which naturally provides low dropout voltage (200 mV at 500mA) because the pass element requires only a small VCE(sat) headroom. The error amplifier compares a divided version of the output to an internal bandgap reference, driving the PNP base to maintain regulation. The BYP pin connects to the internal bandgap reference through a high-impedance node; an external 0.1 uF capacitor on BYP filters reference noise, reducing output noise to 30 uVrms. The high PSRR (70 dB at 1 kHz) is achieved through the loop gain at low frequencies and the noise-filtered reference. The enable (EN) pin controls the bias circuitry; when disabled, all internal bias is shut off, drawing less than 1 uA from the input supply.

Pin Description: MIC5319-3.3YD5 Pin Definition and Functions
Pin Name Type Function
1 IN Power Unregulated input supply (2.5-5.5V)
2 GND Ground Ground
3 EN Input Enable (HIGH = on, LOW = shutdown)
4 BYP I/O Noise bypass (connect 0.1uF cap to GND)
5 OUT Power Regulated 3.3V output
Application Scenarios: In which products and applications is MIC5319-3.3YD5 used
  • RF module power: 70 dB PSRR and 30 uVrms noise for Wi-Fi/BT/GPS supply
  • Smartphone peripherals: Low dropout from Li-ion (3.7V) to 3.3V rail
  • Post-regulation: Clean analog supply from switching converter
  • Battery instruments: 90 uA Iq and < 1 uA shutdown for long battery life
  • Portable medical: Low noise analog supply for sensor signal conditioning
Alternative Models: What chips are recommended as replacements for MIC5319-3.3YD5
Manufacturer Part Number Package Notes
Microchip MIC5319-1.8YD5 TSOT-23-5 Fixed 1.8V version, same specs
TI TLV70033DDCR SOT-23-5 200mA LDO, 3.3V, 70dB PSRR
ADI ADP122AUJZ-3.3-R7 TSOT-23-5 500mA, 3.3V, low noise
Microchip MIC5219-3.3YM5 SOT-23-5 500mA, 3.3V, earlier generation

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1