Opens in a new tab

STWD100NYWY3F

3.3ms standalone watchdog timer, 7uA, open-drain WDO, SOT-23-5

7606

Effective Inventory

Image for reference only

Manufacturer Part:

STWD100NYWY3F

Package:

SOT-23-5 (2.9 x 1.6 x 1.1 mm, YWY package)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The STWD100NYWY3F from STMicroelectronics is a standalone watchdog timer with 3.3ms typical timeout, watchdog input and output, and SOT-23-5 package for safety-critical microcontroller monitoring.

Key Specifications

Function Standalone Watchdog Timer
Supply Voltage 2.7V to 5.5V
Watchdog Timeout 3.3 ms (typical), 1.7ms to 6.3ms (range)
Watchdog Input (WDI) Edge-triggered
Watchdog Output (WDO) Active low, open-drain
Enable (EN) Active high
Supply Current 7 uA (typical)
Package SOT-23-5
Operating Temperature -40 to +125 C

Features

  • 3.3ms typical watchdog timeout
  • Ultra-low supply current (7uA)
  • Open-drain WDO output for flexible connection
  • Edge-triggered WDI input

Applications

  • Microcontroller supervision
  • Safety-critical system monitoring
  • Automotive ECU watchdog
  • Industrial controller fault detection
Product Introduction: STWD100NYWY3F Product Introduction

The STWD100NYWY3F from STMicroelectronics is a standalone hardware watchdog timer designed to monitor microcontroller operation and reset the system if the software fails to periodically service the watchdog. Unlike software-based watchdog implementations inside MCUs, the STWD100 is an independent hardware device that continues to function even if the MCU’s internal clock or software fails completely. The 3.3ms typical timeout period requires the MCU to toggle the WDI (Watchdog Input) pin at least every 3.3ms to prevent a watchdog reset; if the MCU fails to toggle WDI within the timeout window (1.7ms to 6.3ms over temperature and voltage), the WDO (Watchdog Output) pin goes low, signaling a fault condition. The WDO open-drain output can be connected directly to the MCU’s reset pin or to a power supervisor’s MR (Manual Reset) input. The edge-triggered WDI input accepts any logic transition (rising or falling edge) as a valid watchdog service pulse, making it compatible with any GPIO pin that can be toggled. The 7uA typical supply current is low enough for battery-powered applications. The EN (Enable) pin allows the watchdog to be disabled during system initialization or low-power sleep modes, preventing false watchdog resets during periods when the MCU is intentionally not servicing the watchdog. The extended -40 to +125C temperature range supports automotive and industrial applications. The STWD100 is pin-compatible with the TPS3823 watchdog timer from TI.

Working Principle: STWD100NYWY3F Working Principle

The STWD100NYWY3F operates as an independent hardware watchdog timer. Key subsystems include: (1) Internal Oscillator – a precision RC oscillator generates the timing reference for the watchdog timeout; the oscillator runs continuously when EN is high; the 3.3ms typical timeout is derived from this oscillator; the timeout varies from 1.7ms to 6.3ms over the full temperature and voltage range; (2) Watchdog Counter – a counter is clocked by the internal oscillator; when the counter reaches its terminal count (timeout), the WDO output is asserted low; each edge (rising or falling) on the WDI pin resets the counter to zero, restarting the timeout period; if WDI transitions occur before the counter reaches timeout, the watchdog never triggers; (3) WDO Output – an open-drain output that goes low when the watchdog timer expires (WDI not serviced within timeout); the open-drain configuration allows wired-OR connection with other reset sources (power supervisors, manual reset buttons); an external pull-up resistor (typically 10kOhm) is required; WDO remains low until WDI is serviced or EN is toggled; (4) EN Input – when EN is low, the watchdog is disabled (counter is held in reset, WDO is high-impedance); when EN goes high, the watchdog timer starts counting from zero; this allows the MCU to disable the watchdog during initialization or sleep; (5) Power-On Reset – an internal POR circuit keeps WDO low during power-up until VCC exceeds the POR threshold, ensuring a clean system reset on power application.

Pin Description: STWD100NYWY3F Pin Definition and Functions
Pin Name Function
1 WDO Watchdog output (active low, open-drain)
2 GND Ground
3 EN Enable (active high)
4 WDI Watchdog input (edge-triggered)
5 VCC Supply (2.7V to 5.5V)
Application Scenarios: In which products and applications is STWD100NYWY3F used
  • Automotive ECU: STWD100 monitors MCU, WDO connects to system reset supervisor, MCU must toggle WDI every 3ms or ECU resets for safety
  • Industrial PLC: hardware watchdog ensures PLC recovers from software hang, open-drain WDO wired-OR with power-fail reset
  • Battery-powered sensor: 7uA current negligible in sleep budget, EN pin disables watchdog during deep sleep, re-enables on wake
Alternative Models: What chips are recommended as replacements for STWD100NYWY3F
Manufacturer Part Number Package Notes
TI TPS3823-33DBVR SOT-23-5 Pin-compatible, 1.6s timeout
TI TPS3828-50DBVR SOT-23-5 Watchdog with push-pull WDO
onsemi CAT811TTBI-GT3 SOT-23-5 Similar watchdog function

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1