Opens in a new tab

OPA376AIDBVR

Precision low-noise op-amp, 5uV Vos, 7.5nV/rtHz, 5.5MHz GBW, RRO, SOT-23-5, e-trim

12314

Effective Inventory

Image for reference only

Manufacturer Part:

OPA376AIDBVR

Package:

SOT-23-5 (2.9 x 1.6 x 1.3 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The OPA376AIDBVR from Texas Instruments is a precision low-noise CMOS operational amplifier with e-trim technology, featuring 5uV offset, 7.5nV/rtHz noise, 5.5MHz bandwidth, and 760uA quiescent current in SOT-23-5.

Key Specifications

Channels 1
Supply Voltage 2.2V to 5.5V
Quiescent Current 760uA (typ)
Input Offset Voltage 5uV (typ), 25uV (max)
Offset Drift 0.26 uV/C (typ)
Gain Bandwidth 5.5 MHz
Slew Rate 2 V/us
Input Noise (1kHz) 7.5 nV/rtHz
0.1-10Hz Noise 0.8 uVpp
Input Bias Current 0.2 pA (typ)
CMRR 90 dB (typ)
PSRR 106 dB (typ)
Open-Loop Gain 134 dB
Output Type Rail-to-Rail
Package SOT-23-5
Operating Temperature -40 to +125 C

Features

  • e-trim technology for outstanding DC precision
  • 7.5 nV/rtHz low noise at 1kHz
  • 5uV typical offset voltage
  • Rail-to-rail input and output
  • Single-supply 2.2V to 5.5V operation
  • Excellent PSRR for battery-direct operation
  • EMI hardened inputs

Applications

  • ADC buffer amplifiers
  • Medical instrumentation
  • Sensor signal conditioning
  • Active filters
  • Audio equipment
Product Introduction: OPA376AIDBVR Product Introduction

The OPA376AIDBVR from Texas Instruments is a precision low-noise CMOS operational amplifier utilizing proprietary e-trim technology to achieve outstanding DC precision and AC performance in a compact SOT-23-5 package. The e-trim process trims the offset voltage during final manufacturing, resulting in a typical offset of only 5uV and maximum of 25uV without the need for external trimming. With 7.5nV/rtHz voltage noise density at 1kHz and 0.8uVpp noise in the 0.1-10Hz band, the OPA376 is suitable for precision signal conditioning where both low noise and low DC offset are critical. The rail-to-rail input and output stages maximize dynamic range in single-supply applications from 2.2V to 5.5V. A gain bandwidth product of 5.5MHz and slew rate of 2V/us provide adequate speed for most precision applications including active filters and ADC driver circuits. The quiescent current of 760uA typical (950uA max) makes the OPA376 suitable for battery-powered instruments. The excellent PSRR of 106dB allows direct operation from unregulated battery supplies without significant performance degradation. The EMI-hardened input design reduces susceptibility to RF interference in noisy environments. The OPA376 is part of a family that includes the OPA2376 (dual) and OPA4376 (quad) versions.

Working Principle: OPA376AIDBVR Working Principle

The OPA376AIDBVR operates as a precision CMOS operational amplifier using e-trim technology. Key subsystems include: (1) e-trim Technology – a post-package trimming technique that adjusts the input offset voltage during final manufacturing test; this eliminates the need for external trimming components and ensures low offset over temperature and time; (2) CMOS Input Stage – the CMOS input pair provides ultra-low input bias current of 0.2pA typical, making the device ideal for high-impedance sensor interfaces; the rail-to-rail input common-mode range is achieved through a complementary input pair architecture (PMOS and NMOS pairs in parallel); (3) Rail-to-Rail Output Stage – a common-source output stage swings to within millivolts of both supply rails, maximizing output dynamic range in single-supply applications; output current capability of 50mA (typical) drives moderate loads directly; (4) Frequency Compensation – internal dominant-pole compensation provides stable operation for closed-loop gains of 1 or greater; the 5.5MHz GBW and 2V/us slew rate support signal frequencies up to several hundred kHz; (5) EMI Filtering – on-chip EMI rejection filters at the input pins reduce susceptibility to conducted RF interference, preventing DC offset shifts caused by out-of-band signals; this is critical in environments with nearby RF transmitters or switching regulators.

Pin Description: OPA376AIDBVR Pin Definition and Functions
Pin Name Function
1 OUT Amplifier output (rail-to-rail)
2 V- Negative supply / ground
3 IN+ Non-inverting input (rail-to-rail)
4 IN- Inverting input
5 V+ Positive supply (2.2V to 5.5V)
Application Scenarios: In which products and applications is OPA376AIDBVR used
  • ADC buffer: rail-to-rail output directly drives SAR ADC inputs with 5uV offset precision
  • Medical ECG front-end: 0.2pA bias current prevents electrode polarization, 7.5nV noise preserves signal
  • Strain gauge amplifier: 134dB open-loop gain ensures accurate gain setting, 0.26uV/C drift stability
  • Active filter: 5.5MHz GBW supports 2nd-order filters up to 100kHz corner frequency
  • Battery instrument: 106dB PSRR allows direct battery supply without regulator
Alternative Models: What chips are recommended as replacements for OPA376AIDBVR
Manufacturer Part Number Package Notes
TI OPA2376AIDGKR VSSOP-8 Dual version of OPA376
TI OPA4376AIRTER TSSOP-14 Quad version of OPA376
ADI ADA4522-1ARMZ MSOP-8 Zero-drift, 5.8nV noise
TI OPA333AIDBVR SOT-23-5 Zero-drift, 1.8V min supply
TI OPA320AIDBVR SOT-23-5 Lower noise (3.5nV), 20MHz GBW

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1