Opens in a new tab

ST1480ABDR

3.3V RS-485 half-duplex transceiver, 20Mbps, 1/8 unit load, SOIC-8

3130

Effective Inventory

Image for reference only

Manufacturer Part:

ST1480ABDR

Package:

SOIC-8 (4.9 x 3.9 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ST1480ABDR from STMicroelectronics is a 3.3V RS-485/RS-422 transceiver with 20Mbps data rate, 1/8 unit load (256 nodes), and wide common-mode range in an SOIC-8 package.

Key Specifications

Interface RS-485/RS-422
Supply Voltage 3.0V to 3.6V
Data Rate 20 Mbps
Duplex Half-Duplex
Drivers/Receivers 1/1
Unit Load 1/8 (256 nodes per bus)
Bus Common-Mode Range -7V to +12V
Driver Output Voltage 1.5V min (differential)
Receiver Sensitivity +/-200mV
Fail-Safe Yes (open/short = high)
ESD Protection +/-15kV HBM on bus pins
Package SOIC-8
Operating Temperature -40 to +85 C

Features

  • 3.3V operation for low-power systems
  • 20Mbps data rate for high-speed communication
  • 1/8 unit load supports 256 nodes on one bus
  • Extended -7V to +12V common-mode range
  • True fail-safe receiver (open/short = logic high)
  • +/-15kV ESD protection on bus pins
  • Hot-swap capable inputs

Applications

  • 3.3V RS-485 networks
  • Industrial automation (Modbus, Profibus)
  • Building automation
  • Telecom level translation
Product Introduction: ST1480ABDR Product Introduction

The ST1480ABDR from STMicroelectronics is a 3.3V low-power RS-485/RS-422 half-duplex transceiver supporting data rates up to 20Mbps. Designed for 3.3V systems, the device eliminates the need for a 5V supply that traditional RS-485 transceivers require, simplifying power supply design in modern low-voltage systems. The 1/8 unit load receiver input impedance allows up to 256 transceivers on a single RS-485 bus, enabling large network installations in industrial and building automation applications. The extended bus common-mode range of -7V to +12V provides robust operation in noisy industrial environments where ground potential differences can be significant. The true fail-safe receiver feature ensures a logic high output when the receiver inputs are open (disconnected bus) or shorted together, preventing undefined receiver states during bus idle periods. The device supports data rates up to 20Mbps for high-speed RS-485 applications, and the driver output slew rate is optimized for reduced EMI while maintaining fast edge rates for high data rates. ESD protection of +/-15kV on the bus pins (A, B) provides robust protection against electrostatic discharge events. The hot-swap capability on the driver and receiver enable inputs prevents bus disturbance during circuit power-up or hot insertion. The ST1480ABDR is available in an 8-pin SOIC package and is pin-compatible with many industry-standard RS-485 transceivers.

Working Principle: ST1480ABDR Working Principle

The ST1480ABDR operates as a 3.3V half-duplex RS-485/RS-422 transceiver. Key subsystems include: (1) Driver Section – when DE is high, the driver converts single-ended DI input into differential output on the A/B bus lines; the differential output voltage is guaranteed at least 1.5V across a 54-ohm load (RS-422) or 1.5V across a 27-ohm load (RS-485); the driver output slew rate is optimized for the 20Mbps data rate; when DE is low, the driver outputs are three-stated; (2) Receiver Section – when RE is low, the receiver compares the differential voltage (VA-VB) against +/-200mV thresholds; if VA-VB > 200mV, RO is high; if VA-VB < -200mV, RO is low; the true fail-safe feature ensures RO is high when inputs are open or shorted (VA=VB); when RE is high, RO is three-stated; (3) 3.3V Operation – the entire device operates from a 3.0V to 3.6V supply, compatible with 3.3V logic; the bus driver outputs still meet RS-485 voltage specifications despite the lower supply; (4) Hot-Swap – when VCC ramps up or the device is hot-inserted, internal circuitry holds DE and RE pins in a defined state until VCC is stable, preventing spurious bus activity; (5) ESD Protection – the bus pins (A, B) have dedicated ESD clamp structures rated for +/-15kV HBM.

Pin Description: ST1480ABDR Pin Definition and Functions
Pin Name Function
1 RO Receiver output
2 RE Receiver enable (active low)
3 DE Driver enable (active high)
4 DI Driver input
5 GND Ground
6 A Non-inverting bus I/O
7 B Inverting bus I/O
8 VCC 3.3V supply (3.0V to 3.6V)
Application Scenarios: In which products and applications is ST1480ABDR used
  • 3.3V Modbus RTU: 256-node network at 115kbps with 3.3V MCU interface
  • Building automation BACnet: 3.3V logic to RS-485 bus with fail-safe idle state
  • Industrial sensor network: 20Mbps high-speed data acquisition from multiple 3.3V nodes
  • Telecom level translation: 3.3V FPGA to RS-485 backplane with extended common-mode range
Alternative Models: What chips are recommended as replacements for ST1480ABDR
Manufacturer Part Number Package Notes
TI SN65HVD3082EDR SOIC-8 3.3V RS-485, 200kbps, similar
TI SN65HVD72DR SOIC-8 3.3V, 1Mbps, fail-safe
Maxim/ADI MAX3485ECSA+ SOIC-8 3.3V RS-485, 10Mbps
Intersil/Renesas ISL3175EIBZ SOIC-8 3.3V, 20Mbps, fail-safe

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1