Opens in a new tab

ATMEGA1284P-AU

8-bit AVR MCU, 20MHz, 128KB Flash, 16KB SRAM, 4KB EEPROM, dual USART, TQFP-44

3791

Effective Inventory

Image for reference only

Manufacturer Part:

ATMEGA1284P-AU

Package:

TQFP-44 (10.0 x 10.0 x 1.20 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ATMEGA1284P-AU from Microchip Technology is an 8-bit AVR RISC microcontroller with 128KB Flash, 16KB SRAM, and 4KB EEPROM. Running at 20 MHz with picoPower technology, it features dual USARTs, 3 SPI, JTAG debug, 8-channel 10-bit ADC, and 32 I/O pins in a 44-pin TQFP (10x10mm) package.

Key Specifications

Core AVR Enhanced RISC (8-bit)
Max Clock 20 MHz
Flash 128 KB
SRAM 16 KB
EEPROM 4 KB
ADC 10-bit, 8 channels, differential with PGA
Timers 4 (2x 8-bit, 2x 16-bit)
USARTs 2 (with hardware SPI support)
SPI 3 (including USART in SPI mode)
I2C/TWI 1
PWM 6 channels
Comparators 1 (with multiplexed inputs)
I/O Pins 32
Supply Voltage 1.8V – 5.5V
picoPower Yes (ultra-low power in active and sleep)
Package TQFP-44 (10 x 10 mm)
Operating Temp -40 to 85 C

Features

  • 128KB Flash with 16KB SRAM (8x Arduino Uno SRAM) and 4KB EEPROM
  • picoPower technology for ultra-low power consumption
  • Dual independent USARTs for simultaneous serial communication
  • 8-channel 10-bit ADC with optional differential input and programmable gain
  • JTAG interface for on-chip debugging and boundary scan
  • 6 software-selectable power saving modes including Power-Down at 100 nA
  • 32 general-purpose I/O lines with internal pull-up resistors
  • 32 general-purpose working registers for efficient C code execution

Applications

  • 3D printer controllers (Reprap, Melzi)
  • IoT sensor nodes with dual serial interfaces
  • Home automation with 16KB SRAM for protocol stacks
  • Battery-powered data loggers with picoPower
  • Industrial control with JTAG debug capability
Product Introduction: ATMEGA1284P-AU Product Introduction

The ATMEGA1284P-AU from Microchip Technology is a high-performance, low-power 8-bit AVR RISC microcontroller combining 128KB ISP Flash with read-while-write capability, 16KB SRAM (the largest in the ATmega product line for 8-bit designs), and 4KB EEPROM. Operating at up to 20 MHz, it achieves near 1 MIPS per MHz throughput. The picoPower technology minimizes power consumption in both active and sleep modes, with Power-Down mode consuming as little as 100 nA. Dual independent USARTs enable simultaneous communication with two serial devices. The 8-channel 10-bit ADC supports optional differential input with programmable gain for direct sensor interfacing.

Working Principle: ATMEGA1284P-AU Working Principle

The ATMEGA1284P-AU uses the AVR enhanced RISC architecture with 131 instructions, most executing in a single clock cycle. The 32 general-purpose working registers are directly connected to the ALU, allowing two registers to be accessed in one instruction and enabling efficient C compiler code generation. The 16KB SRAM is particularly significant for applications requiring large data buffers such as network protocol stacks (TCP/IP), display frame buffers, or 3D printer motion planning. The Harvard architecture separates program memory (Flash) from data memory (SRAM), with a 16-bit program counter addressing 128KB Flash and 16-bit data pointers accessing the full 16KB SRAM. The dual USARTs are independent with separate baud rate generators, enabling concurrent communication at different speeds. The ADC uses a successive approximation architecture with 10-bit resolution and auto-triggering capability from timer compare matches for precise sampling intervals.

Pin Description: ATMEGA1284P-AU Pin Definition and Functions
Pin Name Type Function
VCC 2 Power Supply (1.8-5.5V)
GND 3 Ground Ground
AVCC 1 Power ADC supply
AREF 1 Reference ADC reference voltage
PA0-PA7 8 I/O Port A – ADC channels 0-7, JTAG
PB0-PB7 8 I/O Port B – SPI, USART0, timer I/O
PC0-PC7 8 I/O Port C – TWI, JTAG (TCK/TMS/TDI/TDO)
PD0-PD7 8 I/O Port D – USART0/1, INT0-3, timer I/O
XTAL1/XTAL2 2 I/O Oscillator pins
RESET 1 Input Reset (active low)
Application Scenarios: In which products and applications is ATMEGA1284P-AU used
  • 3D printers: 16KB SRAM for motion planning, dual UART for host and LCD
  • IoT nodes: picoPower sleep modes with dual USART for WiFi + GPS modules
  • Home automation: TCP/IP stack in 16KB SRAM with TWI sensor bus
  • Data loggers: 4KB EEPROM for calibration + 128KB Flash for firmware
  • Industrial control: JTAG debug with differential ADC for sensor measurement
Alternative Models: What chips are recommended as replacements for ATMEGA1284P-AU
Manufacturer Part Number Package Notes
Microchip ATMEGA1284P-PU PDIP-40 40-pin DIP, same die, prototyping
Microchip ATMEGA644P-AU TQFP-44 64KB Flash, 4KB SRAM, lower cost
Microchip ATMEGA2560-16AU TQFP-100 256KB Flash, 8KB SRAM, more I/O
ST STM32F103C8T6 LQFP-48 ARM M3, 72 MHz, 20KB SRAM, 64KB Flash

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1