Opens in a new tab

Home » Integrated Circuits ICs » S25FL064LABMFI010

S25FL064LABMFI010

64Mbit Quad-SPI NOR Flash, 108MHz, 2.7-3.6V, AEC-Q100, SOIC-8

10598

Effective Inventory

Image for reference only

Manufacturer Part:

S25FL064LABMFI010

Package:

SOIC-8 (5.28 x 5.28 x 1.9 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The S25FL064LABMFI010 from Infineon is a 64Mbit (8MB) SPI multi-I/O NOR Flash memory supporting single, dual, and quad SPI interfaces at up to 108MHz. It operates from 2.7V to 3.6V in an 8-pin SOIC package with AEC-Q100 qualification.

Key Specifications

Density 64Mbit (8M x 8)
Interface SPI / Dual SPI / Quad SPI / QPI
Max Clock Frequency 108MHz (SDR)
Supply Voltage 2.7V to 3.6V
Program/Erase Cycles 100,000 minimum
Data Retention 20 years minimum
Operating Temperature -40 to 85 C
Qualification AEC-Q100

Features

  • Single/Dual/Quad SPI and QPI interface support
  • 108MHz SDR clock frequency
  • 64Mb density with floating gate technology
  • Symmetric block architecture
  • Hardware reset and write protection
  • 100,000 program/erase cycle endurance
  • 20-year data retention minimum
  • AEC-Q100 qualified

Applications

  • Automotive infotainment and ADAS
  • Industrial embedded code storage
  • Consumer electronics firmware
  • Networking equipment boot storage
  • Medical device program memory
Product Introduction: S25FL064LABMFI010 Product Introduction

The S25FL064LABMFI010 from Infineon (formerly Cypress Semiconductor) is a 64Mbit (8MB) 3.0V SPI multi-I/O NOR Flash memory device. It supports single-bit SPI, dual SPI (DIO), quad SPI (QIO), and quad peripheral interface (QPI) modes, enabling flexible trade-offs between pin count and throughput. Operating at up to 108MHz in SDR mode, the device provides fast read throughput for execute-in-place (XIP) applications. The floating gate process technology delivers 100,000 program/erase cycle endurance and 20-year data retention. The S25FL-L family features a symmetric block architecture with uniform 256KB sectors, simplifying software management. Hardware reset, write protection, and a one-time programmable (OTP) area provide data security features. AEC-Q100 qualified, the device is suitable for automotive and industrial applications. It is available in an 8-pin SOIC package operating from 2.7V to 3.6V over the -40 to 85 C temperature range.

Working Principle: S25FL064LABMFI010 Working Principle

The S25FL064LABMFI010 operates as a serial peripheral interface (SPI) NOR flash memory. Key subsystems include: (1) SPI Command Interface – a command-driven protocol where the host initiates operations by sending a command byte followed by address and data bytes; (2) Multi-I/O Controller – supports single (1-bit), dual (2-bit), and quad (4-bit) data paths for progressively higher read throughput; (3) Flash Memory Array – 64Mbit of floating-gate NOR flash cells organized in a symmetric block/sector architecture; (4) Program/Erase Engine – internal state machine handles page programming and sector/block erase operations with automatic timing and status polling; (5) Protection Logic – hardware and software write protection mechanisms prevent accidental data modification; (6) OTP Area – a dedicated one-time programmable region for permanent data storage.

Pin Description: S25FL064LABMFI010 Pin Definition and Functions
Pin Name Type Function
1 CS# Input Chip select (active low)
2 SO/IO1 I/O Serial output / IO1 in multi-I/O mode
3 WP#/IO2 I/O Write protect / IO2 in Quad mode
4 VSS Power Ground
5 SI/IO0 I/O Serial input / IO0 in multi-I/O mode
6 SCK Input Serial clock
7 IO3/RESET# I/O IO3 in Quad mode / Hardware reset
8 VCC Power Power supply (2.7V to 3.6V)
Application Scenarios: In which products and applications is S25FL064LABMFI010 used
  • Automotive infotainment and ADAS code storage with XIP
  • Industrial embedded system firmware and parameter storage
  • Consumer electronics boot code and configuration storage
  • Networking equipment firmware upgrade storage
  • Medical device program and calibration data storage
Alternative Models: What chips are recommended as replacements for S25FL064LABMFI010
Manufacturer Part Number Package Notes
Macronix MX25L6433FMI-08G SOIC-8 64Mbit, 80MHz, Quad SPI
Winbond W25Q64JVSSIM SOIC-8 64Mbit, 133MHz, Quad SPI
GigaDevice GD25Q64CSIG SOIC-8 64Mbit, 120MHz, Quad SPI
Microchip SST26VF064B-104I/SM SOIC-8 64Mbit, 104MHz, SQI
Infineon S25FL064LABMFV010 SOIC-8 Same density, different temp range

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1