Opens in a new tab

SN3257QPWRQ1

Quad 2:1 mux, AEC-Q100, 1.5Ohm Ron, 300MHz, powered-off prot, TSSOP-16

10948

Effective Inventory

Image for reference only

Manufacturer Part:

SN3257QPWRQ1

Package:

TSSOP-16 (5.0 x 4.4 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The SN3257QPWRQ1 from Texas Instruments is an AEC-Q100 qualified quad-channel 2:1 multiplexer/demultiplexer with powered-off protection and fail-safe logic in a TSSOP-16 package. With 1.8V to 5.5V supply range, 1.5Ohm on-resistance, and 300MHz bandwidth, it is designed for automotive signal routing applications.

Key Specifications

Configuration 4-channel 2:1 Mux/Demux (SPDT)
Supply Voltage 1.8V to 5.5V
On-Resistance (Ron) 1.5 Ohm (typ @ 5V)
Bandwidth 300 MHz (-3dB)
Charge Injection -5 pC (typ)
Off-Isolation -64 dB @ 10MHz
Powered-Off Protection Yes (I/O high-impedance when VDD=0)
Fail-Safe Logic Yes (select pins tolerant above VDD)
Operating Temperature -40 to +125 C
Qualification AEC-Q100 Grade 1
Package TSSOP-16

Features

  • AEC-Q100 Grade 1 qualified for automotive
  • Quad SPDT (4-channel 2:1) multiplexer
  • 1.5Ohm low on-resistance at 5V
  • 300MHz wide bandwidth
  • Powered-off protection (I/O hi-Z when VDD=0)
  • Fail-safe logic pins (tolerate voltages above VDD)
  • 1.8V to 5.5V supply range
  • Bidirectional signal path
  • Break-before-make switching
  • -5pC low charge injection

Applications

  • Automotive signal routing and sensor multiplexing
  • Battery management system cell monitoring
  • Audio and video signal switching
  • Industrial control signal routing
Product Introduction: SN3257QPWRQ1 Product Introduction

The SN3257QPWRQ1 from Texas Instruments is an AEC-Q100 Grade 1 qualified quad-channel 2:1 (SPDT) multiplexer/demultiplexer in a TSSOP-16 package. The Q1 suffix denotes automotive qualification, PWR indicates TSSOP package, and R denotes tape and reel. With 1.5Ohm typical on-resistance at 5V, 300MHz bandwidth, and powered-off protection, it is specifically designed for automotive signal routing. The fail-safe logic feature allows the select pins to be driven by external logic even when VDD is not present, preventing back-powering of the device. The powered-off protection ensures all signal paths become high-impedance when the supply is removed, protecting downstream circuitry.

Working Principle: SN3257QPWRQ1 Working Principle

The SN3257-Q1 operates through four subsystems: (1) Analog Switch Array: Four independent SPDT (single-pole double-throw) analog switches route one of two inputs to a common output per channel. The switches are bidirectional, supporting both multiplexing (2 inputs to 1 output) and demultiplexing (1 input to 2 outputs). (2) Digital Control: Two select pins (S0, S1) control all four channels simultaneously. When S=0, the normally-closed (NC) path is selected; when S=1, the normally-open (NO) path is selected. An enable pin (EN) can force all switches open. (3) Powered-Off Protection: When VDD = 0V, an internal circuit detects the absence of power and forces all I/O pins to a high-impedance state, preventing current flow from signal sources through the device. (4) Fail-Safe Logic: The select and enable inputs have special circuitry that tolerates voltages above VDD, preventing parasitic conduction when control signals are present before power is applied.

Pin Description: SN3257QPWRQ1 Pin Definition and Functions
Pin Name Type Description
1 1IN1 Analog Channel 1, input 1 (NC path)
2 1IN2 Analog Channel 1, input 2 (NO path)
3 2IN1 Analog Channel 2, input 1 (NC path)
4 2IN2 Analog Channel 2, input 2 (NO path)
5 EN Input Enable (active low)
6, 7 S0, S1 Input Select inputs (fail-safe)
8 GND Power Ground
9-12 D1-D4 Analog Channel outputs
13 4IN2 Analog Channel 4, input 2 (NO path)
14 4IN1 Analog Channel 4, input 1 (NC path)
15 3IN2 Analog Channel 3, input 2 (NO path)
16 VDD Power Supply voltage (1.8-5.5V)
Application Scenarios: In which products and applications is SN3257QPWRQ1 used
  • Automotive BMS cell voltage multiplexing with powered-off protection preventing battery drain
  • Sensor signal routing in automotive ECUs with AEC-Q100 Grade 1 reliability
  • Audio signal source selection with 300MHz bandwidth and -5pC low charge injection
  • Redundant signal path switching with fail-safe logic tolerating hot-swap scenarios
Alternative Models: What chips are recommended as replacements for SN3257QPWRQ1
Model Manufacturer Channels Ron Notes
TS5A3359QRTERQ1 TI 5:1 10Ohm 5-channel mux
NC7SB3157P6X onsemi 1 1Ohm Single SPDT
ADG732BCPZ ADI 32:1 4Ohm High channel count
SN3257PW TI 4 1.5Ohm Non-auto grade

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1