Opens in a new tab

TPS543320RPYR

4.5-22V/3A sync buck, 500k-2.2MHz, 5uA IQ, spread spectrum, HotRod QFN-12

4922

Effective Inventory

Image for reference only

Manufacturer Part:

TPS543320RPYR

Package:

HotRod QFN-12 (3.0 x 3.0 x 0.9 mm, RPY package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS543320RPYR from Texas Instruments is a 4.5-22V input, 3A synchronous buck converter with 500kHz to 2.2MHz adjustable frequency and optional spread spectrum in a HotRod QFN package.

Key Specifications

Topology Synchronous Buck
Input Voltage 4.5V to 22V
Output Voltage 0.6V to 7V (adjustable)
Output Current 3A
Switching Frequency 500kHz to 2.2MHz (adjustable)
Reference Voltage 0.6V +/-1%
IQ (PFM) 5uA (typ)
Spread Spectrum Optional (pin-selectable)
Package HotRod QFN-12 (3.0 x 3.0mm)
Operating Temperature -40 to +125 C

Features

  • 4.5-22V wide input range for industrial and automotive
  • 3A output with integrated MOSFETs
  • 5uA ultra-low IQ in PFM mode
  • Optional spread spectrum for EMI reduction
  • HotRod QFN package eliminates wire bonds for lower RDS(on)
  • Forced PWM or PFM mode selectable

Applications

  • Industrial point-of-load supplies
  • Automotive infotainment power
  • 5V/12V to low-voltage regulation
  • EMI-sensitive applications
Product Introduction: TPS543320RPYR Product Introduction

The TPS543320RPYR from Texas Instruments is a 3A synchronous step-down converter with a wide 4.5V to 22V input range, designed for industrial and automotive point-of-load power applications. The device features TI’s HotRod QFN package technology, which flips the die and attaches it directly to the leadframe without wire bonds, reducing parasitic inductance and on-resistance for improved efficiency and lower EMI. The converter operates at an adjustable switching frequency from 500kHz to 2.2MHz, allowing designers to balance efficiency and solution size. A unique spread spectrum feature (pin-selectable) modulates the switching frequency by +/-6% with a pseudo-random pattern, reducing peak EMI emissions and helping systems pass CISPR 25 and other EMI standards without additional shielding or filtering. The DCS-Control topology provides seamless transition between forced PWM mode (for tight regulation and constant frequency) and PFM mode (for high efficiency at light loads with only 5uA quiescent current). The 0.6V +/-1% reference voltage enables output voltages as low as 0.6V for modern low-voltage processors and FPGAs. Integrated high-side and low-side MOSFETs deliver up to 3A continuous output current. Protection features include cycle-by-cycle current limit, undervoltage lockout with programmable threshold via EN pin, output overvoltage protection, and thermal shutdown. The compact 3x3mm HotRod QFN-12 package provides excellent thermal performance with a low junction-to-ambient thermal resistance.

Working Principle: TPS543320RPYR Working Principle

The TPS543320RPYR operates as a synchronous buck converter using DCS-Control topology. Key subsystems include: (1) DCS-Control – a proprietary control scheme providing fast transient response through direct feedforward of input and output voltage; the control loop operates in voltage mode with internal compensation; in PWM mode, the device switches at the programmed frequency; in PFM mode at light loads, switching pulses are skipped to reduce losses; (2) Integrated Power MOSFETs – the HotRod QFN package mounts the die with copper pillars directly to the leadframe, eliminating bond wire resistance and inductance; the high-side MOSFET connects VIN to SW, the low-side MOSFET connects SW to GND; (3) Spread Spectrum – when the SS pin is pulled high, a pseudo-random number generator modulates the switching frequency by +/-6% around the center frequency; this spreads the switching harmonic energy across a wider bandwidth, reducing peak emissions in the EMI spectrum; when SS is low, the device operates at the fixed frequency set by the RT resistor; (4) Mode Selection – the MODE pin selects between forced PWM (constant frequency across all loads) and auto PFM/PWM (high efficiency at light loads); forced PWM is preferred for EMI-sensitive or audio applications where variable frequency is undesirable; (5) Protection – cycle-by-cycle current limit (typically 4.5A-6A); OVP (overvoltage protection) activates the low-side MOSFET to discharge the output if VOUT exceeds the setpoint by 8%; thermal shutdown at approximately 165C.

Pin Description: TPS543320RPYR Pin Definition and Functions
Pin Name Function
1 VIN Input supply (4.5V to 22V)
2 SW Switch node (connect to inductor)
3 GND Power ground (thermal pad)
4 BOOT Bootstrap capacitor for high-side gate drive
5 FB Output voltage feedback (resistor divider)
6 EN Enable / UVLO adjust (internal pull-up)
7 SS Spread spectrum enable (high=SS on, low=off)
8 MODE Mode select (high=FPWM, low=PFM/PWM auto)
9 RT Frequency set resistor (connect to GND)
10 PG Power-good output (open-drain)
11 PGOOD Power-good threshold select
12 AGND Analog ground
Application Scenarios: In which products and applications is TPS543320RPYR used
  • Automotive infotainment: 12V battery to 3.3V/5V with spread spectrum for CISPR 25 compliance
  • Industrial PLC: 24V to 1.2V for FPGA core, PFM mode for low standby power
  • Test equipment: 12V to 1.8V/0.9V for ADC/DAC rails, FPWM for low output ripple
  • Battery-powered IoT: 3-cell Li-Ion (9-12.6V) to 3.3V, 5uA IQ in PFM sleep mode
Alternative Models: What chips are recommended as replacements for TPS543320RPYR
Manufacturer Part Number Package Notes
TI TPS543620RPYR HotRod QFN-12 4.5-28V/3A, wider input range
TI TPS54520RPYR HotRod QFN-12 4.5-17V/5A, higher current
Monolithic Power MPQ4420GQBE-AEC1-Z QFN-16 4-36V/2A, automotive
TI TPS62933DRLR HotRod QFN-6 3.8-30V/3A, smaller package

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1