Opens in a new tab

AWM3100V

0-200 sccm microbridge airflow sensor, 1-5V output, temp compensated

1957

Effective Inventory

Image for reference only

Manufacturer Part:

AWM3100V

Package:

Through-hole (4-pin, PCB mount, vertical orientation)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The AWM3100V from Honeywell is a microbridge mass airflow sensor with 0-200 sccm range, 1-5V analog output, and built-in temperature compensation in a through-hole package.

Key Specifications

Function Microbridge Mass Airflow Sensor
Flow Range 0 to 200 sccm (standard cm3/min)
Output Type Analog Voltage (1V to 5V)
Supply Voltage 10 VDC (+/-0.5V)
Supply Current 15 mA (max)
Response Time 1 ms (typical)
Operating Temperature -25 to +85 C
Pressure Rating 25 psi (max)
Media Compatibility Clean, dry gases (air, N2, etc.)
Repeatability +/-0.5% of full scale (typical)
Package Through-hole (4-pin)

Features

  • 0-200 sccm flow measurement range
  • 1-5V linear analog output
  • Built-in temperature compensation
  • 1ms fast response time
  • Low power consumption (15mA max)
  • Compact through-hole package

Applications

  • Medical ventilation and respirators
  • Gas flow measurement in analytical instruments
  • Process control flow monitoring
  • HVAC air flow sensing
Product Introduction: AWM3100V Product Introduction

The AWM3100V from Honeywell is a microbridge mass airflow sensor from the AWM3000 series, designed for measuring gas flow rates from 0 to 200 standard cubic centimeters per minute (sccm). The sensor uses Honeywell’s microbridge thermal flow sensing technology, where a micro-machined silicon chip contains a heated element and two thermopile sensors arranged upstream and downstream of the heating element. As gas flows over the chip, it carries heat from the upstream sensor to the downstream sensor, creating a differential temperature proportional to the mass flow rate. The built-in signal conditioning circuitry provides a linear 1-5V analog output proportional to flow rate, with 1V corresponding to zero flow and 5V corresponding to 200 sccm full scale. The integrated temperature compensation ensures stable output over the -25 to +85C operating range, eliminating the need for external temperature correction. The 1ms response time enables real-time flow monitoring and control in dynamic applications such as medical ventilation. The sensor is calibrated for air and nitrogen at standard conditions (25C, 101.3kPa), and correction factors are available for other clean, dry gases. The AWM3100V is not bidirectional; for bidirectional flow measurement, the AWM3200V (-200 to +200 sccm) should be used.

Working Principle: AWM3100V Working Principle

The AWM3100V operates using Honeywell’s microbridge thermal flow sensing technology. Key subsystems include: (1) Microbridge Sensing Element – a micro-machined silicon chip contains a central heating element and two thermopile temperature sensors positioned upstream and downstream; in zero-flow conditions, the symmetric temperature distribution produces equal signals from both thermopiles; when gas flows, it convects heat from the upstream sensor to the downstream sensor, creating a temperature differential proportional to the mass flow rate; (2) Signal Conditioning – an on-chip ASIC amplifies the differential thermopile signal, applies temperature compensation based on the ambient temperature measured by the heating element resistance, and produces a linear 1-5V output; the output voltage follows VOUT = 1V + (4V x FLOW/200sccm); (3) Temperature Compensation – the heating element resistance varies with ambient temperature; the ASIC uses this information to adjust the output, maintaining accuracy over the -25 to +85C range; (4) Linearization – the raw thermopile signal has a non-linear relationship to flow rate (approximately square-root at higher flows); the ASIC applies digital linearization to produce a linear 1-5V output; (5) Response Time – the small thermal mass of the microbridge element allows the sensor to respond to flow changes in approximately 1ms, much faster than traditional thermal mass flow sensors with larger sensing elements.

Pin Description: AWM3100V Pin Definition and Functions
Pin Name Function
1 V+ Supply voltage (10VDC +/-0.5V)
2 GND Ground
3 VOUT Analog output (1V at 0 sccm, 5V at 200 sccm)
4 GND Ground (connected to pin 2 internally)
Application Scenarios: In which products and applications is AWM3100V used
  • Medical ventilator: 0-200 sccm range covers patient breathing flow rates, 1ms response for breath detection, 1-5V output to ADC
  • Gas analyzer: measure carrier gas flow in chromatography, temperature compensated for lab environment variations
  • Process control: monitor gas flow in semiconductor manufacturing, clean dry nitrogen compatible
  • HVAC: measure air flow in ventilation ducts for demand-controlled ventilation
Alternative Models: What chips are recommended as replacements for AWM3100V
Manufacturer Part Number Package Notes
Honeywell AWM3200V Through-hole Bidirectional -200 to +200 sccm
Honeywell AWM3300V Through-hole Higher range 0-1000 sccm
Sensirion SFM3000 DIP-8 Digital I2C output, 200 slm
TDK FS1012CL-1010-5V-R DIP Thermal mass flow, 10 slm

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1