Opens in a new tab

A3906SESTR-T

Low-voltage stepper/DC motor driver, 2.5-9V, 1A/ch, PWM current control, QFN-20

7715

Effective Inventory

Image for reference only

Manufacturer Part:

A3906SESTR-T

Package:

QFN-20 (4 x 4 x 0.75 mm, exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The A3906SESTR-T from Allegro MicroSystems is a low-voltage stepper and single/dual DC motor driver with internal PWM current control. It operates from 2.5V to 9V, delivers up to 1A per channel, and features synchronous rectification in a 20-pin QFN package.

Key Specifications

Motor Type Stepper / DC Brushed
Supply Voltage 2.5V to 9V
Output Current 1A per channel
RDS(ON) 0.52Ohm (typ)
Number of Outputs 2 (dual H-bridge)
Control Interface Logic inputs (IN1-IN4)
Operating Temperature -20 to 85 C
Package QFN-20 (4x4mm)

Features

  • Internal fixed off-time PWM current control
  • Synchronous rectification for reduced power dissipation
  • Overcurrent output flag for fault monitoring
  • Undervoltage lockout (UVLO)
  • Crossover-current protection
  • Brake mode for DC motors
  • Sleep function for low standby power
  • Thermal shutdown protection

Applications

  • Digital still cameras
  • Cell phone camera modules
  • USB-powered devices
  • Battery-powered motor drive
  • Portable electronics
Product Introduction: A3906SESTR-T Product Introduction

The A3906SESTR-T from Allegro MicroSystems is a low-voltage motor driver designed for pulse width modulated (PWM) control of low voltage stepper motors and single or dual DC motors. It is capable of output currents up to 1A per channel and operates from 2.5V to 9V, making it ideal for battery-powered applications. The device includes an internal fixed off-time PWM timer that sets a peak current based on the selection of a current sense resistor. An overcurrent output flag notifies the system when the motor winding current reaches the peak threshold. Synchronous rectification reduces power dissipation by conducting current through the low-RDS(ON) MOSFETs instead of body diodes during the off-time. The A3906 features crossover-current protection, undervoltage lockout, thermal shutdown, and a sleep function that reduces standby current to below 150uA. The device is available in a 20-pin 4mm x 4mm QFN package with exposed thermal pad.

Working Principle: A3906SESTR-T Working Principle

The A3906SESTR-T operates as a dual full-bridge motor driver with integrated PWM current regulation. Key subsystems include: (1) Dual H-Bridge Output Stage – two independent full-bridge outputs using N-channel MOSFETs with 0.52Ohm RDS(ON), each capable of driving 1A continuous; (2) PWM Current Control – an internal fixed off-time PWM timer and current sense comparator regulate the motor winding current; when the voltage across the sense resistor exceeds the threshold, the PWM timer turns off the drive for a fixed off-time; (3) Charge Pump – generates the gate drive voltage above VBB for the high-side N-channel MOSFETs; (4) Synchronous Rectification – during the PWM off-time, current recirculates through the low-side MOSFETs instead of body diodes, reducing power dissipation; (5) Protection Logic – monitors for undervoltage, overcurrent, and overtemperature conditions.

Pin Description: A3906SESTR-T Pin Definition and Functions
Pin Name Type Function
1 CP2 I/O Charge pump capacitor terminal 2
2 GND Ground Ground connection
3 SLEEP Input Sleep mode input (active low)
4 IN1 Input Bridge 1 control input 1
5 IN2 Input Bridge 1 control input 2
6 IN3 Input Bridge 2 control input 1
7 IN4 Input Bridge 2 control input 2
8 FL1 Output Bridge 1 current limit fault flag
9 SENSE2 Input Bridge 2 current sense resistor terminal
10 OUT2A Output Bridge 2 output A
11 OUT2B Output Bridge 2 output B
12 VBB Power Motor supply voltage
13 FL2 Output Bridge 2 current limit fault flag
14 SENSE1 Input Bridge 1 current sense resistor terminal
15 OUT1B Output Bridge 1 output B
16 OUT1A Output Bridge 1 output A
17-20 CP1/CP3/CP4/VCP I/O Charge pump and reservoir capacitor terminals
Application Scenarios: In which products and applications is A3906SESTR-T used
  • Digital still camera lens and focus motor control
  • Cell phone camera module actuator drive
  • USB-powered miniature stepper and DC motor systems
  • Battery-powered toy and consumer motor applications
  • Portable medical device precision motor control
Alternative Models: What chips are recommended as replacements for A3906SESTR-T
Manufacturer Part Number Package Notes
Allegro A3901SESTR-T QFN-20 Similar, different current rating
Texas Instruments DRV8833PWHR HTSSOP-16 Dual H-bridge, 1.5A
STMicroelectronics L293DD SOIC-20 Quad half-H, 600mA
ON Semiconductor LV8548MC-AH SSOP-10 Dual H-bridge, 0.8A
Toshiba TB67H451FNG HSOP-8 Single H-bridge, 1.5A

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1