Opens in a new tab

EN5339QI

3A PowerSoC buck converter, integrated inductor, 3.5MHz, 4x6mm QFN-24

2655

Effective Inventory

Image for reference only

Manufacturer Part:

EN5339QI

Package:

QFN-24 (4.0 x 6.0 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EN5339QI from Intel (formerly Altera/Enpirion) is a 3A PowerSoC synchronous buck DC-DC converter with integrated inductor in a 4x6mm 24-pin QFN package. Operating from 2.4V to 5.5V input with 3.5MHz switching frequency, it delivers an adjustable output from 0.6V to VIN in a compact footprint suitable for high-current point-of-load regulation.

Key Specifications

Output Current 3 A (max)
Input Voltage 2.4V to 5.5V
Output Voltage 0.6V to VIN-Vdropout (adjustable)
Switching Frequency 3.5 MHz (fixed)
Efficiency Up to 93%
Operating Temperature -40 to +125 C (junction)
Package QFN-24 (4 x 6 x 1.1 mm)

Features

  • 3A output current with integrated inductor
  • 4x6mm QFN-24 package with integrated inductor
  • 3.5MHz fixed switching frequency
  • Up to 93% efficiency
  • Adjustable output voltage via resistor divider
  • Power OK output
  • 100% duty cycle low-dropout mode
  • UVLO, overcurrent, short circuit, and thermal protection
  • Enable pin with soft-start

Applications

  • FPGA and ASIC core power
  • Point-of-load DC-DC conversion
  • Computing and networking equipment
  • Portable instrument power
Product Introduction: EN5339QI Product Introduction

The EN5339QI from Intel Enpirion is a 3A PowerSoC synchronous buck DC-DC converter integrating the inductor, MOSFET switches, and compensation in a 4x6x1.1mm 24-pin QFN package. The QI suffix denotes the QFN package. Operating from 2.4V to 5.5V input with a 3.5MHz fixed switching frequency, it provides up to 3A output current with adjustable output voltage from 0.6V to VIN. The integrated inductor eliminates the need for external magnetics, simplifying PCB layout and ensuring predictable EMI performance. With up to 93% efficiency and a complete protection suite, the EN5339QI is ideal for high-current FPGA and ASIC point-of-load power conversion.

Working Principle: EN5339QI Working Principle

The EN5339QI operates through four subsystems: (1) Integrated Power Stage: A synchronous buck converter with integrated high-side and low-side MOSFETs and a proprietary thin-film inductor inside the QFN package. The 3.5MHz switching frequency enables the use of a small integrated inductor while maintaining high efficiency. (2) Voltage-Mode PWM Control: A voltage-mode controller with internal compensation drives the power stage. The output voltage is set by an external resistor divider connected to the VFB pin with a 0.6V reference. (3) Power OK and Soft-Start: The POK output provides a power-good indicator. Soft-start limits inrush current during power-up by ramping the reference voltage gradually. (4) Protection: Cycle-by-cycle over-current protection, under-voltage lockout, output over-voltage protection, and thermal shutdown protect the device and load from fault conditions.

Pin Description: EN5339QI Pin Definition and Functions
Pin Name Type Description
1-4 PGND Power Power ground connections
5, 6 PVIN Power Input power supply (2.4-5.5V)
7-10 VOUT Power Output voltage connections
11 VFB Analog Feedback pin (0.6V reference)
12 AGND Power Analog ground
13 AVIN Power Analog supply input
14 POK Output Power OK open-drain output
15 ENABLE Input Enable (high=on, low=off)
16-24 NC/PGND — No connect / Power ground
Application Scenarios: In which products and applications is EN5339QI used
  • FPGA core power delivery at 3A from 5V or 3.3V input with integrated inductor simplifying design
  • ASIC point-of-load regulation with 0.6V reference for low-voltage cores
  • High-current POL conversion in networking equipment with Power OK monitoring
  • Compact DC-DC solution replacing discrete inductor-based buck converters
Alternative Models: What chips are recommended as replacements for EN5339QI
Model Manufacturer Iout Frequency Notes
FS1406-0600-AL TDK 6A 3MHz Higher current replacement
TPS82140SILR TI 3A 2MHz MicroSiP module
LMZ31710RVQ TI 10A 1MHz Much higher current
EN5366QI Intel 6A 4MHz Same family, higher current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1