Opens in a new tab

TPS55340QRTETQ1

28V/5A automotive boost converter, 2MHz, AEC-Q100, VQFN-16, adjustable frequency

2014

Effective Inventory

Image for reference only

Manufacturer Part:

TPS55340QRTETQ1

Package:

VQFN-16 (3.0 x 3.0 x 0.9 mm, RTE package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS55340QRTETQ1 from Texas Instruments is an automotive-qualified 5V to 28V input, 5A integrated switch boost/SEPIC/flyback converter with 2MHz switching frequency in a VQFN-16 package.

Key Specifications

Topology Boost / SEPIC / Flyback
Input Voltage 2.7V to 28V (operating)
Output Voltage Up to 38V
Switch Current 5A (integrated NPN)
Switching Frequency 2MHz (adjustable 100kHz-2.2MHz)
Reference Voltage 1.204V +/-2%
Quiescent Current 3.5mA (typ)
Shutdown Current 1.5uA (typ)
Synchronous No (external diode required)
AEC-Q100 Grade 1 (-40 to +125C)
Package VQFN-16 (3mm x 3mm)
Operating Temperature -40 to +125 C

Features

  • AEC-Q100 Grade 1 qualified for automotive
  • Wide input range 2.7V to 28V
  • 5A integrated NPN power switch
  • 2MHz max switching frequency for small inductors
  • Frequency synchronization capability
  • Programmable soft-start
  • Overcurrent protection and thermal shutdown
  • Power-good output

Applications

  • Automotive LED lighting
  • Industrial boost converters
  • Battery-powered boost supplies
  • SEPIC regulators for automotive
Product Introduction: TPS55340QRTETQ1 Product Introduction

The TPS55340QRTETQ1 from Texas Instruments is an automotive-qualified non-synchronous boost/SEPIC/flyback DC/DC converter with an integrated 5A NPN power switch. The device operates from an input voltage range of 2.7V to 28V and can generate output voltages up to 38V, making it suitable for a wide range of automotive and industrial boost applications. The 2MHz maximum switching frequency allows the use of small external inductors and capacitors, minimizing solution size and cost. The switching frequency can be adjusted from 100kHz to 2.2MHz via an external resistor on the RT pin, and an external synchronization clock can be applied to the SYNC pin for systems requiring frequency alignment with other switching converters. The converter uses current-mode control with internal slope compensation for stable operation across a wide range of input/output voltages and inductor values. A programmable soft-start limits inrush current during startup. Protection features include cycle-by-cycle overcurrent protection, undervoltage lockout (UVLO), and thermal shutdown. A power-good (PG) open-drain output indicates when the output voltage is within regulation. The device is AEC-Q100 Grade 1 qualified, supporting operation from -40 to +125C ambient, making it suitable for under-hood automotive applications such as LED headlight drivers and industrial boost converters. The compact VQFN-16 package (3x3mm) minimizes board space requirements.

Working Principle: TPS55340QRTETQ1 Working Principle

The TPS55340QRTETQ1 operates as a current-mode boost converter with an integrated NPN power switch. Key subsystems include: (1) Current-Mode PWM Controller – the error amplifier compares the FB pin voltage with the 1.204V reference; the error amplifier output (via COMP pin) sets the peak switch current threshold; the PWM comparator turns off the NPN switch when the peak current reaches the threshold; this provides cycle-by-cycle current limiting and simplifies loop compensation; (2) Integrated NPN Switch – a 5A NPN Darlington power switch connects between VIN (via inductor) and SW pin; when the switch turns on, inductor current ramps up; when off, the inductor current flows through the external Schottky diode to the output; (3) Boost Operation – output voltage is set by VOUT = 1.204V x (1 + R1/R2) where R1 connects from VOUT to FB and R2 from FB to GND; the converter operates in continuous conduction mode (CCM) at heavy loads and discontinuous conduction mode (DCM) at light loads; (4) Frequency Control – the RT pin sets the switching frequency via a resistor to GND; the SYNC pin accepts an external clock for synchronization; (5) Protection – cycle-by-cycle current limit at approximately 7A peak; UVLO disables switching when VIN drops below threshold; thermal shutdown at approximately 165C junction; soft-start ramps the COMP voltage gradually to limit inrush current.

Pin Description: TPS55340QRTETQ1 Pin Definition and Functions
Pin Name Function
1-2 VIN Input supply (2.7V to 28V)
3-4 SW Switch node (connect to inductor and catch diode)
5 EN Enable (high=on, internal pull-up)
6 FB Output voltage feedback
7 COMP Error amplifier output / compensation
8 SS Soft-start (connect capacitor to GND)
9 RT/SYNC Frequency set resistor / sync clock input
10 PG Power-good output (open-drain)
11-12 GND Ground and thermal pad
13 NC No connect
14 AGND Analog ground
Application Scenarios: In which products and applications is TPS55340QRTETQ1 used
  • Automotive LED headlight boost: 12V battery to 30V/2A for series LED string
  • Industrial 5V to 24V boost: power 24V sensors from 5V logic supply
  • SEPIC battery regulator: maintain stable 12V output from 6V-18V automotive battery
  • Audio amplifier supply: 12V to +/-18V dual output using flyback topology
Alternative Models: What chips are recommended as replacements for TPS55340QRTETQ1
Manufacturer Part Number Package Notes
TI TPS55340QRTERQ1 VQFN-16 Same device, different tape format
TI LM2733XMY/NOPB DFN-8 1.6MHz boost, 1A switch
Monolithic Power MP3428DN-LF-Z QFN-14 4.5-22V/3.6A boost
TI TPS61175PWPR TSSOP-14 3-18V/3A boost, non-automotive

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1