Opens in a new tab

ATA6561-GAQW-N

CAN FD transceiver, 5Mbps, standby mode, VIO pin, ISO 11898-2, AEC-Q100, SOIC-8

8452

Effective Inventory

Image for reference only

Manufacturer Part:

ATA6561-GAQW-N

Package:

SOIC-8 (4.9 x 3.9 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ATA6561-GAQW-N from Microchip is a high-speed CAN FD transceiver with standby mode and VIO pin. It supports data rates up to 5Mbps, is fully ISO 11898-2:2016 compliant, and features low EME and high EMI in an SOIC-8 package rated for -40 to 150 C.

Key Specifications

Data Rate Up to 5Mbps (CAN FD)
Supply Voltage 4.5V to 5.5V
VIO Pin 3V to 5.5V
Standby Current 12uA (typ)
Operating Modes Normal, Standby
ESD Protection High on bus pins
Operating Temperature -40 to 150 C
Qualification AEC-Q100

Features

  • CAN FD ready up to 5Mbps
  • ISO 11898-2:2016 and SAE J2284 compliant
  • VIO pin for direct MCU interface at 3V to 5V
  • Low electromagnetic emission (EME)
  • High electromagnetic immunity (EMI)
  • Remote wake-up via CAN bus
  • TXD dominant timeout protection
  • Bus pins protected against automotive transients

Applications

  • Automotive CAN bus networks
  • Industrial CAN FD communication
  • Motor vehicle ECU interconnection
  • ADAS sensor communication
  • Commercial vehicle CAN networks
Product Introduction: ATA6561-GAQW-N Product Introduction

The ATA6561-GAQW-N from Microchip is a high-speed CAN FD transceiver providing the physical layer interface between a CAN protocol controller and the differential CAN bus. Fully compliant with ISO 11898-2:2016 and SAE J2284, it supports CAN FD data rates up to 5Mbps. The VIO pin enables direct interfacing with microcontrollers operating at 3V to 5.5V logic levels without level shifters. The device features very low electromagnetic emission and high electromagnetic immunity for reliable communication in noisy automotive environments. In standby mode, current consumption drops to 12uA with remote wake-up capability via CAN bus activity. TXD dominant timeout and undervoltage detection on VCC provide additional fail-safe features. AEC-Q100 qualified, the ATA6561 is available in SOIC-8 package rated for -40 to 150 C.

Working Principle: ATA6561-GAQW-N Working Principle

The ATA6561-GAQW-N operates as a CAN physical layer transceiver with two operating modes. Key subsystems include: (1) Transmitter – converts TTL/CMOS logic levels from the CAN controller (via TXD) to differential bus signals on CANH and CANL; dominant state creates ~2V differential, recessive state both lines at ~2.5V; (2) Receiver – continuously monitors the bus differential voltage and outputs the detected state to RXD; (3) VIO Level Shifter – the VIO pin sets the logic level for TXD/RXD pins, enabling direct connection to 3V or 5V microcontrollers; (4) Mode Control – the STB pin selects between Normal mode (full transceiver operation) and Standby mode (low power with RXD wake-up); (5) Protection – TXD dominant timeout prevents bus lock-up, undervoltage detection on VCC ensures predictable behavior during supply faults.

Pin Description: ATA6561-GAQW-N Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input from CAN controller
2 GND Ground Ground connection
3 VCC Power Supply voltage (4.5V to 5.5V)
4 RXD Output Receive data output to CAN controller
5 VIO Power Logic level supply (3V to 5.5V)
6 CANL I/O CAN bus low-side line
7 CANH I/O CAN bus high-side line
8 STB Input Standby mode control (active low)
Application Scenarios: In which products and applications is ATA6561-GAQW-N used
  • Automotive CAN FD networks: ECU-to-ECU high-speed communication
  • ADAS sensor communication with 5Mbps CAN FD data rates
  • Industrial CAN FD fieldbus for automation equipment
  • Commercial vehicle CAN networks with VIO 3.3V MCU interface
  • Automotive gateway modules with low-power standby wake-up
Alternative Models: What chips are recommended as replacements for ATA6561-GAQW-N
Manufacturer Part Number Package Notes
Microchip ATA6560-GAQW-N SOIC-8 Without VIO pin
NXP TJA1463AT SOIC-8 CAN FD, 5Mbps, VIO
Texas Instruments TCAN1462VDRBRQ1 SOIC-8 CAN FD, 5Mbps, VIO
Infineon TLE9251VSJ SOIC-8 CAN FD transceiver
ON Semiconductor NCV7342MWDR2G SOIC-8 CAN FD, 5Mbps

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1