Opens in a new tab

MCP6L02T-E/SN

Dual CMOS RRIO op-amp, 1MHz GBW, 50uA/ch, 2-6V, SOIC-8

38593

Effective Inventory

Image for reference only

Manufacturer Part:

MCP6L02T-E/SN

Package:

SOIC-8 (4.9 x 3.9 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MCP6L02T-E/SN from Microchip Technology is a dual general-purpose CMOS operational amplifier with 1MHz gain-bandwidth product in an 8-pin SOIC package. With 2.0V to 6.0V supply range, 50uA per-channel quiescent current, and rail-to-rail input/output, it is optimized for low-power battery-operated applications.

Key Specifications

Channels 2 (dual)
Architecture CMOS Rail-to-Rail
Gain-Bandwidth Product 1 MHz
Slew Rate 0.6 V/us
Input Offset Voltage 1.0 mV (typ), 3.5 mV (max)
Input Bias Current 1 pA (typ)
Supply Voltage Range 2.0V to 6.0V
Quiescent Current 50 uA/ch (typ)
CMRR 80 dB (typ)
PSRR 82 dB (typ)
Operating Temperature -40 to +125 C (E suffix)
Package SOIC-8

Features

  • Dual CMOS rail-to-rail operational amplifier
  • 1MHz gain-bandwidth product
  • Rail-to-rail input and output
  • 2.0V to 6.0V single-supply operation
  • 50uA per channel quiescent current
  • 1pA ultra-low input bias current
  • 1.0mV typical input offset voltage
  • Extended temperature range: -40 to +125C
  • Unity-gain stable
  • No phase reversal in overdrive conditions

Applications

  • Battery-powered instrumentation
  • Portable medical devices
  • Sensor signal conditioning
  • Active filters and buffers
Product Introduction: MCP6L02T-E/SN Product Introduction

The MCP6L02T-E/SN from Microchip Technology is a dual general-purpose CMOS operational amplifier with rail-to-rail input and output in an 8-pin SOIC package. The suffix decodes as: T=tape and reel, E=extended industrial temperature range (-40 to +125C), SN=SOIC-8 package. With 1MHz gain-bandwidth product, 50uA per-channel quiescent current, and 2.0V to 6.0V supply range, it is optimized for low-power battery-operated applications requiring precision signal conditioning. The rail-to-rail input stage covers the entire supply range (including both ground and VDD), while the rail-to-rail output stage swings within millivolts of the supply rails under light loads. The 1pA typical input bias current makes it ideal for high-impedance sensor interfaces.

Working Principle: MCP6L02T-E/SN Working Principle

The MCP6L02 operates through three circuit stages per channel: (1) Rail-to-Rail Input Stage: A complementary input pair (both PMOS and NMOS differential pairs) covers the entire common-mode range from VSS to VDD. When the input voltage is near VSS, the PMOS pair is active. When near VDD, the NMOS pair is active. In the middle range, both pairs contribute. The crossover point is carefully managed to minimize offset voltage transitions. (2) Gain Stage: A high-gain CMOS stage provides the open-loop voltage gain. Internal compensation (a small capacitor) ensures unity-gain stability with a 1MHz gain-bandwidth product. The 0.6V/us slew rate is typical for a 50uA amplifier. (3) Rail-to-Rail Output Stage: A Class AB CMOS output stage can swing to within a few millivolts of both supply rails under light load (<1kOhm). Under heavier loads, the output swing is limited by the output transistor on-resistance. The output does not phase reverse when the input is overdriven beyond the supply rails, a common problem with older CMOS op-amps.

Pin Description: MCP6L02T-E/SN Pin Definition and Functions
Pin Name Type Description
1 VOUTA Output Channel A output
2 VINA- Input Channel A inverting input
3 VINA+ Input Channel A non-inverting input
4 VSS Power Negative supply / Ground
5 VINB+ Input Channel B non-inverting input
6 VINB- Input Channel B inverting input
7 VOUTB Output Channel B output
8 VDD Power Positive supply (2.0-6.0V)
Application Scenarios: In which products and applications is MCP6L02T-E/SN used
  • Battery-powered sensor signal conditioning with 50uA/ch quiescent current and rail-to-rail I/O
  • Portable medical device amplifier with 1pA input bias for high-impedance electrode interface
  • Single-supply active filter at 3.3V with 1MHz GBW and rail-to-rail output for maximum dynamic range
  • Industrial sensor buffer with -40 to +125C extended temperature range and no phase reversal
Alternative Models: What chips are recommended as replacements for MCP6L02T-E/SN
Model Manufacturer GBW Iq/ch Notes
MCP6002-I/SN Microchip 1MHz 100uA Similar, higher Iq
TLV2462CDR TI 6.4MHz 500uA Higher speed
LMV358IDGKR TI 1MHz 100uA Pin-compatible alternative
OPA2314AIDR TI 3MHz 150uA Higher performance

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1