Opens in a new tab

MAX1681ESA+T

125mA charge-pump inverter, 2-5.5V, 125/500kHz, SOIC-8, no inductor

7522

Effective Inventory

Image for reference only

Manufacturer Part:

MAX1681ESA+T

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The MAX1681ESA+T from Analog Devices (formerly Maxim) is a 125mA, charge-pump voltage inverter in an 8-pin SOIC package. Operating from 2.0V to 5.5V input, it generates a negative output voltage with only two external capacitors, requiring no inductors. Switching at 125kHz or 500kHz, it achieves up to 98% conversion efficiency.

Key Specifications

Topology Charge-Pump Voltage Inverter
Input Voltage 2.0V to 5.5V
Output Current 125 mA (max)
Switching Frequency 125 kHz / 500 kHz (selectable)
Conversion Efficiency Up to 98%
Output Resistance 6 Ohm (typ @ 500kHz)
Quiescent Current 500 uA (typ @ 500kHz)
Shutdown Current 1 uA
Operating Temperature -40 to +85 C
Package SOIC-8

Features

  • Inverts input voltage without inductors
  • Only 2 external capacitors required
  • 125mA output current capability
  • Pin-selectable 125kHz or 500kHz switching
  • Up to 98% conversion efficiency
  • 6 Ohm typical output resistance at 500kHz
  • Shutdown mode with 1uA current
  • +/-1% output voltage accuracy with low ESR caps
  • Drop-in replacement for ICL7660/S7660

Applications

  • Negative supply generation for op-amps
  • LCD contrast control
  • RS-232 negative rail generation
  • Instrumentation dual-supply from single rail
Product Introduction: MAX1681ESA+T Product Introduction

The MAX1681ESA+T from Analog Devices is a 125mA charge-pump voltage inverter that converts a positive input voltage (2.0-5.5V) to a corresponding negative output using only two external capacitors. The ESA suffix denotes SOIC-8 package, +T indicates tape and reel. Pin-selectable switching frequency (125kHz or 500kHz) allows trade-off between output ripple and capacitor size. With 6 Ohm typical output resistance at 500kHz and up to 98% efficiency, it provides a compact inductor-free negative supply solution for op-amp biasing, LCD contrast control, and RS-232 negative rail generation.

Working Principle: MAX1681ESA+T Working Principle

The MAX1681 operates through three subsystems: (1) Charge-Pump Inverter: A switched-capacitor circuit uses two phases. During Phase 1, the flying capacitor (C1) charges from VIN through internal switches. During Phase 2, C1 is connected with its positive terminal to GND and negative terminal to the output, transferring charge to the output capacitor (C2) and producing -VIN at the output. (2) Frequency Selection: The FC pin selects between 125kHz (FC=GND) for lower switching noise and 500kHz (FC=VIN or floating) for smaller capacitors and lower output resistance. Higher frequency reduces the output impedance from 20 Ohm to 6 Ohm. (3) Shutdown: Driving SHDN low disables the oscillator and reduces supply current to 1uA.

Pin Description: MAX1681ESA+T Pin Definition and Functions
Pin Name Type Description
1 FC Input Frequency control (GND=125kHz, V+=500kHz)
2 C1+ Power Flying capacitor positive terminal
3 GND Power Ground
4 C1- Power Flying capacitor negative terminal
5 OUT Output Negative output voltage
6 LV Input Low-voltage mode (connect to OUT for Vin<3V)
7 SHDN Input Shutdown (active low)
8 V+ Power Positive supply input (2.0-5.5V)
Application Scenarios: In which products and applications is MAX1681ESA+T used
  • Generating -5V from +5V for dual-supply op-amp circuits without inductors
  • LCD panel negative contrast voltage with 500kHz mode for compact capacitors
  • RS-232 negative rail from single +3.3V supply with 125mA drive
  • Portable instrument dual-rail supply using only 2 external capacitors
Alternative Models: What chips are recommended as replacements for MAX1681ESA+T
Model Manufacturer Iout Frequency Notes
ICL7660SIBA Renesas 40mA 10kHz Lower current, lower cost
LM27762DSGR TI 250mA 2MHz Regulated LDO output
TPS60400DBVR TI 60mA 50kHz Smaller package
MAX828ESA+T ADI 50mA 12kHz SOT-23 package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1