Opens in a new tab

TPS51200DRCR

DDR termination regulator, +/-2A VTT, VREF output, VSON-10

4540

Effective Inventory

Image for reference only

Manufacturer Part:

TPS51200DRCR

Package:

VSON-10 (3 x 3 x 0.8 mm, DRC package, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The TPS51200DRCR from Texas Instruments is a DDR termination regulator with 2A sink/source capability, VTT and VREF outputs, and 3.3V/5V supply in a 10-pin VSON package.

Key Specifications

Function DDR Termination Regulator (VTT + VREF)
Input Supply (VDD) 3.3V or 5V
VTT Output Current +/-2A (sink and source)
VTT Output Voltage Half of VDDQ (0.9V for DDR3 at 1.5V VDDQ)
VREF Output VDDQ/2 (1mA drive capability)
Accuracy +/-10mV VTT, +/-5mV VREF
Shutdown Current 0.5uA (typical)
Package VSON-10 (3mm x 3mm)
Operating Temperature -40 to +85 C

Features

  • 2A sink/source VTT termination output
  • Simultaneous VTT and VREF generation
  • +/-10mV VTT accuracy

Applications

  • DDR/DDR2/DDR3 memory termination
  • Memory module VTT power
Product Introduction: TPS51200DRCR Product Introduction

The TPS51200DRCR from Texas Instruments is a dedicated DDR memory termination regulator that generates both the VTT termination voltage and the VREF reference voltage required by DDR, DDR2, and DDR3 memory systems. The VTT output is a low-impedance voltage source set to half the VDDQ supply voltage (e.g., 0.9V for DDR3 with 1.8V VDDQ, or 0.75V for DDR3L with 1.5V VDDQ), capable of sourcing and sinking up to 2A. This sink/source capability is essential for DDR termination, where data line transitions cause current to flow both into and out of the termination voltage rail. The +/-10mV VTT accuracy ensures reliable signal integrity across the memory bus. The VREF output provides a separate VDDQ/2 reference with +/-5mV accuracy for the memory controller’s reference input. The device operates from a 3.3V or 5V input supply and tracks the VDDQ voltage through the VSNS input pin, ensuring VTT and VREF remain at exactly VDDQ/2 even as VDDQ varies during power-up and power-down sequences. The PGOOD output indicates when VTT is within specification. The S5 (sleep) pin reduces power consumption during system sleep modes.

Working Principle: TPS51200DRCR Working Principle

The TPS51200DRCR operates as a DDR termination voltage regulator. Key subsystems include: (1) VTT Regulator – a linear regulator with integrated N-channel and P-channel MOSFETs for sourcing and sinking current; the output voltage is set to VSNS/2 (half the sensed VDDQ voltage) by an internal resistor divider; the regulator uses a high-gain error amplifier to maintain VTT at the target value with +/-10mV accuracy; the 2A sink/source capability is achieved by paralleling multiple MOSFET segments; (2) VREF Buffer – a precision voltage buffer that generates VDDQ/2 with +/-5mV accuracy; the VREF output is derived from the same VSNS/2 divider as VTT but through a separate buffer with lower drive capability (1mA); the separate buffer prevents VTT load transients from affecting the VREF stability; (3) VSNS Input – the VSNS pin connects to the VDDQ rail and is used by the internal divider to generate VDDQ/2; the high-impedance VSNS input draws minimal current from VDDQ; (4) PGOOD Output – a power-good open-drain output that is asserted high (after a 1ms delay) when VTT is within +/-5% of the target value; PGOOD de-asserts immediately when VTT goes out of specification; (5) S5 (Sleep) Input – when S5 is asserted high, the VTT and VREF outputs are disabled and the device enters low-power mode (0.5uA shutdown current); this is used during system sleep states where memory is in self-refresh mode and termination is not needed.

Pin Description: TPS51200DRCR Pin Definition and Functions
Pin Name Function
1 VDD Input supply (3.3V or 5V)
2 GND Ground
3 S5 Sleep mode enable (active high)
4 VSNS VDDQ sense input (connects to memory VDDQ rail)
5 VREF VDDQ/2 reference output (for memory controller)
6 PGOOD Power good output (open-drain)
7 VTT Termination voltage output (+/-2A)
8 GND Ground (power)
9 GND Ground (thermal pad)
Application Scenarios: In which products and applications is TPS51200DRCR used
  • DDR3 memory system: TPS51200 generates VTT=0.75V (for DDR3L at 1.5V VDDQ) and VREF=0.75V for the memory controller’s reference input
  • Embedded DDR2: VTT=0.9V from 1.8V VDDQ, 2A handles up to 4 DIMMs of termination current
Alternative Models: What chips are recommended as replacements for TPS51200DRCR
Manufacturer Part Number Package Notes
TI TPS51200AQCQR WQFN-10 Improved version with better accuracy
TI TPS51100DRBR VSON-10 1.5A version, lower current
Richtek RT9199-18GB MSOP-8 DDR termination regulator alternative

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1