Opens in a new tab

BSP742R

Smart high-side switch, 350mOhm, 0.4A, 5-34V, PROFET 12V, SO-8

13666

Effective Inventory

Image for reference only

Manufacturer Part:

BSP742R

Package:

PG-DSO-8 (5.0 x 4.0 mm, SO-8)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BSP742R from Infineon is a single-channel smart high-side power switch in the Classic PROFET 12V family. With 350mOhm on-resistance and 0.4A nominal load current, it integrates comprehensive protection and diagnostics in PG-DSO-8 package.

Key Specifications

Ron 350mOhm typical
Nominal Load Current 0.4A
Operating Voltage 5V to 34V
Overvoltage Protection 41V
Turn-On Time 140us max
Standby Current 26uA typical
Package PG-DSO-8 (SO-8)
Operating Temperature -40 to +150C

Features

  • Overload and short circuit protection
  • Thermal shutdown with auto-restart
  • Overvoltage protection including load dump
  • Open drain diagnostic output
  • Open load detection in OFF-state
  • CMOS compatible input, AEC qualified

Applications

  • Body Control Module
  • Seat and mirror control
  • Automotive relay replacement
  • Start-stop transmission systems
Product Introduction: BSP742R Product Introduction

The BSP742R is a single-channel intelligent high-side power switch from Infineon Classic PROFET 12V family in Smart SIPMOS technology. It integrates N-channel vertical power FET with charge pump, CMOS input, and diagnostic feedback. Embedded protections include overload, current limitation, short circuit, thermal shutdown with restart, overvoltage (including load dump), and reverse battery protection. With 350mOhm on-resistance and 0.4A nominal current, it replaces electromechanical relays in 12V/24V automotive DC applications.

Working Principle: BSP742R Working Principle

The BSP742R integrates power stage with control logic and protection. (1) Power: N-channel vertical MOSFET driven by internal charge pump for low Ron. (2) Control: CMOS-compatible IN pin activates switch; 26uA standby when off. (3) Protection: Current limit at 0.4A min; thermal shutdown at 150C with auto-restart; overvoltage clamp at 41V. (4) Diagnostics: Open-drain ST pin indicates faults; open load detection in OFF-state. (5) Reverse protection: External GND resistor provides reverse battery protection.

Pin Description: BSP742R Pin Definition and Functions
Pin Name Function
1 GND Logic ground
2 IN Input (high = ON)
3 OUT Output to load
4 ST Diagnostic feedback (open drain)
5-8 VBB Positive supply (4 pins)
Application Scenarios: In which products and applications is BSP742R used
  • BCM: Drives interior lights, mirror heaters, relay coils with protection and diagnostics
  • Seat control: Switches heating elements and small motors with thermal protection
  • Decentralized light modules: Self-protecting smart switches replace fuses and relays
  • Start-stop systems: 26uA standby minimizes battery drain during engine-off
Alternative Models: What chips are recommended as replacements for BSP742R
Manufacturer Part Number Package Notes
Infineon BSP752R PG-DSO-8 Lower RDS(on)
Infineon BTS6143D PG-DSO-8 PROFET+2
ST VN5T006ASPTR-E PowerSSO-12 Single, 60mOhm
onsemi NCV84160 SO-8 Single HSD, 160mOhm

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1