Opens in a new tab

MAX3051ESA+T

CAN transceiver, 1Mbps, +/-36V fault prot, 3 modes, slope control, SOIC-8

6671

Effective Inventory

Image for reference only

Manufacturer Part:

MAX3051ESA+T

Package:

SOIC-8 (4.9 x 3.9 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MAX3051ESA+T from Analog Devices (Maxim Integrated) is a CAN transceiver interfacing between a CAN protocol controller and the physical bus. It supports 1Mbps data rate, operates from 4.75V to 5.25V, and features slope control and shutdown mode in an 8-pin SOIC package.

Key Specifications

Data Rate Up to 1Mbps
Supply Voltage 4.75V to 5.25V
Bus Protection +/-36V fault protection
Slope Control Yes (via RS pin)
Standby Current 45uA
Operating Modes High-Speed, Slope-Control, Standby
Operating Temperature -40 to 125 C
Package SOIC-8

Features

  • ISO 11898 standard compliant
  • +/-36V fault-protected bus pins
  • Three operating modes: high-speed, slope-control, standby
  • Slope control for reduced EMI
  • Thermal shutdown protection
  • Current limiting on bus pins
  • Unpowered node does not disturb bus

Applications

  • Automotive CAN bus networks
  • Industrial CAN communication
  • Building automation
  • Medical equipment CAN interfaces
  • Telecom system CAN backplanes
Product Introduction: MAX3051ESA+T Product Introduction

The MAX3051ESA+T from Analog Devices (formerly Maxim Integrated) is a CAN transceiver that provides the physical layer interface between a CAN protocol controller and the differential CAN bus. Compliant with ISO 11898, it supports data rates up to 1Mbps with three operating modes: high-speed for maximum throughput, slope-control for reduced EMI in lower-speed applications, and standby for minimal power consumption. The bus pins are fault-protected to +/-36V, surviving common automotive fault conditions. Thermal shutdown and current limiting provide additional robustness. The device consumes only 45uA in standby mode and ensures that an unpowered node does not disturb the bus. The MAX3051ESA+T is available in an 8-pin SOIC package rated for -40 to 125 C.

Working Principle: MAX3051ESA+T Working Principle

The MAX3051ESA+T operates as a CAN physical layer transceiver with three configurable modes. Key subsystems include: (1) Transmitter – converts TTL logic on TXD to differential bus signals; dominant state drives CANH high and CANL low; (2) Receiver – monitors bus differential voltage and outputs logic level on RXD; (3) Mode Control – the RS pin selects between high-speed (RS tied low), slope-control (RS with resistor to ground), and standby (RS tied high) modes; (4) Slope Control – in slope-control mode, the output slew rate is reduced to minimize EMI and reflections on unshielded buses; (5) Protection – +/-36V fault protection on bus pins, thermal shutdown, and current limiting; (6) Power Management – standby mode reduces current to 45uA while maintaining receive capability.

Pin Description: MAX3051ESA+T Pin Definition and Functions
Pin Name Type Function
1 TXD Input Transmit data input from CAN controller
2 GND Ground Ground connection
3 VCC Power Supply voltage (4.75V to 5.25V)
4 RXD Output Receive data output to CAN controller
5 SHDN Input Shutdown control (active high)
6 CANL I/O CAN bus low-side line
7 CANH I/O CAN bus high-side line
8 RS Input Slope control / mode select
Application Scenarios: In which products and applications is MAX3051ESA+T used
  • Automotive CAN bus: ECU communication with EMI reduction
  • Industrial CAN: Process control and automation fieldbus
  • Building automation: HVAC and lighting control CAN networks
  • Medical equipment: Inter-device CAN communication
  • Telecom: CAN backplane communication in equipment racks
Alternative Models: What chips are recommended as replacements for MAX3051ESA+T
Manufacturer Part Number Package Notes
Microchip MCP2551-I/SN SOIC-8 Pin-compatible, similar specs
NXP TJA1050T SOIC-8 High-speed CAN transceiver
Texas Instruments SN65HVD230DR SOIC-8 3.3V CAN transceiver
onsemi AMIS-30663CAN SOIC-8 Automotive CAN transceiver
Infineon TLE6250G SOIC-8 Low-emission CAN transceiver

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1