Opens in a new tab

LTM8045IY#PBF

SEPIC/Inverting uModule DC/DC, 2.8-18V in, +/-2.5V to +/-15V out, 700mA, BGA-40

3756

Effective Inventory

Image for reference only

Manufacturer Part:

LTM8045IY#PBF

Package:

BGA-40 (11.25 x 6.25 x 4.92 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The LTM8045IY#PBF from Analog Devices is an inverting or SEPIC uModule DC/DC converter with up to 700mA output current. It operates from 2.8V to 18V input and provides output voltages from +/-2.5V to +/-15V in a compact 40-lead BGA (11.25 x 6.25 x 4.92mm) package.

Key Specifications

Topology SEPIC or Inverting
Input Voltage Range 2.8V to 18V
Output Voltage +/-2.5V to +/-15V (adjustable)
Output Current 700mA (VIN=12V, VOUT=2.5V)
Switching Frequency 200kHz to 2MHz (selectable)
Quiescent Current 1uA (shutdown)
Output Ripple 4mV RMS (typ)
Operating Temperature -40 to 125 C

Features

  • SEPIC or inverting topology configurable by grounding appropriate rail
  • Integrated power devices, inductors, and control circuitry
  • Programmable soft-start
  • User-configurable undervoltage lockout
  • External clock synchronization
  • Only input/output capacitors and setting resistors needed

Applications

  • Battery-powered regulators
  • Local negative voltage regulators
  • Low-noise amplifier power supplies
  • Optical module bias supplies
  • Industrial and medical instrumentation
Product Introduction: LTM8045IY#PBF Product Introduction

The LTM8045IY#PBF from Analog Devices is a uModule DC/DC converter that can be configured as a SEPIC or inverting converter by simply grounding the appropriate output rail. In SEPIC configuration, the regulated output voltage can be above, below, or equal to the input voltage. The device integrates power devices, inductors, control circuitry, and passive components into a single 40-lead BGA package. Operating from 2.8V to 18V input, it delivers up to 700mA output current at +/-2.5V or 375mA at +/-15V. The switching frequency is selectable from 200kHz to 2MHz via an external resistor. Programmable soft-start and user-configurable UVLO provide additional design flexibility. Only input/output capacitors and small setting resistors are needed to complete the design.

Working Principle: LTM8045IY#PBF Working Principle

The LTM8045IY#PBF operates as a current-mode controlled SEPIC or inverting converter with integrated magnetics. Key subsystems include: (1) Current-Mode PWM Controller – regulates the output voltage by comparing the error amplifier output with the switch current; (2) Integrated Power MOSFETs – both high-side and low-side switches are integrated; (3) Integrated Inductor – a custom power inductor is encapsulated within the BGA package; (4) Feedback Network – an external resistor divider sets the output voltage; (5) Configuration Logic – grounding VOUT+ configures inverting mode, grounding VOUT- configures SEPIC mode; (6) Soft-Start – an external capacitor programs the startup ramp rate.

Pin Description: LTM8045IY#PBF Pin Definition and Functions
Pin Name Type Function
Bank 1 VOUT- Output Negative output rail
Bank 2 VOUT+ Output Positive output rail
Bank 3 VIN Power Input voltage supply (2.8V to 18V)
Bank 4 RUN Input Run control / UVLO set
A1 FB Input Feedback voltage input
B1 SS Input Soft-start capacitor connection
C1 RT Input Switching frequency set resistor
D1 SYNC Input External clock synchronization
E1 GND Ground Ground connection
Application Scenarios: In which products and applications is LTM8045IY#PBF used
  • Battery-powered regulators requiring voltage above or below input
  • Local negative voltage generation for op-amp bias supplies
  • Low-noise amplifier power with clean split-rail output
  • Optical module bias supply generation
  • Industrial and medical instrumentation power
Alternative Models: What chips are recommended as replacements for LTM8045IY#PBF
Manufacturer Part Number Package Notes
Analog Devices LTM8047IY#PBF BGA-42 Isolated uModule, 3.1-32V
Texas Instruments LMZ14203TZ TO-PMOD-7 42V 3A buck module
Monolithic Power MPM3690GQV-30 QFN-28 30V 3A, integrated inductor
Analog Devices LTM8045MPY#PBF BGA-40 Military temp grade
Cui Inc PDM1-S5-D12-S SIP-4 1W isolated DC-DC

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1