Opens in a new tab

TPS54620RHLR

4.5-17V/6A sync buck SWIFT, 26/19mOhm FETs, 1.6MHz, VQFN-14

2253

Effective Inventory

Image for reference only

Manufacturer Part:

TPS54620RHLR

Package:

VQFN-14 (3.5 x 3.5 x 1.0 mm, RHL package w/ thermal pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS54620RHLR from Texas Instruments is a 4.5-17V input, 6A synchronous SWIFT step-down converter with integrated 26mOhm/19mOhm MOSFETs, 200kHz-1.6MHz switching frequency, in a 14-pin VQFN package.

Key Specifications

Topology Synchronous Buck (SWIFT)
Input Voltage 4.5V to 17V
PVIN Range 1.6V to 17V (separate power rail)
Output Voltage 0.8V to 5.5V (adjustable)
Output Current 6A
Integrated MOSFETs 26 mOhm (high-side) / 19 mOhm (low-side)
Switching Frequency 200kHz to 1.6MHz (resistor set)
Reference Voltage 0.8V +/-1%
Shutdown IQ 2 uA
Control Mode Current Mode
Package VQFN-14 (3.5 x 3.5mm, RHL)
Operating Temperature -40 to +150 C (TJ)

Features

  • Integrated 26mOhm/19mOhm MOSFETs for high efficiency
  • Separate PVIN rail for wide input flexibility
  • 200kHz to 1.6MHz programmable frequency
  • External clock synchronization
  • 0.8V +/-1% voltage reference
  • Power-good output with UV/OV monitoring
  • Adjustable soft-start and power sequencing
  • Monotonic startup into pre-biased output

Applications

  • Point-of-load regulation for FPGAs/processors
  • High-density distributed power systems
  • Broadband and networking equipment
  • Embedded computing power supplies
Product Introduction: TPS54620RHLR Product Introduction

The TPS54620RHLR from Texas Instruments is a 6A synchronous step-down DC/DC converter from the SWIFT (Switcher With Integrated FET Technology) family, featuring a 4.5V to 17V input range and an adjustable output from 0.8V to 5.5V. The device integrates a 26mOhm high-side MOSFET and a 19mOhm low-side MOSFET in a compact 3.5×3.5mm VQFN-14 package, delivering high efficiency in a small footprint. The separate PVIN rail allows the power stage to operate from a different voltage (1.6V to 17V) than the control circuitry, enabling flexible power architecture designs. The current-mode control with external compensation provides design flexibility across a wide range of output inductors and capacitors. The switching frequency is programmable from 200kHz to 1.6MHz via an external resistor, allowing designers to optimize the tradeoff between efficiency and solution size. An external clock synchronization input enables multiple converters to switch at the same frequency, eliminating beat frequencies in multi-rail systems. The 0.8V +/-1% reference voltage over temperature supports very low output voltages for modern processors and FPGAs. The power-good (PG) output monitors both undervoltage and overvoltage conditions and can be used for power sequencing. The adjustable soft-start controls the output voltage ramp rate, and monotonic startup into pre-biased outputs prevents reverse current during power sequencing. Cycle-by-cycle current limiting on the high-side FET and low-side current limiting protect against overload conditions.

Working Principle: TPS54620RHLR Working Principle

The TPS54620RHLR operates as a synchronous buck converter using current-mode control. Key subsystems include: (1) Current-Mode Control – the inner current loop (inductor current) is closed around the PWM comparator; the error amplifier output (COMP pin) sets the peak inductor current; when the sensed current reaches the COMP level, the high-side FET turns off; this provides inherent cycle-by-cycle current limiting and simplified loop compensation; (2) Integrated MOSFETs – the 26mOhm high-side MOSFET connects VIN to SW and the 19mOhm low-side MOSFET connects SW to GND; the low RDS(on) values minimize conduction losses (P = I^2 x RDS(on)); the separate PVIN pin allows the high-side FET to be powered from a different source than the control logic; (3) Frequency Programming – an external resistor from the RT/CLK pin to GND sets the switching frequency; higher frequencies reduce inductor size but increase switching losses; the RT/CLK pin also accepts an external clock for synchronization; (4) Soft-Start – the SS/TR pin ramps the reference voltage from 0V to 0.8V; an external capacitor sets the ramp time; this limits inrush current during startup; if the output is pre-biased, the converter starts in diode emulation mode until the soft-start voltage exceeds the feedback voltage; (5) Power-Good – the PG pin is an open-drain output that goes high-impedance when VOUT is within the specified window (typically 91-109% of target); UV and OV thresholds provide bidirectional monitoring.

Pin Description: TPS54620RHLR Pin Definition and Functions
Pin Name Function
1 VIN Input supply (4.5V to 17V)
2 PVIN Power stage input (1.6V to 17V, separate rail)
3 SW Switch node (to inductor)
4 GND Ground / thermal pad
5 BOOT Bootstrap capacitor for HS gate drive
6 COMP Error amplifier output (compensation network)
7 FB Output voltage feedback (resistor divider)
8 SS/TR Soft-start / tracking (external capacitor)
9 EN Enable (adjustable UVLO with external resistors)
10 RT/CLK Frequency setting resistor / ext clock sync
11 PG Power-good output (open-drain)
12-14 VIN/GND Additional power/ground connections
Application Scenarios: In which products and applications is TPS54620RHLR used
  • FPGA core power: 5V or 12V to 1.0V at 6A for high-end FPGA core rail with 0.8V reference
  • Processor rail: 12V to 1.8V DDR3 supply at 6A with PG output for power sequencing
  • Multi-rail system: synchronized 3x TPS54620 at 500kHz for core, I/O, and memory rails
  • Networking blade: 12V intermediate bus to 3.3V at 6A with 1.6MHz for compact solution
Alternative Models: What chips are recommended as replacements for TPS54620RHLR
Manufacturer Part Number Package Notes
TI TPS543620RPYR VQFN-14 4-18V/6A, internal compensation
TI TPS544B20RVFR VQFN-20 4.5-18V/20A, higher current
Monolithic Power MP8759GQ-P QFN-20 4.5-18V/9A sync buck
TI TPS54620RHLR VQFN-14 Same device (this part)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1