Opens in a new tab

SP3220EEY-L/TR

3.3V RS-232 3Tx/5Rx transceiver, auto power-down, 120kbps, SSOP-28

7018

Effective Inventory

Image for reference only

Manufacturer Part:

SP3220EEY-L/TR

Package:

28-SSOP (5.3 x 10.2 x 1.75 mm, EY package, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The SP3220EEY-L/TR from Sipex/MaxLinear is a 3.3V RS-232 transceiver with 3 drivers and 5 receivers in a 28-lead SSOP package, meeting EIA/TIA-232-F standards with 120kbps data rate.

Key Specifications

Function 3.3V RS-232 Transceiver (3Tx/5Rx)
Supply Voltage 3.0V to 5.5V (single supply)
Drivers (Transmitters) 3
Receivers 5
Data Rate 120 kbps (min), 250 kbps (typ)
ESD Protection +/-15kV HBM, +/-8kV IEC 61000-4-2
Charge Pump Integrated (doubles/inverts supply)
Auto Power-Down Yes (1uA shutdown current)
Package 28-SSOP (5.3mm width)
Operating Temperature -40 to +85 C

Features

  • 3.3V single supply operation with integrated charge pump
  • 3 drivers + 5 receivers for full serial port plus mouse
  • Auto power-down when no valid RS-232 signal present
  • +/-15kV ESD protection on RS-232 pins

Applications

  • Serial communication ports
  • Handheld devices with RS-232
  • Point-of-sale terminals
  • Industrial serial interfaces
Product Introduction: SP3220EEY-L/TR Product Introduction

The SP3220EEY-L/TR from Sipex (now MaxLinear) is a 3.0V to 5.5V powered RS-232 transceiver that provides 3 drivers and 5 receivers in a single 28-lead SSOP package. The 3-driver/5-receiver configuration is specifically designed for serial port applications that require the standard serial port signals (TX, RX, RTS, CTS, DTR, DSR, DCD, RI) plus a PS/2 mouse port, making it a popular choice for laptop and notebook computer serial port implementations. The integrated charge pump uses four external 0.1uF capacitors to generate the +/-5.5V (minimum) RS-232 voltage levels from a single 3.0V to 5.5V supply, eliminating the need for dual +/-12V supplies traditionally required for RS-232 communication. The charge pump voltage doubler and inverter operate at a high internal frequency to minimize capacitor size. The auto power-down feature monitors the RS-232 receiver inputs; when no valid RS-232 signal is detected on any receiver for approximately 30 seconds, the device enters a low-power shutdown mode consuming only 1uA, making it ideal for battery-powered devices. The device automatically wakes up when a valid RS-232 signal returns. The +/-15kV HBM and +/-8kV IEC 61000-4-2 ESD protection on the RS-232 pins provides robust protection against electrostatic discharge during cable connection and disconnection. The 120kbps minimum data rate supports all standard RS-232 baud rates up to 115.2kbps.

Working Principle: SP3220EEY-L/TR Working Principle

The SP3220EEY-L/TR operates as an RS-232 level translator with integrated charge pump. Key subsystems include: (1) Charge Pump – a voltage doubler circuit uses two external capacitors (C1, C2) to double VCC to approximately 2xVCC, and a voltage inverter uses two more capacitors (C3, C4) to invert the doubled voltage to approximately -2xVCC; with a 3.3V supply, the charge pump generates approximately +5.5V and -5.5V, which meet the +/-5V minimum RS-232 output requirement; the charge pump operates at an internal oscillator frequency of approximately 300kHz; (2) Drivers – three inverting level translators convert TTL/CMOS logic levels (0V/3.3V) to RS-232 levels (+5.5V/-5.5V); the drivers have a typical output swing of +/-5.4V with a 3.3V supply and 3kOhm/1000pF RS-232 load; the drivers are current-limited and can be forced to opposite polarity by an active RS-232 signal without damage; (3) Receivers – five inverting level translators convert RS-232 levels (+/-3V to +/-15V) to TTL/CMOS logic levels; the receivers have a 0.8V hysteresis for noise immunity; the input threshold is 0.8V to 2.4V for standard TTL compatibility; the receiver inputs can withstand +/-25V without damage; (4) Auto Power-Down – the receiver input monitor circuit checks if any valid RS-232 signal (more positive than approximately 2.7V or more negative than -2.7V) is present on any receiver input; if no signal is detected for approximately 30 seconds, the charge pump and drivers are disabled, reducing supply current to 1uA; the receivers remain active at reduced sensitivity to detect when a signal returns.

Pin Description: SP3220EEY-L/TR Pin Definition and Functions
Pin Name Function
1-3 DIN1-DIN3 Driver TTL inputs
4-6 ROUT1-ROUT3 Receiver TTL outputs
7 GND Ground
8 VCC Supply (3.0V to 5.5V)
9 V+ Charge pump doubled voltage (+5.5V)
10 V- Charge pump inverted voltage (-5.5V)
11 C1+, C1- Charge pump capacitor 1
12 C2+, C2- Charge pump capacitor 2
13-15 DOUT1-DOUT3 Driver RS-232 outputs
16-20 RIN1-RIN5 Receiver RS-232 inputs
Application Scenarios: In which products and applications is SP3220EEY-L/TR used
  • Laptop serial port: 3Tx/5Rx provides full serial port (TX, RX, RTS, CTS, DTR, DSR, DCD, RI) plus mouse interface
  • Handheld device: 3.3V supply, auto power-down to 1uA when cable disconnected, +/-15kV ESD for hot-plug
  • POS terminal: RS-232 interface for receipt printer and barcode scanner on same device
Alternative Models: What chips are recommended as replacements for SP3220EEY-L/TR
Manufacturer Part Number Package Notes
MaxLinear SP3232ECA-L/TR SSOP-16 2Tx/2Rx, 3.3V, smaller package
TI MAX3232EIPWR TSSOP-16 2Tx/2Rx, 3.3V, pin-compatible
ADI ADM3232EARUZ TSSOP-20 2Tx/2Rx, 3.3V, ESD protected

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1