Opens in a new tab

AD603ARZ-REEL7

90MHz VGA, 0-40dB gain, 25mV/dB control, 1.3nV/rtHz noise, SOIC-8

1915

Effective Inventory

Image for reference only

Manufacturer Part:

AD603ARZ-REEL7

Package:

8-SOIC (4.9 x 3.9 x 1.75 mm, R package)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The AD603ARZ-REEL7 from Analog Devices is a low-noise 90MHz variable gain amplifier (VGA) with 0dB to +40dB gain range, programmable via a differential control voltage, in an 8-SOIC package.

Key Specifications

Function Low-Noise Variable Gain Amplifier (VGA)
Bandwidth 90 MHz (at all gain settings)
Gain Range 0 dB to +40 dB (AD603A version)
Gain Scaling 25 mV/dB (40 dB/V)
Gain Accuracy +/-0.5 dB (typ)
Input Noise 1.3 nV/rtHz (referred to input at max gain)
Supply Voltage +/-4.75V to +/-5.25V
Supply Current 17 mA (typ per amplifier)
Output Swing +/-3.0V (min, RL=500 Ohm)
Package 8-SOIC
Operating Temperature -40 to +85 C

Features

  • 90MHz bandwidth independent of gain setting
  • 0-40dB gain range with 25mV/dB control
  • 1.3nV/rtHz ultra-low input noise
  • Differential gain control interface
  • +/-0.5dB gain accuracy
  • Serial or parallel cascading for extended gain range

Applications

  • Ultrasound imaging time-gain compensation
  • RF/IF automatic gain control (AGC)
  • Radar and sonar signal processing
  • Medical imaging receivers
Product Introduction: AD603ARZ-REEL7 Product Introduction

The AD603ARZ-REEL7 from Analog Devices is a low-noise, voltage-controlled variable gain amplifier (VGA) optimized for applications requiring precise gain control over a wide frequency range. The device provides a gain range of 0dB to +40dB (AD603A version) with a linear-in-dB response controlled by a differential voltage on the GNEG and GPOS pins. The gain scaling factor is 25mV/dB (equivalently, 40dB per volt of control voltage), enabling precise gain programming from a DAC or other voltage source. A key feature of the AD603 is its constant 90MHz bandwidth across the entire gain range, unlike traditional VGA circuits where bandwidth varies with gain. This is achieved through ADI’s proprietary X-AMP (eXponential AMPlifier) architecture, which uses a fixed-gain amplifier preceded by a variable attenuator based on a patented interpolating DAC. The ultra-low 1.3nV/rtHz input-referred noise at maximum gain makes the AD603 suitable for receiving weak signals in ultrasound, radar, and communications systems. The gain accuracy of +/-0.5dB (typical) ensures repeatable performance across devices and temperature. The differential gain control interface provides 30dB of common-mode rejection on the control lines, rejecting noise and offset. Two AD603 devices can be cascaded in series (output of one feeding the input of the next) to achieve 0-80dB gain range, or in parallel for improved noise performance.

Working Principle: AD603ARZ-REEL7 Working Principle

The AD603ARZ-REEL7 operates using ADI’s proprietary X-AMP architecture. Key subsystems include: (1) X-AMP Architecture – the signal path consists of a passive 42dB R-2R ladder attenuator followed by a fixed-gain amplifier; the attenuator has multiple tap points; an interpolating circuit smoothly transitions between adjacent taps, controlled by the differential voltage on GPOS/GNEG; this provides continuous gain adjustment with a linear-in-dB response; (2) Gain Control – the gain is determined by the differential voltage VCTL = VGPOS – VGNEG; the gain in dB = 40 x VCTL + gain_offset; for the AD603A, the gain range is 0-40dB corresponding to VCTL of 0V to 1V; the 25mV/dB scaling means that a 1V change in control voltage produces a 40dB gain change; (3) Constant Bandwidth – because the variable attenuation occurs before the fixed-gain amplifier, the bandwidth is determined solely by the fixed-gain amplifier characteristics; the attenuator is purely resistive and has no bandwidth limitation; this results in a constant 90MHz -3dB bandwidth regardless of the gain setting; (4) Low Noise – the input-referred noise voltage density of 1.3nV/rtHz at maximum gain is set by the thermal noise of the attenuator ladder resistance at the lowest attenuation setting; as gain decreases, the attenuator increases the source resistance seen by the amplifier, increasing the input-referred noise; (5) Cascading – two AD603 devices can be cascaded by connecting the output of the first stage to the input of the second; in this configuration, the gain ranges add (0+0=0dB minimum, 40+40=80dB maximum), and the total gain control range is 80dB.

Pin Description: AD603ARZ-REEL7 Pin Definition and Functions
Pin Name Function
1 GPOS Gain control positive input
2 GNEG Gain control negative input
3 VINP Signal input (high impedance)
4 COMM Common (ground for signal and control)
5 FDBK Feedback node (connect to VOUT for 0-40dB range)
6 VNEG Negative supply (-5V)
7 VOUT Signal output
8 VPOS Positive supply (+5V)
Application Scenarios: In which products and applications is AD603ARZ-REEL7 used
  • Ultrasound TGC: time-gain compensation sweeps 0-40dB during echo reception to equalize near/far signal amplitudes
  • RF AGC loop: AD603 as IF VGA with detector feedback for constant-output automatic gain control in 10.7MHz IF stage
  • Radar receiver: cascaded 2x AD603 for 80dB dynamic range in X-band downconverted signal chain
  • Sonar processing: 1.3nV/rtHz noise allows detection of weak acoustic returns at long range
Alternative Models: What chips are recommended as replacements for AD603ARZ-REEL7
Manufacturer Part Number Package Notes
ADI AD603SQ CERDIP-8 Military temperature range
ADI AD8367ARMZ MSOP-10 500MHz VGA, -2.5dB to +42.5dB
ADI AD8331ACPZ LFCSP-24 Dual VGA, 120MHz, 4.7nV/rtHz
TI VCA824ID SOIC-14 710MHz VGA, +/-40dB gain

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1