Opens in a new tab

TL082CDR

Dual JFET-input op-amp, 3MHz GBW, 13V/us, 30pA Ibias, SOIC-8

40675

Effective Inventory

Image for reference only

Manufacturer Part:

TL082CDR

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The TL082CDR from Texas Instruments is a dual JFET-input operational amplifier in an 8-pin SOIC package. With 3MHz gain-bandwidth product, 13V/us slew rate, 30pA input bias current, and wide +/-2.25V to +/-20V supply range, it is a general-purpose JFET op-amp for audio, industrial, and instrumentation applications.

Key Specifications

Channels 2 (dual)
Architecture JFET-Input
Gain-Bandwidth Product 3 MHz
Slew Rate 13 V/us
Input Offset Voltage 3 mV (typ), 6 mV (max)
Input Bias Current 30 pA (typ)
Input Offset Current 5 pA (typ)
CMRR 86 dB (typ)
Supply Voltage Range +/-2.25V to +/-20V (4.5V to 40V)
Supply Current 1.4 mA/ch (typ)
Noise Density 18 nV/sqrtHz @ 1kHz
THD 0.003% (typ)
Operating Temperature 0 to +70 C
Package SOIC-8

Features

  • Dual JFET-input operational amplifier
  • 3MHz gain-bandwidth product
  • 13V/us high slew rate
  • 30pA low input bias current
  • High input impedance (10^12 Ohm)
  • +/-2.25V to +/-20V wide supply range
  • Output short-circuit protection
  • 0.003% low total harmonic distortion
  • Pin-compatible with LM1558/LM358
  • Common-mode input includes VCC+

Applications

  • Audio preamplifiers and filters
  • High-impedance sensor interfaces
  • Active filters and integrators
  • Sample-and-hold circuits
Product Introduction: TL082CDR Product Introduction

The TL082CDR from Texas Instruments is a dual JFET-input operational amplifier in an 8-pin SOIC package. The C suffix indicates commercial temperature range (0 to +70C), D denotes SOIC-8 package, and R indicates tape and reel. Using BI-FET II technology, it combines JFET input transistors (for ultra-low 30pA input bias current and 10^12 Ohm input impedance) with bipolar output stage (for low output impedance and short-circuit protection). The 3MHz gain-bandwidth product and 13V/us slew rate make it suitable for audio and general-purpose applications. Pin-compatible with the industry-standard LM1558, it offers an upgrade path with JFET input performance. The TL082H variant extends the temperature range to -40 to +125C with improved specs.

Working Principle: TL082CDR Working Principle

The TL082CDR operates through three circuit stages per channel: (1) JFET Input Differential Pair: Two matched N-channel JFETs form the input differential pair, providing extremely low input bias current (30pA typical) and high input impedance (10^12 Ohm). The JFET input also enables the common-mode voltage range to include the positive supply rail (VCC+), allowing operation in single-supply applications where the inputs must approach the positive rail. (2) Voltage Gain Stage: A high-gain bipolar stage amplifies the differential signal from the JFET pair. Internal compensation provides unity-gain stability with a 3MHz gain-bandwidth product. (3) Output Stage: A Class AB bipolar output stage provides low output impedance and can drive loads as low as 2kOhm to +/-10V swing at +/-15V supply. Short-circuit protection limits the output current during fault conditions. The output can swing to within 1.5V of the supply rails.

Pin Description: TL082CDR Pin Definition and Functions
Pin Name Type Description
1 1OUT Output Channel 1 output
2 1IN- Input Channel 1 inverting input
3 1IN+ Input Channel 1 non-inverting input
4 VCC- Power Negative supply (or GND for single-supply)
5 2IN+ Input Channel 2 non-inverting input
6 2IN- Input Channel 2 inverting input
7 2OUT Output Channel 2 output
8 VCC+ Power Positive supply
Application Scenarios: In which products and applications is TL082CDR used
  • Audio preamplifier with 30pA low input bias current and 0.003% THD for high-fidelity signal path
  • High-impedance pH sensor interface with 10^12 Ohm input impedance and 86dB CMRR
  • Active filter stage with 3MHz GBW and 13V/us slew rate for anti-aliasing or tone control
  • Sample-and-hold circuit with JFET input preventing sample capacitor discharge during hold
Alternative Models: What chips are recommended as replacements for TL082CDR
Model Manufacturer GBW Ibias Notes
TL082HCDR TI 5.25MHz 20pA Improved version, -40 to +125C
TL072CDR TI 3MHz 30pA Lower noise version
RC4558DR TI 3MHz 40nA Bipolar input, audio standard
OPA2134PA TI 8MHz 100pA FET input, higher performance

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1