Opens in a new tab

X9C103SIZT1

10kOhm digital pot, 100 taps, 3-wire interface, NV wiper storage, SOIC-8

5360

Effective Inventory

Image for reference only

Manufacturer Part:

X9C103SIZT1

Package:

SOIC-8 (4.9 x 3.9 x 1.25 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The X9C103SIZT1 from Renesas (formerly Intersil) is a digitally controlled potentiometer (XDCP) with 10kOhm end-to-end resistance, 100 taps, and 3-wire serial interface. It operates from -5V to +5V across the resistor terminals in an 8-pin SOIC package.

Key Specifications

Type Digitally Controlled Potentiometer
Resistance 10kOhm
Number of Taps 100
Resolution 101 positions
Interface 3-wire (U/D, CS, INC)
Terminal Voltage Range -5V to +5V
Supply Voltage 2.7V to 5.5V
Operating Temperature -40 to 85 C

Features

  • 10kOhm with 100 taps (101 positions)
  • 3-wire up/down serial interface
  • Non-volatile wiper setting storage
  • Wiper stored on power-down and recalled on power-up
  • +/-5V signal range across resistor terminals
  • Low wiper resistance: 40Ohm (typ)

Applications

  • Programmable gain amplifiers
  • Volume and brightness control
  • Sensor calibration and offset adjustment
  • Power supply trimming
  • Automotive adjustment circuits
Product Introduction: X9C103SIZT1 Product Introduction

The X9C103SIZT1 from Renesas (formerly Intersil) is a digitally controlled potentiometer (XDCP) with 10kOhm end-to-end resistance and 100 taps providing 101 discrete wiper positions. The device uses a simple 3-wire (U/D, CS, INC) serial interface to increment or decrement the wiper position. A key feature is the non-volatile storage of the wiper position: the setting is automatically stored when CS goes high and recalled on the next power-up, eliminating the need for external storage. The resistor terminals can handle signals from -5V to +5V, enabling use in split-rail analog circuits. With low wiper resistance of 40Ohm typical and operating from 2.7V to 5.5V logic supply, the X9C103SIZT1 is ideal for programmable gain, calibration, and adjustment circuits.

Working Principle: X9C103SIZT1 Working Principle

The X9C103SIZT1 operates as a digitally controlled resistor divider. Key subsystems include: (1) Resistor Array – a series string of 99 equal resistors totaling 10kOhm, with 100 tap points between resistors and at the ends; (2) Wiper Switch Array – CMOS analog switches connect the wiper terminal (VW) to one of the 100 tap points, selected by the stored wiper register value; (3) 3-Wire Interface – CS (chip select), INC (increment clock), and U/D (up/down direction) control the wiper movement; each INC pulse moves the wiper one position in the direction set by U/D; (4) Non-Volatile Storage – the wiper position is stored in EEPROM when CS transitions high; on power-up, the last stored position is recalled; (5) Terminal Buffers – the VH, VL, and VW terminals can handle signals from -5V to +5V independent of the logic supply.

Pin Description: X9C103SIZT1 Pin Definition and Functions
Pin Name Type Function
1 VH Analog Resistor high terminal
2 VW Analog Wiper terminal (output)
3 VL Analog Resistor low terminal
4 VSS Power Logic ground
5 U/D Input Up/Down direction control
6 CS Input Chip select (active low)
7 INC Input Increment clock input
8 VCC Power Logic supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is X9C103SIZT1 used
  • Programmable gain amplifiers with digitally set feedback ratio
  • Volume, brightness, and contrast control in consumer electronics
  • Sensor calibration and offset adjustment in measurement systems
  • Power supply voltage trimming with non-volatile setting
  • Automotive circuit adjustment with EEPROM recall
Alternative Models: What chips are recommended as replacements for X9C103SIZT1
Manufacturer Part Number Package Notes
Renesas X9C102SIZT1 SOIC-8 1kOhm version
Renesas X9C104SIZT1 SOIC-8 100kOhm version
Microchip MCP4131-103E/SN SOIC-8 10kOhm, SPI, 129 taps
Analog Devices AD5171BCP10-RL7 DFN-8 10kOhm, I2C, 64 positions
Maxim Integrated DS1803-010+ SOIC-14 10kOhm, I2C, dual channel

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1