Opens in a new tab

IRF840PBF

N-Channel MOSFET, 500V, 8A, 0.85 Ohm, TO-220AB

10940

Effective Inventory

Image for reference only

Manufacturer Part:

IRF840PBF

Package:

TO-220AB (10.54 x 4.69 x 15.24 mm, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The IRF840PBF from Infineon is an N-channel power MOSFET rated at 500V VDSS with 8A drain current and 0.85 Ohm RDS(on). In TO-220AB package, this HEXFET device is widely used in high-voltage switching applications.

Key Specifications

VDSS 500V
ID 8A @ TC=25C
RDS(on) 0.85 Ohm max
VGS(th) 2.0 to 4.0V
Qg 63nC typical
PD 125W @ TC=25C
Package TO-220AB

Features

  • HEXFET power MOSFET technology
  • 500V breakdown for off-line applications
  • Fully avalanche rated
  • Dynamic dv/dt rated
  • Lead-free, RoHS compliant

Applications

  • Switch-mode power supplies
  • Motor drive inverters
  • High-voltage DC-DC converters
  • Power factor correction circuits
Product Introduction: IRF840PBF Product Introduction

The IRF840PBF is a classic N-channel enhancement-mode power MOSFET from the Infineon HEXFET family. With 500V drain-source rating and 8A continuous current, it is a workhorse device in off-line SMPS, motor drives, and power conversion systems. The 0.85 Ohm on-resistance and 63nC gate charge suit moderate-frequency switching. TO-220AB package provides 125W dissipation when heatsinked.

Working Principle: IRF840PBF Working Principle

The IRF840PBF operates as a voltage-controlled N-channel MOSFET. (1) Off: No channel exists when VGS is below threshold, blocking up to 500V. (2) On: VGS above threshold creates inversion layer, RDS(on) = 0.85 Ohm max. (3) Switching: Qg=63nC must be supplied/removed for transitions. (4) Avalanche: Fully rated to absorb inductive kickback energy without external clamping.

Pin Description: IRF840PBF Pin Definition and Functions
Pin Name Function
1 Gate Gate control input
2 Drain Drain terminal (tab)
3 Source Source terminal
Application Scenarios: In which products and applications is IRF840PBF used
  • Off-line SMPS: 500V rating for 110V/220V AC-input power supplies
  • Motor drive: 8A capability for small BLDC/PMSM motors
  • HV DC-DC converters: Forward and flyback topologies for telecom power
  • Lighting ballasts: High-voltage fluorescent and HID lamp circuits
Alternative Models: What chips are recommended as replacements for IRF840PBF
Manufacturer Part Number Package Notes
Infineon IRF840LPBF D2PAK SMD version
ST STW8NM50 TO-247 500V, 8A, lower RDS(on)
Vishay IRF840A TO-220AB Direct equivalent
Infineon IRFP460PBF TO-247 500V, 20A, higher current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1