Opens in a new tab

MC33262PG

Active PFC controller, CRM boost, 12-28V, 250uA startup, OVP, PDIP-8, -40 to 105C

2942

Effective Inventory

Image for reference only

Manufacturer Part:

MC33262PG

Package:

PDIP-8 (9.27 x 6.35 x 4.57 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The MC33262PG from onsemi is an active power factor correction (PFC) controller operating in critical conduction mode (CRM). Designed for electronic ballast and off-line power converters, it features an internal startup timer, one-quadrant multiplier, zero current detector, and comprehensive protection in a PDIP-8 package.

Key Specifications

PFC Mode Critical Conduction Mode (CRM)
Control Mode Current Mode
Topology Step-Up (Boost)
Supply Voltage 12V to 28V (max 36V)
Startup Current 250uA (typ)
Operating Current 6.5mA (typ)
UVLO Start Threshold 13V (typ)
UVLO Hysteresis 6.0V
Reference Voltage 2.5V +/-2%
Drive Output Current +/-500mA
Switching Frequency Variable (CRM)
Operating Temperature -40 to +105 C

Features

  • One-quadrant multiplier for near-unity power factor
  • Zero current detector for critical conduction operation
  • Overvoltage comparator eliminates runaway output voltage
  • Internal startup timer for standalone applications
  • Trimmed 2% internal bandgap reference
  • Totem pole output with high-state clamp for MOSFET gate protection
  • UVLO with 6V hysteresis for reliable startup
  • Cycle-by-cycle current limiting
  • Low startup current (250uA) for efficient offline operation

Applications

  • Active power factor correction pre-converters
  • Electronic ballast
  • Off-line power converters
  • Switching power supplies
Product Introduction: MC33262PG Product Introduction

The MC33262PG from onsemi is an active power factor correction controller specifically designed for use as a pre-converter in electronic ballast and off-line power converter applications. Operating in critical conduction mode (CRM), also known as transition mode or boundary conduction mode, the device ensures near-unity power factor by forcing the boost inductor current to return to zero before each new switching cycle begins. The MC33262PG integrates all essential PFC control functions into an 8-pin package. Key building blocks include a one-quadrant multiplier that forces the input current waveform to follow the rectified AC line voltage, a transconductance error amplifier for output voltage regulation with a trimmed 2% bandgap reference, a zero current detector that triggers the next MOSFET on-cycle when the inductor current reaches zero, and a current sense comparator for cycle-by-cycle peak current limiting. Protection features include an overvoltage comparator that eliminates runaway output voltage when the load is suddenly removed, undervoltage lockout (UVLO) with 6V hysteresis that ensures reliable startup at 13V and shutdown at 7V, and a multiplier output clamp that limits maximum peak switch current. The totem-pole output can source or sink 500mA for direct MOSFET drive, with a high-state clamp protecting the MOSFET gate from overvoltage. The low 250uA startup current allows efficient self-powered operation from the high-voltage bus through a series resistor.

Working Principle: MC33262PG Working Principle

The MC33262PG operates as a critical conduction mode (CRM) boost PFC controller. Key subsystems include: (1) Multiplier – the one-quadrant multiplier combines the rectified AC line voltage sense signal (Pin 3) with the error amplifier output (Pin 2) to generate a current reference that follows the line voltage waveform; this ensures the input current tracks the AC voltage for near-unity power factor; (2) Zero Current Detector – monitors the boost inductor voltage via an auxiliary winding (Pin 5); when the inductor current reaches zero, the diode voltage reverses, and the zero current detector triggers the MOSFET to turn on again; this variable-frequency CRM operation naturally achieves discontinuous input current; (3) Error Amplifier – a transconductance amplifier (Pin 1 output, Pin 2 inverting input) regulates the boost output voltage to the setpoint defined by the 2.5V bandgap reference; an external compensation network at Pin 2 provides loop stability; (4) Current Sense Comparator – compares the MOSFET current sense voltage (Pin 4) with the multiplier output; when peak current reaches the reference level, the MOSFET is turned off; cycle-by-cycle limiting ensures safe operation; (5) Overvoltage Protection – an OVP comparator monitors the feedback pin; if the output voltage exceeds approximately 106% of setpoint due to load removal, the drive output is disabled to prevent runaway; (6) Startup Timer – an internal timer provides periodic drive pulses during startup to charge the VCC supply from the bootstrap resistor, allowing the device to self-start without auxiliary supply.

Pin Description: MC33262PG Pin Definition and Functions
Pin Name Type Function
1 VFB Input Voltage feedback input (error amplifier inverting input and OVP)
2 COMP I/O Error amplifier output / multiplier input / compensation
3 MULT IN Input Multiplier input (rectified AC line voltage sense)
4 CS Input Current sense comparator input (MOSFET source current)
5 IDET Input Zero current detector input (auxiliary winding)
6 GND Ground Ground
7 OUT Output Totem-pole MOSFET gate drive output
8 VCC Power Supply voltage (12-28V, UVLO at 13V/7V)
Application Scenarios: In which products and applications is MC33262PG used
  • Offline boost PFC: 85-265VAC input to 400VDC bus for ATX/server power supplies
  • Electronic ballast: PFC pre-regulator for fluorescent and HID lighting
  • Industrial power supply: 100W-500W PFC front-end for 24V/48V output converters
  • Appliance power supply: PFC pre-converter for white goods and HVAC
  • Laptop adapter: 75W-120W PFC for universal input adapters
Alternative Models: What chips are recommended as replacements for MC33262PG
Manufacturer Part Number Package Notes
onsemi MC33262DR2G SOIC-8 Surface-mount version
onsemi NCP1608DR2G SOIC-8 Newer CRM PFC, lower IQ
TI UC3854DW SOIC-16 Average current mode PFC controller
ST L6562ATR SOIC-8 CRM PFC, pin-compatible alternative
Infineon ICE2PCS01GXUM1 SOIC-8 CCM PFC for higher power

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1