Opens in a new tab

XTR111AIDGQR

Precision V-to-I converter, 4-20mA, 0.002% NL, 1uV/C, 7-44V, HVSSOP-10

3800

Effective Inventory

Image for reference only

Manufacturer Part:

XTR111AIDGQR

Package:

HVSSOP-10 (DGQ) (3.0 x 4.9 x 0.9 mm, PowerPAD)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The XTR111AIDGQR from Texas Instruments is a precision voltage-to-current converter/transmitter designed for 0-20mA or 4-20mA analog current loops. With 0.002% nonlinearity, 0.015% accuracy, 1uV/C offset drift, and an integrated 3-15V subregulator, it provides the highest precision for industrial 3-wire current loop systems in a 10-pin HVSSOP package.

Key Specifications

Output Range 0-20mA, 4-20mA, 5-25mA, or voltage
Nonlinearity 0.002%
Accuracy 0.015%
Offset Drift 1 uV/C
Supply Voltage 7V to 44V
Subregulator Output 3V to 15V (adjustable)
Output Current Up to 32mA (source)
Error Flag Yes (open-drain)
Output Disable Yes (OD pin)
Operating Temperature -40 to +125 C
Package HVSSOP-10 (DGQ)

Features

  • 0.002% nonlinearity precision
  • 0.015% accuracy
  • 1uV/C ultra-low offset drift
  • Configurable 0-20mA, 4-20mA, or 5-25mA output
  • Resistor-set I/O ratio (single external resistor)
  • 7V to 44V wide supply range
  • Adjustable 3-15V subregulator output
  • Output error flag (EF)
  • Output disable (OD)
  • External P-MOSFET for high output compliance

Applications

  • 4-20mA current loop transmitters
  • PLC analog output modules
  • 3-wire sensor systems
  • Current-mode sensor excitation
Product Introduction: XTR111AIDGQR Product Introduction

The XTR111AIDGQR from Texas Instruments is a precision voltage-to-current converter/transmitter designed for standard 0-20mA or 4-20mA analog current loop signals, sourcing up to 32mA. The suffix AIDGQR decodes as: A=HVSSOP-10 (DGQ) package, I=industrial temperature range (-40 to +125C), DGQ=HVSSOP-10 with PowerPAD, R=tape and reel. The ratio between input voltage and output current is set by a single external resistor RSET. An external P-MOSFET provides high output resistance and wide compliance voltage range. The integrated 3-15V adjustable subregulator powers additional circuitry such as sensor signal conditioning.

Working Principle: XTR111AIDGQR Working Principle

The XTR111 operates through four subsystems: (1) Voltage-to-Current Conversion: The input voltage (VIN) applied across the SET pin resistor (RSET) generates a current ISET = VIN/RSET. This current is internally amplified and mirrored to the output, producing IOUT = 10 x VIN/RSET. For a 4-20mA output with 0-5V input: RSET = 10 x 5V/20mA = 2.5kOhm. (2) External P-MOSFET: An external P-MOSFET (not included) provides the actual current sourcing capability and high output resistance. The XTR111 drives the MOSFET gate to regulate the loop current. This allows the output compliance voltage to extend from VVSP-2V to well below ground. (3) Subregulator: An adjustable 3-15V linear regulator output (REGS pin) provides power for external circuitry. The output voltage is set by an external resistor divider. (4) Error Flag: The EF pin (open-drain) pulls low when the output cannot maintain regulation (e.g., open loop, compliance exceeded), providing real-time fault detection.

Pin Description: XTR111AIDGQR Pin Definition and Functions
Pin Name Type Description
1 VSP Power Supply voltage (7-44V)
2 VREG Output Subregulator output (3-15V adjustable)
3 SET Input Current set resistor connection
4 VIN Input Input voltage (0-5V typical)
5 GND Power Ground
6 OD Input Output disable (active high)
7 EF Output Error flag (open-drain, low = fault)
8 IS Output Current output sense (to P-MOSFET source)
9 G Output P-MOSFET gate drive
10 REGF Output Regulator feedback (for voltage output mode)
Application Scenarios: In which products and applications is XTR111AIDGQR used
  • Industrial 4-20mA PLC analog output module with 0.002% linearity and EF fault detection
  • 3-wire pressure transmitter with integrated subregulator powering sensor conditioning
  • Current-mode sensor excitation with OD pin for fast output enable/disable cycling
  • Precision voltage-controlled current source with 1uV/C drift for laboratory instrumentation
Alternative Models: What chips are recommended as replacements for XTR111AIDGQR
Model Manufacturer Range Accuracy Notes
XTR111AIDRCR TI 0-20mA 0.015% VSON-10 package
XTR110AP TI 4-20mA 0.005% DIP-16, integrated resistors
XTR300AIPW TI +/-24mA 0.1% Bidirectional current/voltage
AD5421ACPZ ADI 4-20mA 0.05% 16-bit DAC input

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1