Opens in a new tab

TLP293

3750Vrms photocoupler, 50% CTR, GaAIA LED, SO6L, industrial grade

5607

Effective Inventory

Image for reference only

Manufacturer Part:

TLP293

Package:

SO6L (3.7 x 4.6 x 2.3 mm, >5mm creepage/clearance)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TLP293 from Toshiba is a 3750Vrms photocoupler in a SO6L package with a GaAIA LED and photo-transistor detector, 50mA CTR, and 110C operating temperature for industrial isolation.

Key Specifications

Isolation Voltage 3750 Vrms (min)
LED Type GaAIA (gallium aluminum arsenide)
Detector Photo-transistor
CTR (Current Transfer Ratio) 50% (min) @ IF=5mA
LED Forward Current 50 mA (max)
LED Forward Voltage 1.3V (typ @ IF=5mA)
Collector Current 50 mA (max)
Collector-Emitter Voltage 80V
Bandwidth (Cutoff) -3dB @ 80kHz (typ, RL=1kOhm)
Package SO6L (4-pin, 3.7 x 4.6mm, wide creepage)
Operating Temperature -55 to +110 C

Features

  • 3750Vrms reinforced isolation voltage
  • 50% minimum CTR at IF=5mA
  • High-reliability GaAIA LED (low degradation)
  • Wide creepage SO6L package (>5mm creepage)

Applications

  • Industrial control signal isolation
  • Switch-mode power supply feedback
  • Programmable logic controller I/O
  • Appliance motor drive isolation
Product Introduction: TLP293 Product Introduction

The TLP293 from Toshiba is a 3750Vrms isolation voltage photocoupler in a compact SO6L surface-mount package with a gallium aluminum arsenide (GaAIA) infrared LED and a silicon NPN photo-transistor detector. The GaAIA LED technology provides superior long-term reliability compared to conventional GaAs LEDs, with lower light output degradation over time, ensuring stable current transfer ratio (CTR) throughout the device lifetime. The 50% minimum CTR at IF=5mA ensures reliable signal transfer even at low LED drive currents, making the TLP293 suitable for low-power isolation applications. The SO6L package provides a creepage distance of greater than 5mm, meeting the safety requirements for reinforced isolation in industrial and appliance applications per IEC 60747-5-5 and UL 1577. The 3750Vrms isolation rating provides a safety barrier between high-voltage circuits (mains-connected) and low-voltage logic circuits. The 80V collector-emitter voltage rating is adequate for most logic-level output interfaces. The -55 to +110C operating temperature range covers industrial and consumer applications. The TLP293 is commonly used for signal isolation in switch-mode power supplies (feedback loop isolation), programmable logic controller (PLC) digital I/O, motor drive control signal isolation, and appliance safety isolation barriers.

Working Principle: TLP293 Working Principle

The TLP293 operates as an optically-coupled isolator using a GaAIA LED and photo-transistor. Key subsystems include: (1) GaAIA LED – when forward current flows through the LED (pins 1-2), infrared photons are emitted; the GaAIA (gallium aluminum arsenide) material provides higher quantum efficiency and better long-term stability than conventional GaAs LEDs; the forward voltage is approximately 1.3V at 5mA; (2) Optical Coupling – the infrared photons travel across the transparent insulation die (typically silicone or polyimide) between the LED and the photo-transistor; the dielectric strength of this insulation provides the 3750Vrms isolation rating; the coupling efficiency determines the CTR; (3) Photo-Transistor – the infrared photons strike the base region of the NPN photo-transistor, generating base current proportional to the light intensity; this photo-current is amplified by the transistor beta, producing a collector current; the CTR (IC/IF) of 50% minimum at IF=5mA means that 2.5mA of collector current is guaranteed when 5mA flows through the LED; (4) Signal Isolation – the input (LED) and output (photo-transistor) are electrically isolated; the only coupling mechanism is optical; this prevents ground loops, provides level shifting between voltage domains, and ensures safety isolation between high-voltage and low-voltage circuits; (5) Speed – the photo-transistor has a relatively slow response (bandwidth approximately 80kHz) due to the Miller capacitance and base storage effects; for faster applications, a pin photodiode or logic-output coupler should be used.

Pin Description: TLP293 Pin Definition and Functions
Pin Name Function
1 Anode LED anode (input side)
2 Cathode LED cathode (input side)
3 NC No connect
4 Emitter Photo-transistor emitter (output side)
5 Collector Photo-transistor collector (output side)
6 NC No connect
Application Scenarios: In which products and applications is TLP293 used
  • SMPS feedback: isolate error amplifier output from secondary to primary side in offline flyback converter
  • PLC digital input: 24V industrial signal isolated to 3.3V MCU input through TLP293 with pull-up resistor
  • Motor drive isolation: isolate PWM gate drive signals from control side in inverter drive
  • Appliance safety: isolate user-accessible control panel from mains-connected power electronics
Alternative Models: What chips are recommended as replacements for TLP293
Manufacturer Part Number Package Notes
Toshiba TLP291 SO6L Lower CTR version (50% min @ IF=5mA, same as TLP293)
Toshiba TLP785 DIP-4 Through-hole version, higher CTR
Broadcom HCPL-817-00AE DIP-4 Industry standard 4N25 class
Vishay SFH610A-3 DIP-4 5300Vrms, through-hole

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1