Opens in a new tab

TPS54318RTER

3A sync buck DC-DC, 2.95-6V in, 0.8-4.5V out, 2MHz, integrated FETs, WQFN-16

4886

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54318RTER

Package:

WQFN-16 (3.0 x 3.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS54318RTER from Texas Instruments is a 2.95V to 6V input, 3A synchronous step-down DC-DC converter with integrated MOSFETs. It features 200kHz to 2MHz switching frequency, adjustable soft start, and power-good output in a 3mm x 3mm WQFN-16 package.

Key Specifications

Topology Synchronous Buck
Input Voltage 2.95V to 6V
Output Voltage 0.8V to 4.5V (adjustable)
Output Current 3A
Switching Frequency 200kHz to 2MHz (adjustable)
MOSFET RDS(on) 30mOhm (typ, both HS and LS)
Voltage Reference 0.8V +/-1%
Quiescent Current 350uA (typ)
Operating Temperature -40 to 150 C (junction)

Features

  • Two integrated 30mOhm MOSFETs for high efficiency
  • Adjustable switching frequency: 200kHz to 2MHz
  • +/-1% voltage reference accuracy over temperature
  • External clock synchronization
  • Adjustable soft start/sequencing
  • Undervoltage and overvoltage power-good output
  • Cycle-by-cycle current limit with thermal foldback
  • Safe start-up into prebiased output

Applications

  • Point-of-load regulation for DSP, FPGA, ASIC
  • Broadband and telecom infrastructure
  • Low-voltage, high-density power systems
  • Server and storage power supplies
  • Portable and battery-powered equipment
Product Introduction: TPS54318RTER Product Introduction

The TPS54318RTER from Texas Instruments is a full-featured 6V, 3A synchronous step-down current-mode converter with two integrated 30mOhm MOSFETs. The device enables small designs by integrating the power MOSFETs, implementing current-mode control to reduce external component count, and supporting up to 2MHz switching frequency to minimize inductor size. The 0.8V +/-1% voltage reference provides accurate regulation over the full -40 to 150 C junction temperature range. A 350uA typical operating quiescent current maximizes light-load efficiency, while the EN pin reduces shutdown current to 2uA. Features include adjustable soft start for controlled output ramp, power-good output with undervoltage/overvoltage thresholds, external clock synchronization, and safe start-up into prebiased outputs. The device is packaged in a thermally enhanced 3mm x 3mm WQFN-16 package.

Working Principle: TPS54318RTER Working Principle

The TPS54318RTER operates as a current-mode synchronous buck converter. Key subsystems include: (1) Current-Mode PWM Controller – compares the output of the voltage error amplifier with the high-side switch current to set the duty cycle; this provides inherent cycle-by-cycle current limiting and simplified loop compensation; (2) Integrated MOSFETs – a 30mOhm high-side NMOS switch and 30mOhm low-side NMOS synchronous rectifier are integrated on-die; (3) Bootstrap Circuit – an external bootstrap capacitor between BOOT and PH provides gate drive voltage above VIN for the high-side NMOS; (4) Error Amplifier – the COMP pin allows external Type-II or Type-III compensation networks; (5) Soft Start – an external capacitor on the SS/CLK pin programs the startup ramp time; (6) Power Good – an open-drain PWRGD output asserts when VOUT is within 93%-107% of the target; (7) Protection – cycle-by-cycle current limit, thermal shutdown with frequency foldback, and undervoltage lockout.

Pin Description: TPS54318RTER Pin Definition and Functions
Pin Name Type Function
1 GND Ground Power ground
2 PH Power Phase node (switch output)
3 PH Power Phase node (switch output)
4 VIN Power Input voltage supply
5 VIN Power Input voltage supply
6 EN Input Enable / UVLO adjust
7 SS/CLK I/O Soft-start cap / external clock sync
8 COMP Output Error amplifier output (compensation)
9 VSENSE Input Feedback voltage sense
10 AGND Ground Analog ground
11 PWRGD Output Power good (open-drain)
12 RT Input Switching frequency set resistor
13 BOOT Power Bootstrap capacitor connection
14-16 GND/PH Mixed Ground and phase connections
Application Scenarios: In which products and applications is TPS54318RTER used
  • Point-of-load regulation: 5V to 1.2V/1.8V/3.3V for DSP, FPGA, and ASIC cores
  • Broadband and telecom: POL regulators in line cards and switches
  • Server and storage: dense power supply rails with 2MHz switching
  • Portable equipment: high-efficiency 3.3V/1.8V rails from Li-Ion battery
  • Industrial control: POL regulation with wide -40 to 150 C junction range
Alternative Models: What chips are recommended as replacements for TPS54318RTER
Manufacturer Part Number Package Notes
TI TPS54328RTER WQFN-16 4.5-18V input, 3A
TI TPS54317RTER WQFN-16 Lower Iq version
Monolithic Power MPM3690GQV-30 QFN-28 3A, integrated inductor
Infineon IR3843AMTRPBF PQFN-18 3A, 4.5-14V input
Richtek RT8059GQW WQFN-16 3A, 2.7-5.5V input

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1