Opens in a new tab

GD32F105RCT6

Cortex-M3 MCU, 108MHz, 256KB Flash, 96KB SRAM, dual CAN+USB OTG, LQFP-64

11879

Effective Inventory

Image for reference only

Manufacturer Part:

GD32F105RCT6

Package:

LQFP-64 (10 x 10 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The GD32F105RCT6 from GigaDevice is a 32-bit ARM Cortex-M3 MCU from the connectivity line, operating at 108MHz with 256KB Flash, 96KB SRAM, dual CAN, USB FS OTG, and Ethernet MAC in a 64-pin LQFP package.

Key Specifications

Core ARM Cortex-M3 (32-bit)
Max Clock 108MHz
Flash Memory 256KB
SRAM 96KB
Supply Voltage 2.0V to 3.6V
GPIO Up to 51
ADC 2 x 12-bit, 16 channels total
DAC 2 x 12-bit
Connectivity 2xCAN, USB FS OTG, 3xUSART, 2xI2C, 3xSPI, 2xI2S
Operating Temperature -40 to 85 C

Features

  • ARM Cortex-M3 core at 108MHz with zero-wait-state Flash
  • 256KB Flash with 96KB SRAM
  • Dual CAN 2.0B controllers for automotive/industrial networking
  • USB 2.0 Full-Speed OTG with on-chip PHY
  • ENET MAC with DMA for Ethernet connectivity
  • Dual 12-bit ADCs with 16 total channels

Applications

  • Industrial automation and connectivity
  • Automotive gateway and body controllers
  • USB-enabled embedded systems
  • Communication equipment
  • Smart energy and metering
Product Introduction: GD32F105RCT6 Product Introduction

The GD32F105RCT6 from GigaDevice is a 32-bit general-purpose microcontroller based on the ARM Cortex-M3 RISC core, belonging to the connectivity line of the GD32 MCU family. Operating at up to 108MHz with zero-wait-state Flash access, it delivers maximum processing efficiency with 1.25 DMIPS/MHz. The device features 256KB of on-chip Flash and 96KB of SRAM, providing ample memory for connectivity applications. The connectivity line is distinguished by enhanced communication peripherals including dual CAN 2.0B controllers, USB 2.0 Full-Speed OTG with integrated PHY, and an Ethernet MAC with DMA controller. Additional peripherals include two 12-bit ADCs with 16 total channels, dual 12-bit DACs, three USARTs, two I2C interfaces, three SPI controllers, two I2S interfaces, and multiple timers. The GD32F105RCT6 is pin-compatible with the STM32F105RCT6, offering a cost-effective alternative.

Working Principle: GD32F105RCT6 Working Principle

The GD32F105RCT6 is based on the ARM Cortex-M3 core with enhanced connectivity peripherals. Key subsystems include: (1) Cortex-M3 Core – a 32-bit RISC processor with 3-stage pipeline, hardware division, single-cycle multiply, and nested vectored interrupt controller (NVIC); (2) Flash Memory Controller – zero-wait-state access at 108MHz using a prefetch buffer and accelerator; (3) Dual CAN Controllers – two independent CAN 2.0B controllers with mailboxes support standard and extended frames up to 1Mbps; (4) USB OTG FS – a USB 2.0 full-speed on-the-go controller with integrated PHY supports device, host, and OTG modes; (5) Ethernet MAC – an IEEE 802.3-compliant MAC with DMA controller for efficient packet handling; (6) DMA Controller – a multi-channel DMA offloads data transfer from the CPU for all communication peripherals; (7) Power Management – supports Sleep, Deep-Sleep, and Standby modes with wakeup sources.

Pin Description: GD32F105RCT6 Pin Definition and Functions
Pin Name Type Function
1 VBAT Power Battery backup power supply
2 PC13/RTC I/O Port C / RTC / Tamper
3-10 PD0-PD7 I/O Port D / CAN / USART
11-20 PB0-PB11 I/O Port B / I2C / SPI / ADC
21-36 PA0-PA15 I/O Port A / USART / USB / ENET
37-52 PB12-PB15 / PC0-PC12 I/O Port B-C / SPI / I2S / Timer
53-64 PD8-PD15 / NRST / BOOT Mixed Port D / Reset / Boot mode
Application Scenarios: In which products and applications is GD32F105RCT6 used
  • Industrial automation: dual CAN gateway connecting different CAN networks
  • Automotive body controllers: CAN and USB connectivity for diagnostics and firmware updates
  • USB-enabled embedded systems: OTG host/device mode for data transfer
  • Communication equipment: Ethernet-enabled protocol converters and gateways
  • Smart energy: metering applications with CAN and Ethernet connectivity
Alternative Models: What chips are recommended as replacements for GD32F105RCT6
Manufacturer Part Number Package Notes
STMicroelectronics STM32F105RCT6 LQFP-64 Pin-compatible original
GigaDevice GD32F107RCT6 LQFP-64 With Ethernet PHY
NXP LPC1756FBD80 LQFP-80 Cortex-M3, CAN, Ethernet
Microchip SAM3X8EA-AU LQFP-144 Cortex-M3, CAN, Ethernet
Texas Instruments TMS570LS0714PGE LQFP-144 Cortex-R4, safety MCU

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1