Opens in a new tab

TPS82140SILR

3-17V/2A integrated inductor buck module, 2MHz, DCS-Control, 2 caps only, MicroSiP BGA

2974

Effective Inventory

Image for reference only

Manufacturer Part:

TPS82140SILR

Package:

MicroSiP BGA (2.8 x 2.9 x 1.5 mm, 15 bumps)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS82140SILR from Texas Instruments is a 3-17V input, 2A MicroSiP step-down power module integrating the inductor in a 2.8×2.9×1.5mm BGA package, requiring only two external capacitors.

Key Specifications

Topology Synchronous Buck (integrated inductor)
Input Voltage 3V to 17V
Output Voltage 0.9V to 6V (adjustable)
Output Current 2A
Switching Frequency 2MHz
Integrated Inductor Yes (0.47uH)
Reference Voltage 0.8V +/-1%
Quiescent Current 17uA (DCS-Control, PFM mode)
External Components 2 capacitors only
Package MicroSiP BGA (2.8 x 2.9 x 1.5mm)
Operating Temperature -40 to +125 C

Features

  • Integrated inductor eliminates external inductor selection
  • Only 2 external capacitors needed for complete solution
  • Ultra-small 2.8 x 2.9mm MicroSiP package
  • DCS-Control for seamless PWM/PFM transition
  • 17uA IQ in light-load PFM mode
  • 2MHz fixed frequency for low output ripple

Applications

  • Space-constrained portable devices
  • Point-of-load regulation for FPGAs/CPUs
  • Battery-powered instruments
  • Industrial sensor power
Product Introduction: TPS82140SILR Product Introduction

The TPS82140SILR from Texas Instruments is a complete 2A step-down DC/DC converter in an ultra-small MicroSiP (Micro System-in-Package) module that integrates the switching regulator IC and the inductor into a single 2.8 x 2.9 x 1.5mm BGA package. This integration eliminates the most difficult aspect of buck converter design – inductor selection and layout – and reduces the total solution to just the module plus two external capacitors (input and output). The device operates from a 3V to 17V input and produces an adjustable output from 0.9V to 6V at up to 2A continuous load current. The DCS-Control (Direct Control with Seamless transition) topology provides fast transient response and seamless transition between PWM mode (for heavy loads) and PFM mode (for light loads), maintaining high efficiency across the entire load range. In PFM mode, the quiescent current is only 17uA, making the device ideal for battery-powered applications that spend significant time in sleep or standby modes. The 2MHz fixed switching frequency keeps the output voltage ripple low and enables smaller external capacitors. The integrated 0.47uH inductor is optimized for the converter’s operating range and eliminates the risk of inductor saturation or poor performance due to incorrect inductor selection. The TPS82140 is pin-compatible with other TPS821xx modules offering different current ratings (TPS82130 for 1A, TPS82150 for 1.5A).

Working Principle: TPS82140SILR Working Principle

The TPS82140SILR operates as a synchronous buck converter using TI’s DCS-Control topology. Key subsystems include: (1) DCS-Control – a proprietary control scheme that combines voltage-mode control with direct feedforward of input and output voltage for fast transient response; in steady-state PWM mode, the device operates at 2MHz fixed frequency; when the load decreases below the PFM threshold, the device transitions seamlessly to PFM (pulse frequency modulation) mode, skipping pulses to maintain high efficiency at light loads; the transition is seamless without output voltage disturbance; (2) Integrated Power Stage – the module includes the high-side and low-side MOSFET switches and the 0.47uH inductor on a single substrate; the inductor is a thin-film type with low DCR and controlled parasitic characteristics; (3) Feedback and Regulation – the FB pin connects to an external resistor divider setting the output voltage; the 0.8V +/-1% reference ensures accurate output regulation; (4) Soft-Start – an internal soft-start ramps the output voltage gradually to limit inrush current; (5) Protection – cycle-by-cycle current limit protects the integrated switches; thermal shutdown disables switching at approximately 155C junction; undervoltage lockout (UVLO) prevents operation below 2.7V input; the EN pin provides enable/disable control.

Pin Description: TPS82140SILR Pin Definition and Functions
Pin Name Function
A1 VOUT Regulated output voltage (connect output capacitor)
A2 VOUT Regulated output voltage
A3 EN Enable (high=on, internal pull-up to VIN)
B1 GND Power ground
B2 FB Feedback (connect resistor divider from VOUT to GND)
B3 PG Power-good output (open-drain)
C1 VIN Input supply (3V to 17V, connect input capacitor)
C2 VIN Input supply
C3 GND Signal ground
Application Scenarios: In which products and applications is TPS82140SILR used
  • FPGA core power: 5V or 12V input to 1.0V/1.2V at 2A with minimal board area
  • Portable instrument: 3.7V Li-Ion to 3.3V, PFM mode extends battery life at light load
  • Industrial sensor: 12V or 24V to 3.3V/5V, integrated inductor eliminates design risk
  • Wearable device: tiny 2.8×2.9mm footprint for space-constrained PCB layouts
Alternative Models: What chips are recommended as replacements for TPS82140SILR
Manufacturer Part Number Package Notes
TI TPS82130SILR MicroSiP 1A version, pin-compatible
TI TPS82150SILR MicroSiP 1.5A version, pin-compatible
TI TPS82140SILR MicroSiP 2A version (this device)
TI TPS82085SILR MicroSiP 2A, 2.5-6V input, lower voltage range
Monolithic Power MPM3810GQV-Z QFN-18 2A module, 3.3-15V, integrated inductor

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1