Opens in a new tab

TPD2EUSB30DRTR

2-ch USB 3.0 ESD protection, 0.7pF, 8kV, 5A surge, DRT 1×0.8mm

10206

Effective Inventory

Image for reference only

Manufacturer Part:

TPD2EUSB30DRTR

Package:

DRT / SOT-9X3 (1.0 x 0.8 x 0.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TPD2EUSB30DRTR from Texas Instruments is a 2-channel ESD protection diode array optimized for USB 3.0 SuperSpeed interfaces in a 3-pin DRT (1.0 x 0.8mm) package. With 0.7pF typical capacitance, 8kV IEC ESD rating, and 5A surge capability, it provides transparent protection for 5Gbps differential data lines.

Key Specifications

Channels 2 (differential pair)
Interface USB 3.0 SuperSpeed (5 Gbps)
Capacitance 0.7 pF (typical per channel)
Working Voltage (VRWM) 5.5 V
Breakdown Voltage (VBR) 7 V (min)
Clamping Voltage (VC) 8 V (typ)
ESD Rating (IEC 61000-4-2) +/-8 kV (contact)
Surge Rating (IEC 61000-4-5) 5 A (8/20us)
Dynamic Resistance 0.6 Ohm (typ)
Operating Temperature -40 to +85 C
Package DRT (SOT-9X3, 1.0 x 0.8 mm)

Features

  • 2-channel ESD protection for USB 3.0 SuperSpeed
  • 0.7pF ultra-low capacitance per channel
  • Supports USB 3.0 data rates up to 5Gbps
  • IEC 61000-4-2 Level 4 ESD protection (+/-8kV contact)
  • 5A IEC 61000-4-5 surge current rating
  • 0.6Ohm dynamic resistance for low clamping voltage
  • Flow-through pin mapping for easy PCB layout
  • 1.0 x 0.8mm ultra-small DRT package
  • Unidirectional protection

Applications

  • USB 3.0 port ESD protection
  • Laptop and desktop USB connectors
  • Set-top box and media player USB ports
  • Portable device USB interfaces
Product Introduction: TPD2EUSB30DRTR Product Introduction

The TPD2EUSB30DRTR from Texas Instruments is a 2-channel ESD protection diode array specifically designed for USB 3.0 SuperSpeed (5Gbps) differential data lines. The DRTR suffix denotes the DRT package with tape and reel packaging. With only 0.7pF typical channel capacitance, it introduces minimal signal degradation on 5Gbps USB 3.0 data lines. The device provides IEC 61000-4-2 Level 4 ESD protection (+/-8kV contact) and 5A IEC 61000-4-5 surge current rating. The 0.6Ohm dynamic resistance results in an 8V typical clamping voltage, well within USB 3.0 receiver tolerance. The flow-through pin mapping (D+ in, D+ out, GND) simplifies PCB layout by routing the differential pair directly through the device.

Working Principle: TPD2EUSB30DRTR Working Principle

The TPD2EUSB30 operates through three protection mechanisms: (1) ESD Clamping: When an electrostatic discharge event occurs on the D+ or D- line, the internal TVS diode conducts within picoseconds, diverting the ESD current to ground. The device is rated to IEC 61000-4-2 Level 4 (+/-8kV contact discharge). (2) Surge Protection: For longer duration surge events (IEC 61000-4-5, 8/20us waveform), the device can handle up to 5A peak pulse current. The 0.6Ohm dynamic resistance results in a low 8V typical clamping voltage at the rated surge current. (3) Signal Transparency: The 0.7pF typical channel capacitance is low enough to be transparent to USB 3.0 SuperSpeed signals at 5Gbps. The insertion loss at USB 3.0 frequencies is minimal, ensuring signal integrity is maintained. The unidirectional construction provides protection for positive-going transients on the data lines referenced to ground.

Pin Description: TPD2EUSB30DRTR Pin Definition and Functions
Pin Name Type Description
1 D1+ ESD ESD clamp for D+ signal line
2 D1- ESD ESD clamp for D- signal line
3 GND Power Ground connection
Application Scenarios: In which products and applications is TPD2EUSB30DRTR used
  • USB 3.0 SuperSpeed port ESD protection with 0.7pF capacitance preserving 5Gbps signal integrity
  • Laptop USB connector protection against +/-8kV IEC contact discharge with flow-through layout
  • Set-top box USB 3.0 port 5A surge protection against inductive switching transients
  • Portable device USB interface in 1.0×0.8mm DRT package for space-constrained designs
Alternative Models: What chips are recommended as replacements for TPD2EUSB30DRTR
Model Manufacturer Channels CAP Notes
TPD2EUSB30A TI 2 0.7pF 4.5V low breakdown
TPD4EUSB30 TI 4 0.8pF 4-channel version
PESD5V0S2UT315 Nexperia 2 0.5pF Lower capacitance
TUSB214RWBR TI — — USB redriver + ESD

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1