Opens in a new tab

LM3940IMP-3.3/NOPB

1A LDO Regulator for 5V-to-3.3V Conversion, 310mV Dropout, SOT-223-4

4514

Effective Inventory

Image for reference only

Manufacturer Part:

LM3940IMP-3.3/NOPB

Package:

SOT-223-4 (DCY), 6.5mm x 3.5mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LM3940IMP-3.3/NOPB from Texas Instruments is a 1A low-dropout voltage regulator specifically designed for 5V to 3.3V conversion. With a typical dropout voltage of only 310mV at 1A, the device maintains 3.3V output regulation with input voltages as low as 4.5V. Packaged in a SOT-223-4 surface mount format, it requires only two external capacitors for operation and includes built-in thermal overload and short-circuit protection.

Key Specifications

Output Voltage 3.3V (fixed)
Output Current 1A (guaranteed)
Input Voltage Range 4.5V to 5.5V (up to 7.5V abs max)
Dropout Voltage 310mV typical @ 1A
Output Accuracy ±2.5%
Quiescent Current 110uA typical
PSRR 32dB @ 100kHz
Output Noise 150uVrms
Operating Temperature -40°C to +125°C

Features

  • Specifically designed for 5V to 3.3V conversion
  • True LDO: maintains regulation down to 4.5V input
  • Guaranteed 1A output current
  • Requires only one 33uF output capacitor
  • Built-in thermal overload protection
  • Short-circuit current limit protection

Applications

  • 5V to 3.3V logic level conversion
  • Laptop and desktop computers
  • Embedded systems with dual-voltage logic
  • USB-powered 3.3V devices
  • Industrial control systems
Product Introduction: LM3940IMP-3.3/NOPB Product Introduction

The LM3940IMP-3.3/NOPB from Texas Instruments is a 1A low-dropout regulator specifically designed to provide 3.3V from a 5V supply. With a typical dropout voltage of only 310mV at full 1A load, it maintains output regulation with input voltages as low as 4.5V. The SOT-223-4 surface mount package provides excellent power dissipation when soldered to a copper plane on the PCB. Output voltage accuracy is specified at ±2.5% over temperature. The device requires only a 33uF output capacitor for stability and includes comprehensive protection against thermal overload and output short circuits.

Working Principle: LM3940IMP-3.3/NOPB Working Principle

The LM3940 uses a PNP pass transistor in a low-dropout configuration. Unlike traditional NPN-based regulators that require the input voltage to be at least 2V above the output, the PNP pass element allows the regulator to operate with only 310mV of headroom at 1A. The internal bandgap reference provides a stable 1.23V reference voltage, which is compared against a divided-down version of the output voltage by the error amplifier. The error amplifier drives the PNP pass transistor to maintain the output at 3.3V. Thermal shutdown activates at approximately 165°C junction temperature, and short-circuit current limit protects against overload conditions.

Pin Description: LM3940IMP-3.3/NOPB Pin Definition and Functions
Pin Name Function
1 OUT Regulated 3.3V output
2 GND Ground (2 tabs internally connected)
3 IN Unregulated input (4.5V to 5.5V)
4 Tab GND (thermal pad, electrically ground)
Application Scenarios: In which products and applications is LM3940IMP-3.3/NOPB used
  • 5V to 3.3V logic voltage conversion in dual-voltage systems
  • Laptop and desktop computer motherboard 3.3V rail generation
  • USB-powered devices requiring stable 3.3V from 5V bus
  • Embedded systems with mixed 5V/3.3V logic families
  • Industrial control equipment power management
Alternative Models: What chips are recommended as replacements for LM3940IMP-3.3/NOPB
Model Notes
LM1117-3.3 800mA alternative, slightly higher dropout
LD1117S33 ST equivalent 800mA LDO
AMS1117-3.3 1A alternative, popular low-cost option
TLV1117-33 TI improved version, 800mA, better accuracy

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1